RUPES 9.BW150H

Download PDF
Contents

Rupes Bigfoot Coarse Wool Polishing Pad User Manual

Model: 9.BW150H

1. Product Overview

The Rupes Bigfoot Coarse Wool Polishing Pads are engineered for heavy cutting applications, designed to work effectively with eccentric polishers, particularly the Rupes Mille LK900. These pads are ideal for addressing fully cured paints, gelcoat, and deep scratches, providing significant defect removal.

Rupes Bigfoot Coarse Wool Polishing Pad, front and back view

Image: Front and back view of the Rupes Bigfoot Coarse Wool Polishing Pad, showing the blue foam backing and the white wool cutting surface.

2. Key Features

  • Dual-Density Wool Construction: All pads in the coarse wool range are constructed with two different fiber lengths (8mm light blue, 6mm white), creating a double-density wool surface and a specific visible pattern. This configuration provides an excellent balance between cutting power and final finish capability compared to traditional single-density wool pads.

  • Rigid Blue Foam Interface: The blue foam of the coarse wool pad is stiffer and denser. This maximizes the transfer of tool movement to the work surface, providing better sanding and cutting performance.

  • Broad Compatibility: The new range of wool pads is compatible with all eccentric polishers, iBrid Nano, and specifically optimized for the new Rupes Mille LK900 polisher.

Close-up of the Rupes wool pad edge, showing blue foam and wool fibers

Image: Close-up view of the pad's edge, highlighting the distinct blue foam backing and the white wool fibers.

Detailed view of the blue foam layer on the Rupes polishing pad

Image: Detailed view of the blue foam layer, which provides rigidity and optimizes power transfer.

Close-up of the coarse wool surface of the Rupes polishing pad

Image: Close-up of the coarse wool surface, showing the texture designed for aggressive cutting.

3. Setup and Installation

  1. Inspect Pad: Before each use, inspect the wool pad for any damage, excessive wear, or contamination. A clean, undamaged pad ensures optimal performance and prevents marring the surface.

  2. Clean Backing Plate: Ensure the backing plate of your polisher is clean and free of debris. Any particles between the pad and the backing plate can cause uneven rotation or damage.

  3. Attach Pad: Align the hook-and-loop (Velcro) backing of the wool pad with the backing plate of your Rupes polisher (e.g., Mille LK900, eccentric polisher, iBrid Nano). Press firmly to ensure a secure attachment. The pad should be centered on the backing plate.

  4. Verify Compatibility: These pads are designed for 130/150mm backing plates. Ensure your polisher's backing plate matches the pad size for proper operation.

Diagram indicating a 125mm pad size

Image: Diagram illustrating a 125mm pad, indicating general sizing for compatibility.

Diagram showing 130mm velcro diameter and 145mm buffing diameter

Image: Diagram detailing the pad's dimensions: 130mm Velcro diameter and 145mm buffing diameter.

4. Operating Instructions

The Rupes Bigfoot Coarse Wool Pads are designed for heavy cutting and defect removal. Always follow the specific operating instructions for your polisher and the polishing compound being used.

  1. Surface Preparation: Ensure the vehicle or surface to be polished is clean, dry, and free of contaminants. Wash and decontaminate the surface thoroughly.

  2. Apply Compound: Apply a small amount of coarse polishing compound (e.g., Rupes Zephir, Quartz, or Ceramic compounds) directly to the wool pad or evenly distribute a few drops on the work surface.

  3. Initial Spreading: Place the pad flat on the surface and spread the compound at a low speed (e.g., speed setting 1-2 on your polisher) over a small section (e.g., 2x2 feet or 60x60 cm).

  4. Begin Polishing: Increase the polisher speed to the recommended setting for cutting (e.g., speed setting 3-5). Apply moderate, even pressure and move the polisher slowly in overlapping passes, ensuring the pad remains flat on the surface.

  5. Monitor Temperature: Pay attention to the surface temperature. Excessive heat can damage the paint. If the surface becomes too hot, reduce pressure or speed, or allow it to cool.

  6. Wipe Off Residue: After completing a section, wipe off the compound residue with a clean, soft microfiber towel. Inspect the results.

  7. Pad Cleaning During Use: For extended polishing sessions, clean the pad frequently using a pad brush or compressed air to remove caked-on compound and paint residue. This maintains cutting efficiency and prevents marring.

5. Maintenance and Care

  • Immediate Cleaning: After each use, clean the wool pad thoroughly. Do not allow compounds to dry and harden on the pad.

  • Washing: Hand wash pads with warm water and a dedicated pad cleaner or mild detergent. Gently agitate the wool to release trapped compound. Rinse thoroughly until water runs clear.

  • Drying: Squeeze out excess water. Allow pads to air dry completely, wool side up, away from direct sunlight or heat. Do not machine dry.

  • Storage: Store clean, dry pads in a sealed container or bag to prevent contamination from dust and debris.

  • Inspection: Regularly inspect pads for tears, excessive wear, or matted wool. Replace pads that are damaged or no longer perform effectively.

6. Troubleshooting

IssuePossible CauseSolution
Poor Cutting PerformancePad is clogged with compound/paint; Insufficient compound; Incorrect polisher speed/pressure; Pad is worn out.Clean the pad frequently; Apply more compound; Adjust polisher settings; Replace the pad.
Pad "Walking" or Vibrating ExcessivelyPad not centered on backing plate; Backing plate is dirty; Pad is damaged.Re-center the pad; Clean backing plate; Replace damaged pad.
Swirl Marks or Haze After PolishingCompound not fully broken down; Pad is contaminated; Too much pressure; Incorrect compound for pad.Work compound longer; Clean or replace pad; Reduce pressure; Ensure compound is compatible with coarse pad.

7. Specifications

  • Model Number: 9.BW150H

  • Material: Wool (dual-density), Foam (blue, rigid)

  • Pad Diameter: Approximately 130mm (Velcro), 145mm (Buffing Surface)

  • Fiber Lengths: 8mm (light blue), 6mm (white)

  • Grain Type: Coarse

  • Compatible Material: Ceramic (for compounds), Fully cured paints, Gelcoat

  • Dimensions (L x W x H): 14.48 x 13.21 x 2.54 cm (approx. 5.7 x 5.2 x 1 inches)

  • Weight: 33 grams

  • Manufacturer: Rupes

8. Warranty and Support

For information regarding warranty, technical support, or replacement parts, please refer to the official Rupes website or contact your authorized Rupes dealer. Specific warranty details are not provided in this manual.

© 2024 Rupes. All rights reserved.

This manual is for informational purposes only. Always follow safety guidelines and product instructions.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.