Gardena 03115-20 combisystem Fruit Picker Instruction Manual

1. Introduction

The GARDENA combisystem Fruit Picker is designed for conveniently picking fruit directly from trees. Its innovative design includes small tines between the plastic prongs, facilitating the easy collection of various fruit sizes. All picked fruit is securely collected in the integrated sturdy catcher bag, ensuring visibility and preventing damage. The ergonomic grip allows for comfortable harvesting from shorter trees or low-hanging branches even without an extended handle. For reaching higher areas, the operating angle can be individually adjusted using the quick-lock lever. This Fruit Picker is fully compatible with all GARDENA combisystem handles, with telescopic handles recommended for reaching heights of approximately 5 meters.

Image 1.1: The Gardena combisystem Fruit Picker, showing the picking head, adjustable handle, and catcher bag.

2. Safety Information

WARNING: Avoid contact with sharp edges. Use the tool only as intended and wear appropriate protection, such as gloves and eye protection, especially when working at height or near thorny branches. Ensure stable footing when using the fruit picker with an extended handle. Do not use the tool for purposes other than fruit picking.

3. Package Contents

The Gardena 03115-20 combisystem Fruit Picker package typically includes:

• 1 x Gardena combisystem Fruit Picker head with integrated catcher bag
• 1 x Short handle grip (attached to the picker head)

Note: combisystem handles (e.g., telescopic handles) are sold separately and are required for extended reach.

4. Setup and Assembly

The Gardena combisystem Fruit Picker is designed for quick and easy attachment to any Gardena combisystem handle.

1. Attaching a combisystem Handle: If using an extended handle, align the fruit picker's short handle grip with the combisystem handle. Push the handle firmly into the connection point until it clicks securely into place. Ensure the connection is stable before use.
2. Adjusting the Operating Angle: Locate the quick-lock lever on the fruit picker head. Loosen the lever to adjust the angle of the picking head relative to the handle. Set the desired angle for optimal reach and comfort, then tighten the lever firmly to secure the position.

Image 4.1: A user demonstrating how to hold the fruit picker, illustrating the handle and adjustment mechanism.

5. Operating Instructions

Follow these steps for effective fruit picking:

1. Positioning: Extend the combisystem handle to the appropriate length for the desired fruit. Adjust the operating angle of the fruit picker head as needed using the quick-lock lever (refer to Section 4).
2. Picking Fruit: Carefully guide the fruit picker head around the fruit you wish to pick. Position the fruit between the plastic prongs. The small tines are designed to gently detach the fruit from the branch.
3. Collecting Fruit: Once detached, the fruit will fall into the sturdy catcher bag attached beneath the picking head. The bag is designed to hold multiple fruits, preventing them from falling to the ground and bruising.
4. Emptying the Bag: Periodically lower the fruit picker and empty the contents of the catcher bag into a basket or container.

Image 5.1: A user demonstrating the fruit picker in action, collecting apples from a tree.

Image 5.2: A close-up view of the fruit picker head engaging with a fruit on a branch, illustrating the tines and catcher bag.

6. Maintenance and Care

Proper maintenance ensures the longevity and optimal performance of your fruit picker.

• Cleaning: After each use, especially when picking sticky or juicy fruits, rinse the plastic prongs and the catcher bag with water. Allow the bag to air dry completely before storage to prevent mold or mildew.
• Storage: Store the fruit picker in a clean, dry place, away from direct sunlight and extreme temperatures. If using a combisystem handle, detach the fruit picker head for compact storage if desired.
• Inspection: Periodically inspect the plastic prongs, catcher bag, and quick-lock lever for any signs of wear or damage. Replace any damaged components if necessary.

7. Troubleshooting

Here are solutions to common issues you might encounter:

• Fruit not detaching easily:
  • Ensure the fruit is fully ripe.
  • Position the fruit deeper within the prongs, allowing the tines to engage properly with the stem.
  • Gently twist or pull the picker to aid detachment.
• Fruit falling out of the bag:
  • Check if the catcher bag is securely attached and free from holes or tears.
  • Avoid overfilling the bag; empty it regularly.
• Handle attachment feels loose:
  • Ensure the combisystem handle is fully inserted and clicked into place.
  • Verify that the quick-lock lever for angle adjustment is tightened securely.

8. Specifications

9. Warranty and Support

Warranty: The Gardena combisystem Fruit Picker comes with a 25-year warranty, reflecting Gardena's commitment to quality and durability. Please retain your proof of purchase for warranty claims.

Customer Support: For technical assistance, spare parts, or warranty inquiries, please contact Gardena customer service. Refer to the official Gardena website or product packaging for the most current contact information in your region.

Online Resources: Additional information, tips, and product videos may be available on the official Gardena website.