Introduction
This manual provides essential information for the safe and effective use of your UpBright 12V AC/DC Adapter. This adapter is designed to provide reliable power to compatible devices, specifically various models of the Bissell SpotLifter 2X Handheld Cordless Essential Portable Carpet Deep Cleaner Vacuum.
Figure 1: Front view of the UpBright 12V AC/DC Adapter.
The adapter features a wide input voltage range (100-240VAC) for global compatibility and includes built-in safety protections such as Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to ensure the safety of your device.
Safety Information
Please read and understand all safety instructions before using the adapter. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Indoor Use Only: This adapter is designed for indoor use. Do not expose it to rain, moisture, or extreme temperatures.
- Proper Ventilation: Ensure the adapter has adequate ventilation. Do not cover it or place it in an enclosed space during operation.
- Avoid Liquids: Do not immerse the adapter in water or any other liquid. Avoid spilling liquids on the adapter.
- Handle with Care: Do not drop, impact, or disassemble the adapter.
- Correct Voltage: Only connect the adapter to power outlets within the specified input voltage range (100-240VAC).
- Compatible Devices: Use this adapter only with devices that match its voltage and current specifications. Refer to your device's manual for compatibility.
- Unplug When Not In Use: Disconnect the adapter from the power outlet when not in use for extended periods.
- Damaged Cords: Do not use the adapter if the cord or plug is damaged. Contact customer support for replacement.
Setup
Unpacking
- Carefully remove the UpBright 12V AC/DC Adapter from its packaging.
- Inspect the adapter for any signs of damage. If damaged, do not use and contact customer support.
- Ensure all components listed in the packaging are present.
Connecting the Adapter
- Locate the power input port on your compatible device (e.g., Bissell SpotLifter 2X).
- Insert the barrel round connector of the UpBright adapter firmly into the device's power input port.
- Plug the AC prongs of the adapter into a standard wall power outlet (100-240VAC, 50/60Hz).
- Ensure the connection is secure at both the device and the wall outlet.
Figure 2: The adapter with its cable, ready for connection.
Operating Instructions
Once the UpBright 12V AC/DC Adapter is properly connected to your compatible device and a power outlet, it will begin to supply power or charge the device's battery, depending on the device's design.
- For charging, observe the charging indicator on your device (if available) to confirm it is receiving power.
- Allow sufficient time for your device's battery to fully charge as per its manufacturer's recommendations.
- The adapter is designed for continuous use within its specified limits. However, it is good practice to unplug the adapter when the device is fully charged or not in use for extended periods.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your UpBright AC/DC Adapter.
- Cleaning: Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the surface of the adapter. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Cable Inspection: Periodically inspect the power cord and connector for any signs of wear, cuts, or damage. If damage is observed, discontinue use and replace the adapter.
Troubleshooting
If you encounter issues with your UpBright 12V AC/DC Adapter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Adapter not providing power. |
|
|
| Device not charging. |
|
|
| Adapter feels hot. |
|
|
If the problem persists after attempting these solutions, please contact UpBright customer support.
Specifications
Key technical specifications for the UpBright 12V AC/DC Adapter:
| Feature | Detail |
|---|---|
| Product Dimensions | 3 x 2 x 1 inches |
| Item Weight | 2.39 ounces |
| Model Number | BISSELL Spot Lifter 2X 1719 12V Power (Compatible with various models: 1718, 1719, 1719-B, 17191, 17192, 1719Q, 1719T, 1719Y, 1719Z, 160-2178, 203-2577, 203-2578, 203-2579, etc.) |
| Input Voltage | 100-240VAC, 50/60Hz |
| Output Voltage | 12VDC |
| Output Amperage | 170mA (0.17A) |
| Wattage | 4 watts |
| Connector Type | Barrel Round Connector |
| Safety Features | OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection) |
| Included Components | 1 power cord |
Warranty Information
UpBright products are designed for reliability and performance. This adapter comes with a limited warranty to protect your purchase.
- Refund Policy: UpBright offers a 30-day refund period from the date of purchase.
- Exchange Policy: A 24-month exchange policy is provided for defective units.
- For detailed terms and conditions, please refer to the warranty certificate included with your product or contact UpBright customer support.
Figure 3: Example of international outlet adapters and a warranty certificate.
Customer Support
If you have any questions, require assistance, or need to claim warranty service, please contact UpBright customer support. Have your product model number and purchase details ready for faster service.
For the most current contact information, please visit the official UpBright website or refer to the packaging of your product.