1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Aspira KALIECO AP9291 Automatic Electric Hot Air Hand Dryer. Please read these instructions thoroughly before installation and use, and retain them for future reference.
Figure 1: Aspira KALIECO AP9291 Automatic Electric Hot Air Hand Dryer, front view. The unit is white with a sleek, curved design, featuring the 'kalieco' logo in blue on the lower front panel. It is designed for wall mounting.
2. Safety Instructions
To prevent injury or damage, always observe the following safety precautions:
- Electrical Safety: This appliance must be installed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply matches the specifications on the product label.
- Water and Moisture: Do not install the hand dryer where it may be directly exposed to water spray or excessive moisture.
- Ventilation: Ensure adequate ventilation around the unit. Do not block air inlets or outlets.
- Maintenance: Disconnect power before performing any maintenance or cleaning. Only use recommended cleaning agents.
- Children: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Damage: Do not operate the hand dryer if it is damaged or malfunctioning. Contact qualified service personnel for repairs.
3. Package Contents
Verify that all components are present before installation:
- Aspira KALIECO AP9291 Hand Dryer Unit
- Mounting Hardware (screws, wall anchors)
- Instruction Manual (this document)
4. Product Features
The Aspira KALIECO AP9291 Hand Dryer is designed for efficiency and durability:
- Automatic Operation: Equipped with a photocell sensor for touch-free activation.
- High Power Motor: Ensures a constant flow of hot air for quick drying.
- Durable Construction: Features an ABS cover, which is thermo-resistant and anti-shock.
- Secure Casing: Cover locking system with screws for enhanced security.
- Self-Extinguishing Support: Internal support made from self-extinguishing ABS material for added safety.
5. Setup and Installation
Installation of this electrical appliance should only be performed by a qualified professional.
- Choose Location: Select a suitable wall location, ensuring sufficient space around the unit for air circulation and user access. Avoid areas directly above sinks or where water might splash.
- Mark Mounting Points: Use the provided template (if applicable) or measure and mark the drilling points for the mounting screws on the wall.
- Drill Holes: Drill holes at the marked points and insert wall anchors suitable for your wall type.
- Wiring: Disconnect power at the main circuit breaker. Connect the hand dryer's electrical wiring to the building's power supply according to local electrical codes. Ensure proper grounding.
- Mount Unit: Securely attach the hand dryer to the wall using the mounting screws.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
6. Operating Instructions
The Aspira KALIECO AP9291 Hand Dryer operates automatically:
- Activation: Place your hands under the air outlet. The integrated photocell sensor will detect your hands and automatically activate the hot air flow.
- Drying: Rub your hands together under the hot air stream until dry. The drying process typically takes approximately 35 seconds.
- Deactivation: Remove your hands from under the air outlet. The hand dryer will automatically turn off after a short delay.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your hand dryer:
- Cleaning the Exterior: Disconnect power before cleaning. Wipe the exterior surface with a soft, damp cloth and a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive materials that could damage the ABS cover.
- Air Inlet/Outlet: Periodically check and clean the air inlet and outlet grilles to ensure they are free from dust and debris. Blockages can reduce efficiency and potentially cause overheating.
- Filter (if applicable): If your model includes an air filter, refer to specific instructions for cleaning or replacement. (Note: This model description does not explicitly mention a filter, so this is a general point).
- Inspection: Regularly inspect the power cord and casing for any signs of damage. If damage is found, disconnect power and contact a qualified technician.
8. Troubleshooting
If you encounter issues with your hand dryer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hand dryer does not activate. | No power supply. Sensor blocked or dirty. Hands not positioned correctly. | Check circuit breaker. Clean sensor lens. Ensure hands are directly under the sensor. |
| Air flow is weak or cold. | Air inlets/outlets blocked. Heating element malfunction. | Clean air grilles. Contact qualified service personnel. |
| Hand dryer runs continuously. | Sensor malfunction. Obstruction near sensor. | Remove any obstructions. Disconnect power and contact service personnel. |
If the problem persists after attempting these solutions, disconnect power and contact a qualified service technician.
9. Specifications
| Model | AP9291 |
| Brand | Aspira |
| Operation | Photocell (Automatic) |
| Power | 2100 W |
| Air Volume | 170 m³/h |
| Cover Material | ABS (Thermo-resistant, Anti-shock) |
| Internal Support | Self-extinguishing ABS |
| Batteries Required | No |
10. Warranty and Support
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your Aspira dealer. Keep your proof of purchase for warranty claims.
