Futaba T4PX Small Handle Rubber Grip Instruction Manual

1. Product Overview

This document provides essential information for the proper use and maintenance of the Futaba T4PX Small Handle Rubber Grip. This genuine Futaba accessory is designed to enhance the ergonomics and feel of your T4PX transmitter.

Figure 1.1: Main view of the Futaba T4PX Small Handle Rubber Grip. This image shows the overall shape and texture of the black rubber grip, designed for ergonomic handling.

1.1 Package Contents

• 1 x Futaba T4PX Small Handle Rubber Grip
• (No additional accessories or tools are typically included with this part.)

2. Setup and Installation

The Futaba T4PX Small Handle Rubber Grip is designed for straightforward installation onto the Futaba T4PX transmitter. Ensure your transmitter is powered off before beginning installation.

2.1 Compatibility

This grip is specifically designed for the Futaba T4PX Transmitter. It may not be compatible with other transmitter models.

2.2 Installation Steps

1. Prepare the Transmitter: Ensure the Futaba T4PX transmitter is clean and free of debris where the grip will be attached.
2. Align the Grip: Carefully align the rubber grip with the handle section of your T4PX transmitter. The grip is designed to slide or snap into place.


Figure 2.1: Bottom view of the grip, showing the internal channel designed to fit over the transmitter's handle. This view highlights the precise molding for a secure fit.

3. Secure the Grip: Gently apply pressure to ensure the grip is fully seated and securely attached to the transmitter handle. It should fit snugly without any gaps or looseness.


Figure 2.2: Side profile of the grip, illustrating its ergonomic curve. This angle demonstrates how the grip is shaped to comfortably fit a user's hand.

4. Verify Installation: Once installed, gently tug on the grip to confirm it is firmly in place and will not detach during use.

3. Operating and Usage

The rubber grip is a passive component designed to improve the tactile feel and comfort of your Futaba T4PX transmitter. No specific operational steps are required for the grip itself once installed.

• The grip provides enhanced comfort during extended use.
• It offers improved traction, reducing the chance of the transmitter slipping from your hand.

4. Maintenance

Proper maintenance will extend the lifespan of your rubber grip and ensure continued comfort.

4.1 Cleaning

• Use a soft, damp cloth to wipe down the grip.
• For stubborn dirt, a mild soap solution can be used, but ensure no liquid enters the transmitter.
• Avoid harsh chemicals, abrasive cleaners, or solvents, as these can damage the rubber material.
• Ensure the grip is completely dry before prolonged storage or use.

4.2 Storage

• Store the transmitter with the grip attached in a cool, dry place, away from direct sunlight and extreme temperatures.
• Avoid storing in environments with high humidity, which can degrade rubber over time.

5. Troubleshooting

This section addresses common issues you might encounter with the rubber grip.

6. Specifications

7. Warranty and Support

Warranty information for the Futaba T4PX Small Handle Rubber Grip is typically provided by the original seller or Futaba directly. Please refer to your purchase documentation or the official Futaba website for specific warranty terms and conditions.

7.1 Customer Support

For technical assistance, installation queries, or warranty claims, please contact the retailer from whom you purchased the product or visit the official Futaba support channels. Contact information can usually be found on their official website or in the packaging of your Futaba T4PX transmitter.

Online Resources:

• Official Futaba Website: www.futabarc.com (Please note: This is a generic example URL. Always refer to the official manufacturer's website.)