1. Introduction
Thank you for choosing Philips LED BR30 Dimmable Light Bulbs. These bulbs are designed to provide energy-efficient, flicker-free, soft white light for your indoor spaces. This manual provides essential information for safe installation, operation, maintenance, and troubleshooting.
Key Features:
- Energy Efficient: Uses 11 watts, equivalent to a 65-watt incandescent bulb.
- Long-Lasting: Up to 10,000 hours lifespan.
- Soft White Light: 2700 Kelvin color temperature for a warm and comfortable ambiance.
- Smooth Dimming: Flicker-free and silent dimming capability.
- EyeComfort Technology: Designed to reduce eye strain.
- Standard Base: E26 medium screw base.
2. Safety Information
Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- WARNING: Risk of electric shock. Disconnect power before installation or servicing.
- Do not use with Philips HUE products. These bulbs are for non-connected use only.
- Suitable for indoor use only.
- Do not use in totally enclosed luminaires unless the luminaire is designed for LED bulbs.
- Not for use in emergency exit fixtures or emergency lights.
- Do not disassemble the bulb. There are no user-serviceable parts inside.
- Ensure the bulb is compatible with your dimmer switch. Philips LED dimmable bulbs are tested to work with most dimmer switches.
3. Package Contents
Your package should contain the following items:
- 12 x Philips LED BR30 Dimmable Light Bulbs (Model 474312)
Image: A pack of twelve Philips BR30 LED light bulbs.
4. Setup and Installation
Follow these steps to safely install your Philips LED BR30 Dimmable Light Bulb:
- Step 1: Disconnect Power. Before replacing any light bulb, ensure the power to the fixture is turned off at the switch and, if possible, at the circuit breaker to prevent electric shock.
- Step 2: Remove Old Bulb. Allow the old bulb to cool completely before carefully unscrewing it counter-clockwise from the fixture. Dispose of the old bulb according to local regulations.
- Step 3: Install New Bulb. Carefully screw the Philips LED BR30 bulb clockwise into the E26 medium screw base until it is snug. Do not overtighten.
- Step 4: Restore Power. Once the new bulb is securely installed, restore power to the fixture at the circuit breaker and turn on the light switch.
Image: A single Philips BR30 LED light bulb, showing its shape and E26 base.
5. Operating Instructions
Standard Operation:
Once installed, the bulb will illuminate instantly when power is supplied to the fixture. These bulbs are designed for general indoor lighting in recessed can fixtures or other compatible E26 base fixtures.
Dimming Functionality:
Philips LED BR30 bulbs are dimmable and designed to work with a wide range of dimmer switches. They provide smooth, flicker-free dimming from full brightness down to a soft glow (2700K). For optimal performance, ensure your dimmer switch is compatible with LED lighting.
Image: A visual guide demonstrating how different color temperatures (Kelvin) affect room ambiance, from warm amber to cool daylight. This bulb provides 2700K soft white light.
Image: A comparison showing how a high Color Rendering Index (CRI 90) LED light accurately displays colors, illustrated with vibrant strawberries, compared to a low CRI LED.
6. Maintenance
Care and Cleaning:
- Ensure the power is off and the bulb is cool before cleaning.
- Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners.
- No other maintenance is required.
7. Troubleshooting
If you encounter issues with your Philips LED BR30 Dimmable Light Bulb, refer to the following table for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture; Bulb not screwed in properly; Bulb is faulty. | Check power supply and switch; Ensure bulb is securely screwed in; Replace bulb if necessary. |
| Bulb flickers or buzzes. | Incompatible dimmer switch; Loose connection. | Ensure dimmer is LED compatible; Tighten bulb; Consult an electrician if problem persists. |
| Bulb does not dim properly. | Incompatible dimmer switch; Dimmer range not optimized for LED. | Verify dimmer compatibility; Some dimmers have adjustment settings for LED loads. |
| Light output is too low. | Dimmer setting is too low; Incorrect bulb for application. | Adjust dimmer to maximum; Ensure bulb lumen output (650 lm) is suitable for your needs. |
8. Specifications
Detailed technical specifications for the Philips LED BR30 Dimmable Light Bulb:
Image: A Philips BR30 LED light bulb with dimensions indicated: 5.2 inches in height and 3.7 inches in width.
| Specification | Value |
|---|---|
| Model Number | 474312 |
| Bulb Type | LED |
| Bulb Shape Size | BR30 |
| Bulb Base | E26 (Medium Screw Base) |
| Wattage | 11 Watts |
| Incandescent Equivalent | 65 Watts |
| Brightness | 650 Lumens |
| Color Temperature | 2700 Kelvin (Soft White) |
| Voltage | 120 Volts |
| Average Life | 10,000 Hours |
| Dimmable | Yes |
| Indoor/Outdoor Usage | Indoor |
| Material | Plastic |
| Product Dimensions | 3.7"W x 5.2"H |
| Color Rendering Index (CRI) | 80 |
| Certification | Energy Star Certified |
9. Warranty and Support
Warranty Information:
This Philips LED BR30 Dimmable Light Bulb comes with a 3-year manufacturer warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Customer Support:
For technical assistance, warranty claims, or further information, please visit the official Philips Lighting website or contact their customer service department. Refer to the packaging for specific contact details or visit www.philips.com/lighting.
