Bruder 03581

Bruder 03581 Scania R-Series UPS Logistics Truck with Forklift Vehicles Instruction Manual

1. Product Overview

The Bruder 03581 Scania R-Series UPS Logistics Truck with Forklift Vehicles is a detailed replica designed for realistic play. This model features a Scania R-Series truck with an interchangeable container unit and a mobile forklift. The truck's cab includes opening doors and folding outside mirrors. The container unit can be automatically released from the vehicle, allowing the truck to move independently. The forklift is designed to mount at the back of the container for transport and features a two-part lifting mast with a cable deflector and tilt function for handling pallets.

Bruder 03581 Scania R-Series UPS Logistics Truck with Forklift Vehicles

Image 1.1: The complete Bruder 03581 Scania R-Series UPS Logistics Truck with Forklift Vehicles set.

2. What's in the Box

  • Scania R-Series UPS logistics truck with cab and interchangeable container unit.
  • Mobile forklift.
  • Pallets (accessories for forklift operation).

3. Safety Information

WARNING: Small Parts - Not for Children under 3 years old. Adult supervision is recommended during play.

4. Setup

4.1 Attaching the Forklift to the Truck

The mobile forklift is designed to be transported by the truck. Locate the mounting points at the rear of the container unit. Align the forklift with these points and secure it firmly. Ensure the forklift is stable before moving the truck.

Forklift attached to the rear of the UPS truck

Image 4.1: The mobile forklift securely attached to the rear of the UPS truck's container.

4.2 Preparing the Container Unit

The container unit is interchangeable. To prepare it for independent use or loading, ensure it is securely attached to the truck chassis. The container can be detached by pulling a release mechanism and swinging down the outriggers to support it.

5. Operating Instructions

5.1 Scania R-Series Truck Operation

  • Cab Access: The truck's cab doors can be opened to place figures inside. The outside mirrors are foldable.
  • Engine Access: The hood of the truck can be opened to reveal a detailed engine compartment.
  • Container Detachment: To detach the container, locate the release mechanism (often a lever or switch) on the chassis. Activate it and carefully swing down the support outriggers located beneath the container. Once the outriggers are stable, the truck can drive away, leaving the container freestanding.
UPS truck with container detached and supported by outriggers

Image 5.1: The container unit detached from the truck chassis, supported by its outriggers.

5.2 Mobile Forklift Operation

  • Fork Adjustment: The forklift features a two-part lifting mast. Use the control knob or lever (if present) to raise and lower the forks. The forks can also be adjusted for width to accommodate different pallet sizes.
  • Pallet Handling: Carefully slide the forks under a pallet. Use the lifting mast to raise the pallet. The tilt function allows for slight angle adjustments to secure the load.
  • Loading/Unloading Container: Position the forklift in front of the container's open rear doors. Use the lifting and tilting functions to place or retrieve pallets from inside the container.
Forklift loading pallets into the open rear of the UPS container

Image 5.2: The mobile forklift in action, loading pallets into the container.

5.3 Official Product Videos

Video 5.3.1: Official Bruder Toys video demonstrating the UPS Container Truck with Forklift.

Video 5.3.2: Official Bruder Toys video showcasing the Linde HTI60 Fork Lift, demonstrating similar forklift functionalities.

6. Maintenance

To ensure the longevity of your Bruder toy, regularly clean it with a damp cloth. Avoid using harsh chemicals or abrasive materials. Store the toy in a dry, clean environment away from direct sunlight to prevent material degradation.

7. Troubleshooting

If any parts become detached during play, carefully reattach them. Bruder toys are designed with durable, snap-together components. For persistent issues or missing parts, refer to the warranty and support section.

8. Specifications

  • Product Dimensions: 27.36 x 7.28 x 10.43 inches
  • Item Weight: 5.37 pounds
  • Item Model Number: 03581
  • Manufacturer Recommended Age: 4 - 15 years
  • Release Date: April 1, 2018
  • Manufacturer: Bruder Toys

9. Warranty and Support

For warranty information, replacement parts, or further support, please contact Bruder Toys directly through their official website or customer service channels. Keep your purchase receipt as proof of purchase.

© 2024 Bruder Toys. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.