Bullard ADH20 Miner Lamp Bracket and Cord Holder Attachment Kit

Product Overview

The Bullard ADH20 Miner Lamp Bracket and Cord Holder Attachment Kit is a replacement kit designed to securely attach a miner's lamp and manage its cord on an Advent helmet. This kit ensures the lamp is firmly in place during use and the cord is neatly organized, preventing entanglement.

Key features include:

• Durable Bracket/Cord Holder combination.
• Specifically designed for use with Bullard S51 Advent helmets.
• Black finish for discreet integration.

Figure 1: Components of the Bullard ADH20 Kit. On the left is the main bracket, a rectangular metal plate with a central, raised clip designed to hold the miner's lamp. On the right is the cord holder, a smaller metal piece with a black, flexible strap secured by a metal eyelet, used for cable management.

Setup and Installation

This kit is designed for straightforward attachment to compatible Bullard S51 Advent helmets. Ensure your helmet is clean and free of debris before installation.

1. Identify Attachment Points: Locate the designated attachment points on your Bullard S51 Advent helmet for the miner lamp bracket and cord holder. These are typically pre-drilled or molded areas.
2. Attach the Lamp Bracket: Align the main lamp bracket (the larger rectangular metal piece) with the front attachment point on the helmet. Secure it using the appropriate fasteners (not included, typically part of the helmet's design or existing hardware). Ensure the bracket is firmly seated and does not wobble.
3. Attach the Cord Holder: Position the cord holder (the smaller metal piece with the black strap) at a suitable location on the helmet, usually towards the rear or side, to manage the lamp's power cord. Secure it using the necessary fasteners. The placement should allow the cord to be routed neatly without obstructing movement or vision.
4. Verify Security: After installation, gently tug on both the lamp bracket and cord holder to confirm they are securely attached and will not detach during normal operation.

Operating Instructions

Once the ADH20 kit is installed, it provides the necessary infrastructure for your miner's lamp and its cord.

• Mounting the Lamp: Slide the miner's lamp onto the central clip of the installed lamp bracket. Ensure it clicks into place or is otherwise securely fastened according to your lamp's design.
• Managing the Cord: Route the lamp's power cord through the black strap of the cord holder. The strap is designed to hold the cord snugly, preventing it from snagging or dangling. Adjust the cord's length and position as needed for comfort and safety.
• Removal: To remove the lamp, follow the lamp manufacturer's instructions for detachment from a bracket. To remove the cord, simply unthread it from the cord holder strap.

Maintenance

Regular maintenance ensures the longevity and proper function of your ADH20 kit.

• Cleaning: Wipe the metal components with a clean, damp cloth to remove dust and dirt. Avoid abrasive cleaners or solvents that could damage the finish or material.
• Inspection: Periodically inspect the bracket and cord holder for any signs of wear, damage, or deformation. Check that all attachment points remain secure.
• Storage: If removed from the helmet, store the kit in a clean, dry place away from extreme temperatures and corrosive materials.

Troubleshooting

If you encounter issues with your ADH20 kit, consider the following:

• Kit does not fit helmet: Ensure your helmet is a Bullard S51 Advent helmet. This kit is specifically designed for that model.
• Lamp feels loose on bracket: Verify that the lamp is correctly seated and clicked into the bracket's clip. Ensure the bracket itself is securely fastened to the helmet.
• Cord is not held securely: Check that the cord is properly threaded through the black strap of the cord holder. The strap should provide sufficient tension to hold the cord.
• Visible damage: If any part of the kit is bent, cracked, or otherwise damaged, it should be replaced immediately to ensure safety and proper function.

Specifications