Yaheetech Drawing Table

Introduction

Thank you for choosing the Yaheetech Drawing Table Model ABCD. This manual provides essential information for the safe assembly, operation, and maintenance of your new drafting table. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

This versatile drawing table is designed to support various activities, from art and craft projects to studying and office tasks, offering adjustable features and integrated storage solutions.

Safety Information

• Caution: Do not exceed the maximum table load capacity of 100kg (220.5lb). Overloading can cause instability and damage.
• This product is certified by EPA, ensuring no harmful formaldehyde emissions.
• Ensure all screws and fasteners are securely tightened before use. Periodically check for loose connections.
• Keep small parts away from children during assembly to prevent choking hazards.
• Assemble the table on a soft, clean surface to prevent scratches to the product and your floor.
• When adjusting the tabletop angle or table height, ensure no objects or body parts are in the way to prevent pinching.

Parts List

Before assembly, verify that all components are present and undamaged. Refer to the included hardware pack and diagrams for specific part identification.

• Main Tabletop (Tiltable Section)
• Retractable Side Tabletop
• Table Frame (Legs and Support Bars)
• Stool (Seat and Legs)
• Fabric Drawers (2 units)
• Side Tray with Pen/Brush Holders and Storage Slots
• Metal Shelf (underneath tabletop)
• Assembly Hardware (screws, bolts, nuts, wrench, screwdriver)

Figure 1: Key components and features including the retractable desktop and anti-skid base.

Setup and Assembly

Assembly typically requires one person, but having a second person can be helpful, especially when positioning the main tabletop. A screwdriver is required for some steps.

1. Assemble the Frame: Connect the leg components using the provided hardware. Do not fully tighten screws until the entire frame is assembled to allow for minor adjustments.
2. Attach the Main Tabletop: Carefully place the main tabletop onto the assembled frame. Secure it with the designated screws. Ensure the tilt mechanism is correctly aligned.
3. Install the Retractable Side Tabletop: Slide the retractable tabletop into its designated slot on the side of the main tabletop. Ensure it moves smoothly.
4. Attach the Side Tray: Secure the side tray with pen/brush holders and storage slots to the side of the main tabletop.
5. Insert Fabric Drawers: Place the two nonwoven fabric drawers into their compartments beneath the main tabletop.
6. Assemble the Stool: Connect the stool legs and seat using the provided hardware. Ensure all connections are stable.
7. Final Tightening: Once all components are in place and aligned, fully tighten all screws and fasteners on both the table and the stool.

Figure 2: Overview of the assembled table, highlighting the integrated pen holder and adjustable lift mechanism.

Operating Instructions

Adjusting Tabletop Angle

The main tabletop can be tilted from 0° (flat) to 60° to suit various tasks such as drawing, drafting, or reading. To adjust the angle:

1. Lift the front edge of the main tabletop.
2. Engage the support bar into the desired notch on the adjustment mechanism.
3. Gently lower the tabletop until it rests securely on the support bar.

Figure 3: The tabletop can be adjusted to various angles up to 60 degrees for comfortable working positions.

Adjusting Table Height

The table's height can be adjusted to accommodate different users and preferences. To adjust the height:

1. Loosen the adjustment knobs on the table legs.
2. Carefully raise or lower the tabletop to the desired height.
3. Tighten the adjustment knobs firmly to secure the table at the new height.

Figure 4: The table's height can be adjusted from 27.5 inches to 36.5 inches.

Utilizing Storage Features

• Retractable Board: Pull out the side board for additional workspace or to hold documents and reference materials.
• Side Tray: Use the integrated slots and cup holders on the side tray to organize pens, brushes, erasers, and other small stationery items.
• Fabric Drawers: The two nonwoven fabric drawers provide convenient storage for larger items like notebooks, tablets, or art supplies.
• Metal Shelf: The perforated metal shelf beneath the tabletop offers additional storage for paint cans, drawing drafts, or other supplies.

Figure 5: The table in use, demonstrating the side tray and drawers for organized storage.

Product Video Overview

Maintenance

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish. The tabletop is designed to be easy to clean.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain stability.
• Fabric Drawers: The nonwoven fabric drawers can be spot cleaned with a mild detergent if needed. Allow them to air dry completely.

Troubleshooting

• Table Wobbles: Ensure all assembly screws are fully tightened. Check that the table is placed on a level surface. Adjust the foot pads if necessary to stabilize.
• Tabletop Adjustment Difficulty: Verify that the support bar is correctly seated in the notches. Ensure no obstructions are preventing smooth movement.
• Retractable Board Sticks: Apply a small amount of silicone lubricant to the sliding mechanism if the board becomes difficult to pull out or push in.
• Stool Instability: Check that all stool leg connections are securely tightened. Ensure the stool is on a flat surface.

Specifications

Figure 6: Detailed dimensions of the drawing table and accompanying stool.

Warranty and Support

For warranty information, product support, or to inquire about replacement parts, please contact Yaheetech customer service directly. Refer to your purchase documentation or the Yaheetech official website for contact details.

Please have your model number (ABCD) and purchase date available when contacting support.