Jensen Compact Bluetooth AM/FM Dual Alarm Clock Radio User Manual

1. Introduction

1.1 Product Overview

The Jensen Compact Bluetooth AM/FM Dual Alarm Clock Radio is designed to provide convenient timekeeping, alarm functions, and audio entertainment. It features a large, easy-to-read backlit LCD display, a digital AM/FM radio tuner, dual alarms, and Bluetooth connectivity for wireless audio streaming.

1.2 Key Features

• Large Backlit LCD Display: Clearly view the time with bright green jumbo LEDs.
• AM/FM Tuner: Built-in digital tuner with 15 station preset memory for radio, talk, and music programming.
• Bluetooth Connectivity: Stream audio wirelessly from compatible devices.
• Dual Alarms: Set two separate wake times with adjustable alarm tones and snooze duration.
• Auxiliary Input: Connect external audio devices via a 3.5mm Aux-in socket.
• Battery Backup: Maintains time and alarm settings during power outages.
• Snooze & Sleep Timer: Allows for extended sleep or falling asleep to radio programming.

2. Important Safety Instructions

• Read all instructions before operating the device.
• Do not use this apparatus near water or moisture.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way.

3. Controls and Display

Familiarize yourself with the various controls and indicators on your Jensen Alarm Clock Radio.

Front view of the Jensen Compact Bluetooth AM/FM Dual Alarm Clock Radio, showcasing the large green LED display and the arrangement of control buttons on the front and top panels.

3.1 Front Panel

• LCD Display: Shows time, alarm status, radio frequency, and mode indicators.

3.2 Top Panel Controls (Typical)

• POWER/MODE Button: Turns the unit on/off and switches between modes (FM/AM/Bluetooth/AUX).
• TIME SET Button: Used to set the current time.
• ALARM 1/2 SET Buttons: Used to set Alarm 1 and Alarm 2.
• SNOOZE/SLEEP Button: Activates snooze during an alarm or sets the sleep timer.
• VOLUME +/- Buttons: Adjusts the audio volume.
• TUNE +/- / PRESET +/- Buttons: Tunes radio frequency or navigates through preset stations.
• PLAY/PAUSE/PAIR Button: Controls playback in Bluetooth mode, initiates Bluetooth pairing.

3.3 Rear Panel (Typical)

• FM Antenna: Extendable wire antenna for FM reception.
• AUX IN Jack: 3.5mm input for external audio devices.
• DC IN Jack: For connecting the AC power adapter.
• Battery Compartment: For battery backup (batteries not included).

4. Setup

4.1 Power Connection

1. Insert 2 x 'AAA' batteries (not included) into the battery compartment on the rear of the unit. These batteries provide backup power to maintain time and alarm settings during a power outage.
2. Plug the AC power adapter into the DC IN jack on the rear of the unit, then plug the adapter into a standard AC wall outlet. The unit will power on.

4.2 Setting the Time

1. In standby mode (unit off, time displayed), press and hold the TIME SET button. The hour digits will begin to flash.
2. Press the TUNE +/- buttons to adjust the hour. Pay attention to the PM indicator on the display.
3. Press the TIME SET button again. The minute digits will flash.
4. Press the TUNE +/- buttons to adjust the minutes.
5. Press the TIME SET button once more to confirm and exit time setting mode.

5. Operating Instructions

5.1 Setting Alarms (Alarm 1 and Alarm 2)

1. In standby mode, press and hold the ALARM 1 SET button. The Alarm 1 hour digits will flash.
2. Press the TUNE +/- buttons to adjust the alarm hour.
3. Press the ALARM 1 SET button again. The Alarm 1 minute digits will flash.
4. Press the TUNE +/- buttons to adjust the alarm minutes.
5. Press the ALARM 1 SET button again to select the alarm source (Buzzer or Radio).
6. Press the ALARM 1 SET button once more to confirm and activate Alarm 1. An alarm icon will appear on the display.
7. Repeat steps 1-6 for ALARM 2 SET to set the second alarm.
8. To disable an alarm, press the corresponding ALARM SET button repeatedly until the alarm icon disappears from the display.

5.2 AM/FM Radio Operation

1. Press the POWER/MODE button to turn on the unit. Press it repeatedly to select FM or AM mode.
2. Extend the FM wire antenna fully for best FM reception. For AM, rotate the unit for best reception.
3. Manual Tuning: Press the TUNE +/- buttons briefly to adjust the frequency step by step.
4. Auto Scan: Press and hold the TUNE +/- buttons to automatically scan for the next available station.
5. Setting Presets: Tune to your desired station. Press and hold the PRESET button (often combined with TUNE +/-). Use TUNE +/- to select a preset number (P01-P15), then press PRESET again to save.
6. Recalling Presets: In radio mode, briefly press the PRESET button to cycle through saved stations.

5.3 Bluetooth Pairing

1. Press the POWER/MODE button repeatedly until 'BT' or 'Bluetooth' appears on the display. The unit will enter pairing mode, indicated by a flashing Bluetooth icon.
2. Enable Bluetooth on your mobile device (smartphone, tablet, etc.) and search for available devices.
3. Select 'JENSEN' from the list of devices. If prompted for a password, enter '0000'.
4. Once paired, the Bluetooth icon will stop flashing and remain solid. You can now stream audio from your device to the clock radio.
5. Use the PLAY/PAUSE button on the unit or your device to control playback.

5.4 Auxiliary Input

1. Connect one end of a 3.5mm audio cable (not included) to the AUX IN jack on the rear of the unit.
2. Connect the other end of the cable to the headphone jack or line-out jack of your external audio device (e.g., MP3 player, CD player).
3. Press the POWER/MODE button repeatedly until 'AUX' appears on the display.
4. Start playback on your external device. Adjust the volume using the VOLUME +/- buttons on the clock radio or your external device.

5.5 Snooze and Sleep Timer

• Snooze: When an alarm sounds, press the SNOOZE button to temporarily silence the alarm for approximately 9 minutes. The alarm will sound again after the snooze period.
• Sleep Timer: While the unit is playing (radio or AUX), press the SLEEP button (often combined with SNOOZE) repeatedly to cycle through sleep timer options (e.g., 90, 60, 30, 15 minutes, OFF). The unit will automatically turn off after the selected time.

6. Maintenance

6.1 Cleaning

• Always unplug the unit from the power outlet before cleaning.
• Use a soft, dry cloth to clean the exterior surfaces.
• Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.

6.2 Battery Replacement

• If the battery backup is not functioning, replace the 'AAA' batteries in the compartment on the rear of the unit.
• Ensure correct polarity when inserting new batteries.

7. Troubleshooting Guide

8. Product Specifications

• Brand: Jensen
• Display Type: Digital, Backlit LCD
• Connectivity: Bluetooth, AUX (3.5mm)
• Radio Tuner: AM/FM Digital
• Power Source: AC Power Adapter, Battery Backup (2 x 'AAA' batteries, not included)
• Special Features: Dual Alarms, Snooze, Sleep Timer, Large Display
• Manufacturer: Jensen
• UPC: 712190152628
• ASIN: B076PNNJ8S

9. Warranty and Customer Support

For warranty information, technical support, or service inquiries, please refer to the official Jensen website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty claims.

Website: www.jensen.com (Note: This is a placeholder URL. Please refer to your product packaging or official documentation for the correct support website.)