NAMESAKE Tanner 3-in-1 Convertible Crib Instruction Manual

1. Introduction

This manual provides essential instructions for the safe assembly, use, and maintenance of your NAMESAKE Tanner 3-in-1 Convertible Crib. This crib is designed to transition from a crib to a toddler bed and then to a daybed, accommodating your child's growth. It is Greenguard Gold Certified, ensuring low chemical emissions for a healthier indoor environment.

2. Safety Information

WARNING: Failure to follow these warnings and the assembly instructions could result in serious injury or death.

• Read all instructions before assembly and use of the crib. Keep instructions for future use.
• Do not use this crib if any parts are missing, damaged, or broken. Contact NAMESAKE for replacement parts and instructional literature if needed. Do not substitute parts.
• Ensure all bolts and fasteners are securely tightened. Periodically check all fasteners for tightness.
• The mattress used with this crib must be at least 27.25 inches (69 cm) by 51.625 inches (131 cm) with a thickness not exceeding 6 inches (15 cm).
• To prevent falls, when the child is able to pull to a standing position, set the mattress to the lowest position.
• Do not place the crib near windows where cords from blinds or drapes could strangle a child.
• This product is Greenguard Gold Certified, indicating it has been tested for over 10,000 chemical emissions and VOCs, contributing to cleaner indoor air.

3. Setup and Assembly

The NAMESAKE Tanner 3-in-1 Convertible Crib requires assembly. An assembly instruction manual is included with your product. Please follow the step-by-step diagrams and instructions carefully.

• Unpack all components and verify against the parts list provided in the assembly instructions.
• Assemble the crib on a soft, clean surface to prevent scratching.
• Ensure all hardware is tightened securely before use. Do not overtighten.
• Two adults are recommended for assembly.

4. Operating Instructions

4.1 Crib Mode: Adjustable Mattress Heights

The Tanner Crib features 4 adjustable mattress positions to adapt as your baby grows. Adjust the mattress support to the appropriate height based on your child's developmental stage.

• Highest Position: For newborns and infants who cannot push up on their hands and knees.
• Mid-High Position: For infants who can push up on their hands and knees.
• Mid-Low Position: For infants who can sit up unassisted.
• Lowest Position: For toddlers who can pull themselves to a standing position. This position helps prevent falls.

4.2 3-in-1 Convertibility

The Tanner Crib is designed to convert into a toddler bed and a daybed, extending its usability.

• Toddler Bed Conversion: To convert the crib into a toddler bed, the toddler bed conversion kit (Model #M14399) is required and sold separately. Follow the instructions provided with the conversion kit for safe assembly. This transition is typically suitable for children between 18 months and 3 years of age.
• Daybed Conversion: To convert the crib into a daybed, remove the toddler rail when your child is ready. Specific instructions for daybed conversion are included in the original assembly manual.

5. Maintenance

Proper care and maintenance will ensure the longevity and safety of your crib.

• Cleaning: Wipe the crib with a damp cloth. Avoid using abrasive cleaners or strong chemicals, as these can damage the finish or materials.
• Inspections: Periodically check all screws, bolts, and fasteners to ensure they are tight. Loose hardware can compromise the crib's stability and safety.
• Storage: If storing the crib, do so in a dry, temperature-controlled environment to prevent warping or damage to the wood.

6. Troubleshooting

If you encounter issues with your NAMESAKE Tanner Crib, consider the following:

• Wobbly Crib: Check all assembly bolts and screws. Ensure they are fully tightened. Uneven flooring can also contribute to wobbling; try moving the crib to a level surface.
• Difficulty Adjusting Mattress Height: Ensure the mattress support brackets are correctly aligned with the designated holes on the crib ends. Do not force the adjustment.
• Missing Parts: Refer to the included assembly instructions for a parts list. If parts are missing upon unboxing, contact customer support immediately.

7. Specifications

8. Warranty and Support

8.1 Warranty Information

The NAMESAKE Tanner 3-in-1 Convertible Crib includes a 1-year warranty. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the product description or the official NAMESAKE website.

8.2 Customer Support

For any questions, concerns, or assistance with your product, please contact NAMESAKE Customer Support. You can find contact information on the official NAMESAKE website or through your retailer's customer service portal.