Introduction
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Grandeur 848563 Hardware Arc One-Piece Dummy Handleset. Designed for durability and aesthetic appeal, this handleset features a vintage brass finish and is intended for non-functional applications on doors, typically on the inactive leaf of a double entry door.
Please read these instructions carefully before beginning installation to ensure proper setup and long-lasting performance.
Setup and Installation
1. Before You Begin
- Verify all components are present: Exterior one-piece dummy handleset trim with grip, interior dummy tall plate trim, and screws.
- Ensure the door is suitable for a dummy handleset, especially if it is 84 inches or higher, where a standard height plate might not look to scale.
- Confirm the handleset is intended for the non-functional side of a double entry door, as it has no locking or internal mechanism.
2. Tools Required
- Pencil
- Measuring Tape
- Drill
- Screwdriver (Phillips head recommended)
- Drilling template (included)
3. Installation Steps
- Prepare the Door: Use the included drilling template to mark the precise locations for mounting holes on your door.
- Drill Holes: Carefully drill pilot holes at the marked locations. Ensure holes are straight and clean.
- Install Exterior Handleset: Position the exterior one-piece dummy handleset trim with grip onto the door, aligning it with the drilled holes.
- Install Interior Trim: Place the interior dummy tall plate trim on the inside of the door, aligning it with the exterior handleset.
- Secure Components: Insert the provided screws through the interior trim and into the exterior handleset. Tighten screws firmly but do not overtighten, which could damage the door or handleset.
- Final Check: Ensure the handleset is securely mounted and sits flush against the door surface.
Figure 1: Grandeur 848563 Hardware Arc One-Piece Dummy Handleset, showing the exterior handleset with S-grip and the interior knob and plate.
Operating Instructions
The Grandeur 848563 is a dummy handleset, meaning it does not have any internal locking mechanism or operational latch. Its primary function is to provide a fixed pull handle and a decorative knob for the inactive leaf of a double door or for purely aesthetic purposes.
- To open or close the door, simply use the fixed grip handle on the exterior or the knob on the interior to pull or push the door.
- This handleset does not require keys or any turning action for operation.
Maintenance
Proper care will help maintain the beauty and longevity of your Grandeur handleset.
- Cleaning: Clean the handleset regularly with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or polishes that may damage the vintage brass finish.
- Finish Protection: Do not apply paint or other coatings to the handleset, as this may void the warranty and affect the finish.
- Inspection: Periodically check the mounting screws to ensure they remain tight. If any screws are loose, gently tighten them.
Troubleshooting
This section addresses common issues you might encounter with your dummy handleset.
| Problem | Possible Cause | Solution |
|---|---|---|
| Handleset feels loose or wobbly. | Mounting screws are loose. | Gently tighten all visible mounting screws with a Phillips head screwdriver. Do not overtighten. |
| Finish appears dull or discolored. | Accumulation of dirt or residue; exposure to harsh chemicals. | Clean the handleset with a soft, damp cloth. Avoid using abrasive cleaners or polishes. Ensure it is not exposed to corrosive substances. |
| Handleset does not sit flush against the door. | Improper installation or uneven drilling. | Recheck screw alignment and tightness. If the issue persists, re-evaluate the drilled holes for accuracy. |
Specifications
| Attribute | Detail |
|---|---|
| Model Number | 848563 |
| Brand | Grandeur |
| Type | One-Piece Dummy Handleset |
| Finish | Vintage Brass |
| Material | Solid Forged Brass |
| Dimensions (L x W x H) | 1.27 x 7.62 x 48.26 cm (0.5 x 3 x 19 inches) |
| Item Weight | 3.18 kg (7 lbs) |
| Usage | Outside (typically non-functional side of double entry door) |
| Special Features | Easy to Install, No locking or internal mechanism |
| Included Components | Exterior one piece dummy handleset trim with grip, interior dummy tall plate trim, and screws |
Warranty Information
This Grandeur handleset comes with a Lifetime Warranty. For specific terms and conditions of the warranty, please refer to the documentation provided with your purchase or contact Grandeur customer support.
Customer Support
If you have any questions, require assistance with installation, or need to report a defect, please contact Grandeur customer support. Refer to the contact information provided on the product packaging or the official Grandeur website for the most up-to-date support details.
