1. Introduction
Thank you for purchasing the HOMCOM Modern Floor Lamp. This lamp features an elegant design with a white fabric shade, a stable stainless steel base, and a convenient foot switch for easy operation. It is designed to provide a soft, ambient light, creating a warm and inviting atmosphere in your living room, bedroom, or office. This manual provides important information regarding the safe assembly, operation, and maintenance of your new floor lamp. Please read it thoroughly before use and retain it for future reference.

Image: The fully assembled HOMCOM Modern Floor Lamp, showcasing its sleek design and soft illumination in a living room environment.
2. Safety Instructions
To ensure safe operation and prevent damage, please observe the following safety precautions:
- Always disconnect the power supply before cleaning, replacing the bulb, or performing any maintenance.
- This lamp is intended for indoor use only. Do not expose it to moisture or extreme temperatures.
- Ensure the lamp is placed on a stable, level surface to prevent tipping.
- Do not exceed the maximum wattage specified for the light bulb (40W).
- Keep the power cord away from heat sources, sharp edges, and heavy objects.
- Do not operate the lamp with a damaged cord or plug. Contact qualified personnel for repair.
- Keep out of reach of children and pets.
- Use only E27 base bulbs.
3. Package Contents
Please check that all components are present and undamaged before assembly:
- Fabric Lampshade (1)
- Lamp Pole with E27 Socket (1)
- Stainless Steel Base (1)
- Power Cable with Foot Switch (1)
- Assembly Hardware (screws, washers, etc.)

Image: All individual components of the lamp laid out, including the base, lamp pole with socket, and power cable with foot switch.
4. Setup and Assembly
Follow these steps to assemble your HOMCOM Floor Lamp:
- Step 1: Attach the Lamp Pole to the Base.
Carefully align the bottom end of the lamp pole with the opening in the stainless steel base. Secure it using the provided screws and washers. Ensure it is tightened firmly for stability.
Image: A detailed view of the lamp's stable stainless steel base and its connection point to the lamp pole.
- Step 2: Install the Light Bulb(s).
Insert one or two E27 base light bulbs (not included) into the lamp sockets at the top of the pole. Twist clockwise until secure. Do not exceed the maximum wattage of 40W per bulb.
Image: A close-up of the E27 bulb socket located at the top of the lamp pole, ready for bulb installation.
- Step 3: Place the Fabric Lampshade.
Gently slide the white fabric lampshade over the lamp pole, ensuring it sits evenly and securely on the designated supports. Adjust as needed to ensure a straight and aesthetically pleasing appearance.
Image: A detailed view of the white pleated fabric lampshade, designed to diffuse light for a warm ambiance.
- Step 4: Position and Connect to Power.
Place the assembled lamp in your desired location, ensuring the power cable can reach an electrical outlet without being strained or obstructed. Plug the power cable into a suitable 240V electrical outlet.
5. Operating Instructions
Your HOMCOM Floor Lamp is designed for simple operation:
- Turning On/Off: The lamp is equipped with a convenient foot switch located on the power cable. Gently press the switch with your foot to turn the lamp ON or OFF.
- Bulb Replacement: Always unplug the lamp before replacing bulbs. Allow bulbs to cool completely before touching. Unscrew the old bulb counter-clockwise and screw in a new E27 base bulb clockwise. Ensure the new bulb does not exceed 40W.

Image: The power cable featuring the integrated foot switch, allowing for easy control of the lamp.
6. Maintenance
Regular cleaning and care will help maintain the appearance and functionality of your lamp:
- Cleaning the Lampshade: The fabric lampshade can be gently wiped with a soft, dry cloth to remove dust. For more stubborn marks, a slightly damp cloth can be used, but ensure the shade is completely dry before reconnecting power.
- Cleaning the Base and Pole: Wipe the stainless steel base and metal pole with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- General Care: Periodically check the power cord and plug for any signs of damage. Ensure all connections remain secure.
7. Troubleshooting
If you encounter any issues with your lamp, please refer to the following common problems and solutions:
- Lamp does not turn on:
- Check if the power plug is securely inserted into the electrical outlet.
- Verify that the light bulb(s) are correctly installed and not burnt out. Replace if necessary.
- Ensure the foot switch is pressed to the 'ON' position.
- Check the circuit breaker or fuse box for your electrical outlet.
- Lamp is unstable or wobbles:
- Ensure the lamp is placed on a flat, level surface.
- Check that the lamp pole is securely fastened to the base. Tighten any loose screws.
- Light is too dim or flickers:
- Ensure the correct wattage bulb (up to 40W) is used.
- Try replacing the bulb with a new one.
8. Specifications
| Brand | HOMCOM |
| Model Number | B31-0190531 |
| Overall Dimensions (L x W x H) | 14 cm x 14 cm x 120 cm |
| Weight | 2 Kilograms |
| Material (Base/Pole) | Metal / Stainless Steel |
| Material (Lampshade) | Polyester Fabric |
| Color | White |
| Bulb Base Type | E27 |
| Max Wattage | 40 Watts |
| Voltage | 240 Volts |
| Switch Type | Foot Switch |
| Power Cable Length | 1.6 meters |

Image: A diagram illustrating the overall dimensions of the floor lamp: 14 cm (width) x 14 cm (depth) x 120 cm (height).
9. Warranty and Support
For warranty information or technical support, please refer to the retailer where you purchased this product or visit the official HOMCOM website. Please have your model number (B31-0190531) and purchase date available when contacting support.