Horizont 14495C Farmer 7 LED Fence Tester User Manual

Introduction

The Horizont 14495C Farmer 7 LED Fence Tester is a reliable and easy-to-use device designed to quickly and accurately measure the voltage of electric fences. Its compact design, clear LED indicators, and robust construction make it an essential tool for maintaining effective electric fencing systems for livestock and property protection. This manual provides detailed instructions for the safe and efficient operation of your fence tester.

Safety Information

• Always handle electric fences with caution. Even low voltage can cause discomfort.
• Do not use the tester if it appears damaged.
• Ensure your hands are dry when operating the device.
• Keep the device away from children.
• Do not attempt to open or repair the device yourself. Refer to qualified personnel for service.
• Dispose of batteries responsibly according to local regulations.

Package Contents

• Horizont 14495C Farmer 7 LED Fence Tester
• 1 x 9V Battery (pre-installed or included separately)
• User Manual (this document)

Product Overview

Figure 1: Horizont 14495C Farmer 7 LED Fence Tester

This image displays the Horizont 14495C Farmer 7 LED Fence Tester. The device is primarily black and white, with a prominent display area. At the top, the "★★ farmer" logo is visible. Below it, a lightning bolt symbol indicates its function. A vertical column of seven LEDs (green and red) indicates voltage levels, ranging from 1,000V to 10,000V. A red LED and a battery icon indicate battery status. The "horizont" brand logo is located near the bottom, above the text "Fence Voltmeter 7 LED" and "Art.-Nr. 14495C". The device features a non-slip insulated stake for safe operation and a cable that can be wrapped around the tester for storage.

Components:

1. Voltage Indicator LEDs: Seven LEDs (green for good voltage, red for low voltage) indicating voltage levels from 1,000V to 10,000V.
2. Battery Status Indicator: A red LED and battery icon to show battery condition.
3. Ground Stake: Insulated stake for safe grounding during measurement.
4. Fence Hook/Cable Winder: For attaching to the fence and wrapping the cable for storage.

Setup

Battery Installation:

The Horizont 14495C Farmer 7 LED Fence Tester comes with a 9V battery included, which may be pre-installed. If not, locate the battery compartment (usually on the back or side of the device), open it, insert the 9V battery ensuring correct polarity (+/-), and close the compartment securely.

Operating Instructions

The device automatically activates when connected to a fence voltage.

1. Prepare the Tester: Unwind the cable from the tester if it's wrapped for storage.
2. Ground the Tester: Insert the non-slip insulated stake firmly into the ground. Ensure good contact with the soil for accurate readings.
3. Connect to Fence: Hook the metal contact point of the tester onto the electric fence wire.
4. Read Voltage: The device will automatically turn on and display the fence voltage using the 7 LED indicators.
   • Each illuminated LED corresponds to a specific voltage level (e.g., 1,000V, 2,000V, up to 10,000V).
   • Green LEDs indicate sufficient voltage.
   • A red LED at the bottom (1,000V) or the battery indicator turning red suggests low voltage or a low battery.
5. Disconnect: Once the reading is taken, remove the tester from the fence and then from the ground.
6. Storage: Wrap the cable around the tester for easy storage and to protect it from damage.

Note: The device is designed for easy handling and provides additional protection against damage due to its robust design and cable management feature.

Maintenance

• Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the tester in a dry place, away from direct sunlight and extreme temperatures. Ensure the cable is neatly wrapped to prevent tangling or damage.
• Battery Replacement: If the battery indicator shows low power, replace the 9V battery promptly to ensure accurate readings.
• Inspection: Periodically inspect the cable, stake, and housing for any signs of wear or damage. Do not use if damaged.

Troubleshooting

Specifications

• Model: 14495C (also referred to as 14496C in some specifications)
• Brand: Horizont
• Voltage Range: 1,000V to 10,000V (indicated by 7 LEDs)
• Power Source: 1 x 9V battery (included)
• Dimensions: Approximately 19 x 14 x 7 cm (7.5 x 5.5 x 2.8 inches)
• Weight: Approximately 160 grams (0.35 lbs)
• Features: Automatic activation, non-slip insulated stake, cable winding for storage.

Warranty and Support

Horizont products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official Horizont website. For technical support, troubleshooting assistance, or spare parts, please contact Horizont customer service through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.

Horizont Official Website: www.horizont.com