Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Grandeur 843543 Hardware Arc One-Piece Handleset. This handleset features a classic design with waterfall edges and graceful curves, suitable for exterior doors. It is constructed from solid, forged brass for durability and comes in an Antique Pewter finish with an S Grip and Biarritz Knob. Please read all instructions carefully before beginning installation.
Included Components
Verify that all components are present before starting installation.
- Deadbolt latch and kit with cylinder
- Exterior one-piece handleset trim with grip
- Interior tall plate trim with turn
- Passage latch and kit
- Screws for installation
- Two keys
Image: The Grandeur Arc One-Piece Handleset in Antique Pewter finish. This image displays the complete handleset, including the exterior trim with S-grip, the Biarritz knob, and the deadbolt mechanism.
Setup and Installation
This handleset is designed for easy installation. A drilling template and mounting hardware are included.
- Prepare the Door: Ensure your door is properly prepped with the correct bore holes and backset (2.375 inches for this model). Use the provided drilling template if new holes are required. This handleset is ideal for doors 84 inches or higher.
- Install the Latches: Insert the deadbolt latch and the passage latch into the edge of the door. Secure them with the provided screws. Ensure the latches are oriented correctly for the door swing.
- Install the Exterior Handleset: Position the exterior one-piece handleset trim with the S-grip onto the door, aligning it with the latch mechanisms.
- Install the Interior Trim: Place the interior tall plate trim with the turn knob onto the door, aligning it with the exterior handleset and latches.
- Secure the Handleset: Insert and tighten the mounting screws to secure both the exterior and interior components. Ensure the handleset is level and operates smoothly.
- Install the Cylinder: Insert the deadbolt cylinder into the exterior handleset and secure it from the interior side. Test the key operation.
- Final Adjustments: Check the operation of both the deadbolt and the passage latch. Ensure they retract and extend smoothly without binding. Adjust screws as necessary.
Operation
The Grandeur 843543 Handleset is a single-cylinder lock, meaning it is operated by a key from the exterior and a thumb turn from the interior.
- Locking from Exterior: Insert the key into the exterior cylinder and turn it to extend the deadbolt. Remove the key.
- Unlocking from Exterior: Insert the key into the exterior cylinder and turn it to retract the deadbolt.
- Locking from Interior: Rotate the thumb turn on the interior trim to extend the deadbolt.
- Unlocking from Interior: Rotate the thumb turn on the interior trim to retract the deadbolt.
- Opening the Door: To open the door, depress the S-grip handle on the exterior or the Biarritz knob on the interior to retract the passage latch.
Maintenance
Proper care will ensure the longevity and appearance of your handleset.
- Cleaning: Clean the handleset regularly with a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the Antique Pewter finish.
- Lubrication: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway and latch mechanisms to ensure smooth operation. Do not use oil-based lubricants, which can attract dust and debris.
- Inspection: Periodically check all screws and fasteners for tightness. Tighten any loose screws to prevent wobbling or misalignment.
- Finish Care: The Antique Pewter finish is durable, but prolonged exposure to harsh weather conditions may affect its appearance over time.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Key turns but deadbolt does not retract/extend. | Misalignment of cylinder or latch mechanism; debris in keyway. | Check alignment of components. Apply graphite lubricant to keyway. If problem persists, re-install cylinder and latch. |
| Handle/knob is stiff or hard to turn. | Latch mechanism needs lubrication; screws are too tight. | Lubricate the latch mechanism. Loosen mounting screws slightly, then re-tighten until snug but not overly tight. |
| Door does not latch properly. | Strike plate misalignment; latch bolt not fully extending. | Adjust the strike plate on the door frame. Check for obstructions. Ensure latch is fully extending. |
| Handleset feels loose or wobbly. | Mounting screws are loose. | Tighten all mounting screws securely. |
Specifications
- Model Number: 843543
- Brand: Grandeur
- Color/Finish: Antique Pewter
- Style: Arc One-Piece Handleset with S Grip and Biarritz Knob
- Lock Type: Single Cylinder Key Lock
- Backset Size: 2.375 inches
- Material: Solid, Forged Brass
- Item Weight: 7 pounds
- Product Dimensions: 0.5 x 3 x 19 inches
- Recommended Use: Exterior Doors, ideal for doors 84 inches or higher
- UPC: 662972435435
- Manufacturer: Grandeur Hardware
Warranty and Support
This Grandeur handleset comes with a Lifetime Warranty. For warranty claims, technical assistance, or replacement parts, please contact Grandeur Hardware directly.
Manufacturer: Grandeur Hardware
Website: Visit the Grandeur Store on Amazon (for general product information)