AXESS SPBT1074 Portable Bluetooth Media Speaker User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your AXESS SPBT1074 Portable Bluetooth Media Speaker. Please read this manual thoroughly before using the device and retain it for future reference. The AXESS SPBT1074 is designed for portable audio playback, featuring Bluetooth connectivity, FM radio, USB and Micro SD card support, and an AUX input. Its built-in rechargeable battery allows for extended use in various indoor and outdoor environments.

Image 1.1: The AXESS SPBT1074 Portable Bluetooth Media Speaker in silver.

2. Safety Information

• Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
• Avoid dropping or subjecting the speaker to strong impacts.
• Do not disassemble or attempt to repair the device yourself. Refer all servicing to qualified personnel.
• Keep the speaker away from water and other liquids. This product is not waterproof.
• Use only the specified charging cable and power adapter (if applicable) to prevent damage.
• Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Dispose of the battery and device according to local regulations.

3. Package Contents

Upon unpacking, please ensure all items listed below are present and in good condition:

• AXESS SPBT1074 Portable Bluetooth Media Speaker
• USB Charge Cord
• User Manual (this document)

4. Product Overview and Controls

Familiarize yourself with the various parts and controls of your AXESS SPBT1074 speaker.

Image 4.1: Detailed view of the SPBT1074 control panel and ports.

1. DC5V Charging Port: Connect the USB charge cord here to recharge the speaker.
2. Micro SD Slot: Insert a Micro SD card for direct audio playback.
3. USB Port: Insert a USB flash drive for direct audio playback.
4. AUX Port: Connect external audio devices using a 3.5mm audio cable.
5. ON/OFF Switch: Powers the speaker on or off.
6. Mode Button (M): Switches between Bluetooth, FM Radio, USB, Micro SD, and AUX input modes.
7. Play/Pause Button (►▮▮): Plays or pauses audio playback. In FM mode, press and hold to auto-scan and save stations.
8. Rewind/Previous Track Button (◀◀): Short press for previous track/station. Long press to decrease volume.
9. Fast-Forward/Next Track Button (►►): Short press for next track/station. Long press to increase volume.

Image 4.2: Close-up of the speaker's control panel.

5. Setup

5.1. Charging the Speaker

Before initial use, fully charge the speaker for approximately 3-4 hours.

1. Connect the supplied USB charge cord to the DC5V charging port on the speaker.
2. Connect the other end of the USB charge cord to a USB power adapter (not included) or a computer's USB port.
3. The charging indicator light (if present) will illuminate during charging and turn off when fully charged.

5.2. Powering On/Off

To power on the speaker, slide the ON/OFF switch to the "ON" position. To power off, slide it to the "OFF" position.

6. Operating Instructions

6.1. Bluetooth Mode

1. Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light (if present) and an audible prompt.
2. Enable Bluetooth on your mobile device (smartphone, tablet, etc.).
3. Search for available Bluetooth devices and select "AXESS SPBT1074" from the list.
4. Once paired, the speaker will emit an audible confirmation, and the LED light will stop flashing.
5. You can now play audio from your device through the speaker. Use the speaker's controls or your device's controls to adjust volume and navigate tracks.

6.2. FM Radio Mode

1. Power on the speaker. Press the Mode (M) button repeatedly until you hear the FM radio prompt.
2. To auto-scan and save available FM stations, press and hold the Play/Pause (►▮▮) button. The speaker will scan and store stations automatically.
3. Once scanning is complete, use the Previous (◀◀) and Next (►►) buttons to navigate between saved stations.
4. Adjust volume using the long press function of the Previous (◀◀) and Next (►►) buttons.

6.3. USB / Micro SD Card Playback

1. Power on the speaker.
2. Insert a USB flash drive into the USB port or a Micro SD card into the Micro SD slot.
3. The speaker will automatically detect the storage device and begin playing audio files. If not, press the Mode (M) button to switch to the correct input.
4. Use the Play/Pause (►▮▮), Previous (◀◀), and Next (►►) buttons to control playback.

6.4. AUX Input Mode

1. Power on the speaker.
2. Connect one end of a 3.5mm audio cable (not included) to the AUX port on the speaker.
3. Connect the other end of the audio cable to the headphone jack or audio output of your external device.
4. Press the Mode (M) button repeatedly until you hear the AUX input prompt.
5. Control audio playback from your external device. Volume can be adjusted on both the speaker and the external device.

7. Maintenance

• Cleaning: Wipe the speaker's exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners or sprays.
• Storage: When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the speaker regularly, even if not in use, to maintain battery health.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Axess website. Keep your proof of purchase for warranty claims.

Axess Website: www.axessproducts.com