deleyCON RJ45 Keystone Wall Outlet Installation Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your deleyCON RJ45 Keystone Wall Outlet. This product is designed for high-speed network connections, supporting 10 Gigabit Ethernet (10/100/1000/10000 Mbit/s) with a transmission bandwidth of up to 500 MHz. It is compatible with Cat5, Cat5e, Cat6, and Cat6a cables, offering a fully shielded solution for reliable data transmission.

2. Safety Instructions

• Ensure power is disconnected from the installation area before beginning any wiring work.
• Only use appropriate tools for installation.
• Do not expose the product to moisture or extreme temperatures.
• If you are unsure about any installation steps, consult a qualified electrician or network technician.
• Keep out of reach of children.

3. Package Contents

Please verify that all items are present in your package:

• 1x deleyCON RJ45 Wall Outlet Housing (White)
• 2x deleyCON Cat6a Fully Shielded Keystone Modules
• Mounting Screws
• Cable Ties

Image 3.1: Contents of the deleyCON RJ45 Keystone Wall Outlet package, showing the white wall plate, two metallic keystone jacks, mounting screws, and cable ties.

4. Setup and Installation

Follow these steps to install your deleyCON RJ45 Keystone Wall Outlet:

4.1 Prepare the Wall Outlet

1. Ensure the electrical power to the installation area is turned off.
2. Carefully remove the outer cover of the wall outlet housing if it is pre-assembled.
3. Mount the metal frame of the wall outlet to the flush-mounted box in your wall using the provided screws.

Image 4.1: Rear view of the deleyCON wall outlet housing, showing the metal mounting frame designed for flush-mounted installation.

4.2 Wire the Keystone Modules

The Keystone modules feature tool-free assembly for solid conductors (AWG 22-25).

1. Open the keystone module by lifting the cover.
2. Refer to the color coding diagram (EIA/TIA568A or EIA/TIA568B) printed on the module. Choose the standard appropriate for your network.
3. Strip approximately 2-3 cm of the outer jacket from your network cable. Do not strip the individual wire insulation.
4. Untwist the wire pairs and carefully place each individual wire into its corresponding color-coded slot on the IDC terminal block. Ensure the wires are fully seated.
5. Close the cover of the keystone module firmly. This action will simultaneously cut the excess wire and establish the connection.
6. Repeat for the second keystone module.

Image 4.2: Close-up of a deleyCON Cat6a Keystone module, illustrating the IDC terminal block with color-coded slots for EIA/TIA568A and B wiring standards.

4.3 Install Keystone Modules into Housing

1. Once wired, snap the keystone modules into the designated openings in the wall outlet housing. They are designed to click securely into place.
2. Ensure the modules are oriented correctly, with the RJ45 port facing outwards.

Image 4.3: Installation diagram showing the dimensions of the wall outlet and the method for inserting the keystone modules into the housing.

Image 4.4: Rear view of the deleyCON wall outlet, demonstrating two keystone modules securely snapped into their respective positions within the metal mounting frame.

4.4 Final Assembly

1. Attach the outer cover plate to the mounted housing. It should snap or screw into place depending on the design.
2. Optionally, use the label holder and viewing window to identify the ports.
3. Restore power to the installation area.

Image 4.5: The deleyCON RJ45 Keystone Wall Outlet fully assembled, showing the white faceplate and two RJ45 ports ready for use.

5. Operation

Once installed, the deleyCON RJ45 Keystone Wall Outlet functions as a standard network connection point.

1. Connect a standard RJ45 patch cable from your network device (e.g., computer, printer, Smart TV, game console) to one of the RJ45 ports on the wall outlet.
2. Ensure the other end of the patch cable is connected to a network switch, router, or other active network equipment.
3. The connection should be established automatically. Verify network connectivity on your device.

Image 5.1: The deleyCON RJ45 Keystone Wall Outlet installed in a wall, with two black RJ45 network cables plugged into its ports, demonstrating typical usage.

6. Maintenance

The deleyCON RJ45 Keystone Wall Outlet requires minimal maintenance.

• Keep the ports free from dust and debris. Use a soft, dry cloth for cleaning the exterior.
• Do not use liquid cleaners directly on the ports.
• Periodically check patch cables for damage and replace if necessary.

7. Troubleshooting

8. Specifications

• Brand: deleyCON
• Model: RJ45 Keystone Wall Outlet (B076F7NL4G)
• Color: White
• Connector Type: RJ45
• Keystone Module Type: Cat6a, Fully Shielded
• Data Transfer Rate: 10/100/1000/10000 Mbit/s (10 Gigabit Ethernet)
• Transmission Bandwidth: Up to 500 MHz
• Compatibility: Cat5, Cat5e, Cat6, Cat6a cables
• Wiring Standard: EIA/TIA568A and B
• Conductor Type: Solid conductors AWG 22-25
• Material: Metal (Keystone modules, mounting frame), Plastic (Housing)
• Installation: Flush-mounted
• Features: Tool-free assembly, viewing window, label holder, protective caps on RJ45 ports.

Image 8.1: Dimensional drawing of the deleyCON RJ45 Keystone Wall Outlet, showing key measurements for installation.

9. Warranty Information

deleyCON products are manufactured with high-quality materials and undergo strict quality control. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official deleyCON website. Keep your proof of purchase for warranty claims.

10. Customer Support

If you encounter any issues or have questions regarding your deleyCON RJ45 Keystone Wall Outlet, please contact deleyCON customer support. Contact information can typically be found on the product packaging or the official deleyCON website.

For more information, visit: www.deleycon.com