Lovehoney Thrust Pro Tech Automatic Pump Male Masturbator User Manual

1. Important Safety Information

Please read all instructions carefully before using the Lovehoney Thrust Pro Tech Automatic Pump. Retain this manual for future reference.

• This product is intended for adult use only.
• Do not use if you have any pre-existing medical conditions that may be aggravated by suction or physical stimulation. Consult a healthcare professional if unsure.
• Discontinue use immediately if you experience any pain, discomfort, or irritation.
• Keep out of reach of children.
• Ensure the device is fully charged before first use.
• Clean the product thoroughly before and after each use as per the cleaning instructions.
• Do not immerse the main electronic unit in water. The cylinder and sleeves are waterproof, but the motor unit is not.
• Use only water-based lubricants with this product. Oil-based lubricants may damage the material.

2. Product Overview

The Lovehoney Thrust Pro Tech Automatic Pump is designed to provide an automatic suction experience with interchangeable attachments for varied sensations.

Components:

• Main Pump Unit: Contains the motor, control buttons, and USB charging port.
• Transparent Cylinder: Clear chamber with measurement markings to observe progress.
• Interchangeable Sleeves: Includes a realistic vaginal entry sleeve and a standard ring attachment.
• USB Charging Cable: For recharging the internal battery.

Image: The Lovehoney Thrust Pro Tech Automatic Pump, showing the blue main unit, clear cylinder, and the realistic vaginal sleeve attachment.

3. Setup

3.1 Charging the Device

1. Locate the USB charging port on the main pump unit.
2. Connect the provided USB charging cable to the device and a suitable USB power source (e.g., computer, USB wall adapter).
3. The indicator light will illuminate during charging and change when fully charged (refer to product packaging for specific light behavior).
4. A full charge typically takes approximately 2-3 hours.

Image: A close-up view of the USB charging port on the Lovehoney Thrust Pro Tech pump, with the charging cable connected.

3.2 Attaching the Sleeve

1. Ensure the transparent cylinder is clean and dry.
2. Select your desired interchangeable sleeve (e.g., realistic vaginal entry or standard ring).
3. Carefully slide the chosen sleeve onto the open end of the transparent cylinder until it is securely seated. Ensure a snug fit to maintain suction.

Image: The two interchangeable attachments for the Lovehoney Thrust Pro Tech pump: a blue ring and a realistic vaginal sleeve.

4. Operating Instructions

Familiarize yourself with the control buttons on the main pump unit.

4.1 Powering On/Off

• Press and hold the power button ( ⏻ ) for a few seconds to turn the device on or off.

4.2 Using the Suction Function

1. Apply a generous amount of water-based lubricant to the opening of the sleeve and to yourself.
2. Insert yourself into the sleeve, ensuring a comfortable and secure seal.
3. Press the suction button ( ◯ ) to activate the automatic pump.
4. The device features 3 levels of suction strength. Press the suction button repeatedly to cycle through the levels (Low, Medium, High) and find your preferred intensity.
5. For optimal results, use the device for up to 30 minutes per day, with breaks of approximately 10 minutes every 10 minutes of use.
6. The transparent cylinder includes measurement markings, allowing you to track your progress over time.
7. After each session, it is recommended to moisturize to prevent dryness.

Image: The Lovehoney Thrust Pro Tech pump with the realistic sleeve attached, highlighting the three levels of suction strength.

Image: A hand holding the Lovehoney Thrust Pro Tech pump, clearly showing the transparent cylinder with its integrated measuring gauge.

5. Maintenance and Cleaning

Proper cleaning and maintenance will extend the life of your product and ensure hygienic use.

5.1 Disassembly for Cleaning

1. Ensure the device is powered off.
2. Carefully detach the transparent cylinder and sleeve from the main pump unit.

5.2 Cleaning Instructions

• Sleeves and Cylinder: Wash thoroughly with warm water and a mild toy cleaner or antibacterial soap. Rinse completely and allow to air dry. These components are waterproof.
• Main Pump Unit: Wipe the exterior of the main pump unit with a damp cloth and a mild toy cleaner or antibacterial soap. Do not submerge the main unit in water. Ensure no liquid enters the charging port or button areas.
• Avoid using harsh chemicals, alcohol-based cleaners, or abrasive materials, as these can damage the product.

5.3 Storage

• Store the product in a clean, dry, and cool place, away from direct sunlight and extreme temperatures.
• Keep the components separated or ensure they are completely dry before reassembly for storage.

6. Troubleshooting

If you encounter any issues with your Lovehoney Thrust Pro Tech Automatic Pump, please refer to the following common problems and solutions:

7. Specifications

• Brand: Lovehoney
• Model: Thrust Pro Tech
• Item Model Number: ‎Thrust Pro Tech
• Product Dimensions: ‎41 x 11 x 11 cm
• Product Weight: ‎943 g
• Battery: 1 Lithium Ion battery (included)
• Charging: USB Rechargeable
• Water Resistance: Waterproof (sleeves and cylinder only)
• Material: (Not specified in provided data, typically body-safe silicone/ABS)
• Country of Origin: China

8. Warranty and Support

Lovehoney products are manufactured to high-quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the official Lovehoney website or contact their customer service directly.

Please retain your proof of purchase for any warranty claims.

Manufacturer: Lovehoney

Website: www.lovehoney.ca (or relevant regional site)