1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Grandeur 837444 Fifth Avenue Tall Plate Baguette Clear Crystal Knob. This product is designed for interior doors requiring a left-handed privacy function, featuring a 2.375-inch backset and an Antique Pewter finish. Please read all instructions carefully before beginning installation to ensure proper function and longevity of your door hardware.
2. Safety Information
- Always wear appropriate safety gear, such as safety glasses, during installation.
- Use the correct tools for each step to prevent damage to the product or injury.
- Keep small parts out of reach of children.
- Ensure the door is securely supported during installation to prevent accidental closure or movement.
- If you are unsure about any step, consult a qualified professional.
3. Package Contents
Verify that all components listed below are present before beginning installation.
Image: The Grandeur Fifth Avenue Tall Plate Baguette Clear Crystal Knob, featuring an antique pewter finish on the tall plate and a clear crystal knob. This image displays the complete assembly of the door hardware.
- Door knob (Baguette Clear Crystal)
- Tall plate for both sides of the door (Fifth Avenue, Antique Pewter)
- Latch mechanism
- Privacy spindle
- Privacy pin
- Strike plate
- Mounting screws
- Drilling template (not explicitly listed but implied by feature bullets)
4. Installation Instructions
This door hardware is designed for doors that are 84 inches or higher. A drilling template and mounting hardware are included for installation.
4.1. Preparing the Door
- If replacing existing hardware, remove the old knob and latch mechanism.
- Use the provided drilling template to mark the necessary holes on the door face and edge. Ensure the backset measurement is 2.375 inches.
- Drill holes as indicated by the template. For a left-handed privacy knob, ensure the door hinges are on the left side when viewed from the exterior.
4.2. Installing the Latch Mechanism
- Insert the latch mechanism into the edge bore hole of the door.
- Secure the latch mechanism with the provided screws. Ensure the latch bolt faces the correct direction for door closure.
4.3. Installing the Knob and Plates
- Place one tall plate on each side of the door, aligning them with the drilled holes.
- Insert the privacy spindle through the latch mechanism and the tall plates.
- Attach the door knobs to the spindle, ensuring the privacy pin hole on the interior knob is positioned correctly (on the right side for a left-handed privacy knob).
- Secure the knobs and plates using the mounting screws. Do not overtighten.
- Install the strike plate on the door frame, aligning it with the latch bolt.
- Test the knob's operation and privacy function to ensure smooth movement and proper locking.
5. Operation
5.1. Opening the Door
- To open the door from either side, simply turn the knob. The latch bolt will retract, allowing the door to open.
5.2. Engaging Privacy Function (Locking)
- From the interior side of the door, locate the privacy pin on the right side of the knob.
- Push the privacy pin inward to engage the locking mechanism. The exterior knob will now be fixed, preventing entry.
5.3. Disengaging Privacy Function (Unlocking)
- From the interior, turn the knob to disengage the privacy lock.
- From the exterior, a small tool (e.g., a paperclip) can be inserted into the emergency release hole on the exterior knob to unlock the door in case of accidental lockout.
6. Maintenance
- Cleaning: Clean the antique pewter finish and crystal knob with a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Lubrication: Periodically, a small amount of silicone-based lubricant can be applied to the latch mechanism to ensure smooth operation. Do not use oil-based lubricants, which can attract dust and debris.
- Tightening: Check mounting screws periodically and tighten if necessary to prevent wobbling or misalignment.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Knob is stiff or difficult to turn. | Lack of lubrication; misaligned components. | Apply silicone lubricant to the latch mechanism. Check for proper alignment of the spindle and plates. |
| Privacy function does not engage or disengage. | Privacy pin/spindle misalignment; debris in mechanism. | Ensure the privacy spindle is correctly installed. Clean any debris from the privacy mechanism. |
| Door does not latch properly. | Strike plate misalignment; latch bolt obstruction. | Adjust the strike plate on the door frame. Check for any obstructions preventing the latch bolt from extending fully. |
| Knob feels loose or wobbly. | Loose mounting screws. | Tighten all mounting screws securely. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Grandeur |
| Model Number | 837444 |
| Product Type | Door Knob with Tall Plate |
| Knob Style | Baguette Clear Crystal |
| Plate Style | Fifth Avenue Tall Plate |
| Function | Left-Handed Privacy |
| Backset | 2.375 inches |
| Finish | Antique Pewter |
| Material | Solid, Forged Brass (Handle Material) |
| Item Weight | 5.75 Pounds |
| Product Dimensions | 2.25 x 2.63 x 11 inches |
| Special Features | Easy to Install, Sturdy, Ideal for 84"+ doors |
| Included Components | Door knob, tall plates, latch mechanism, privacy spindle, privacy pin, strike plate, mounting screws |
9. Warranty and Support
9.1. Warranty Information
This Grandeur product is backed by a Lifetime Warranty. This warranty covers defects in material and workmanship under normal use. For specific terms and conditions, please refer to the official Grandeur warranty documentation or contact customer support.
9.2. Customer Support
For technical assistance, replacement parts, or warranty claims, please contact Grandeur Hardware customer support. Contact information can typically be found on the manufacturer's official website or product packaging.
