Bosch 7 kg Fully Automatic Front Loading Washing Machine

1. Important Safety Information

Please read this instruction manual carefully before operating your Bosch washing machine. Keep it for future reference. Failure to follow these instructions may result in property damage, personal injury, or voiding of your warranty.

• This appliance is intended for domestic use only.
• Ensure the appliance is properly installed and earthed by a qualified person.
• Do not allow children to play with or operate the appliance.
• Never force the door open. Wait until the program has finished and the door lock has released.
• Unplug the appliance from the power supply before cleaning or maintenance.
• Do not wash items that have been soiled with flammable substances.

2. Product Overview

The Bosch WAK24169IN is a 7 kg fully automatic front-loading washing machine designed for efficient and gentle laundry care.

This image displays the front view of the Bosch 7 kg Fully Automatic Front Loading Washing Machine, model WAK24169IN, in silver. It shows the main body, the front-loading door, and the control panel located at the top right.

Control Panel

A close-up view of the control panel for the Bosch WAK24169IN washing machine. It features a central rotary dial for program selection, buttons for 'Start/Reload', and various program options like 'Cottons', 'Synthetics', 'Delicates/Silk', 'Wool', 'Super 15/30 min', 'Refresh', 'Gentle Wash', 'AllergyPlus', 'KidsWear', 'Drum Clean', 'Rinse', and 'Spin/Drain', along with temperature settings.

The control panel allows you to select wash programs, adjust settings, and start/pause the washing cycle.

3. Setup and Installation

3.1 Unpacking

• Remove all packaging materials, including the polystyrene base and any protective film.
• Check the appliance for any transport damage. Do not operate a damaged appliance.

3.2 Removing Transport Bolts

Before using the machine, you must remove the transport bolts located at the rear of the appliance. Failure to do so will cause severe vibration and damage during operation.

1. Loosen all transport bolts using the supplied wrench.
2. Remove the bolts and their sleeves.
3. Insert the plastic caps provided into the holes.

3.3 Location and Leveling

• Place the washing machine on a firm, level surface.
• Adjust the appliance's feet to ensure it is perfectly level. Use a spirit level to verify.
• Ensure there is adequate ventilation around the machine.

3.4 Water Connection

• Connect the cold water inlet hose to a tap with a 3/4" thread.
• Ensure all connections are tight to prevent leaks. Do not overtighten.

3.5 Drain Connection

• The drain hose can be hooked into a sink or connected to a standpipe.
• Ensure the drain hose is not kinked or obstructed. The end of the hose must be between 60 cm and 100 cm from the floor.

3.6 Electrical Connection

• Plug the power cord into a properly earthed socket.
• Ensure the voltage and frequency match the specifications on the rating plate of the appliance.

4. Operating Instructions

4.1 Before First Use

Run an empty wash cycle at 60°C without laundry to clean the drum and remove any manufacturing residues.

4.2 Loading Laundry

• Open the door and load laundry loosely into the drum. Do not overload the machine.
• Close the door firmly until it clicks shut.

4.3 Adding Detergent and Additives

Pull out the detergent drawer. Add detergent to the main wash compartment (II) and fabric softener to the compartment marked with a flower symbol. Pre-wash detergent goes into compartment (I).

4.4 Selecting a Program

1. Turn the program selector dial to the desired wash program (e.g., Cottons, Synthetics, Delicates/Silk, Wool).
2. Adjust temperature and spin speed if necessary using the corresponding buttons.

4.5 Starting the Wash Cycle

Press the 'Start/Reload' button to begin the selected program. The indicator light will illuminate.

4.6 Pausing and Reloading

To pause a running program, press the 'Start/Reload' button. If the water level and temperature allow, the door will unlock, and you can add or remove laundry. Press 'Start/Reload' again to resume.

4.7 End of Program

The program ends when the 'End' indicator lights up. The door will unlock automatically. Remove laundry promptly to prevent creasing.

4.8 Child Lock

To activate the child lock, press and hold the 'Spin' and 'Temp' buttons simultaneously for approximately 3 seconds. A key symbol will appear on the display. Repeat the process to deactivate.

5. Maintenance and Care

5.1 Cleaning the Exterior

Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.

5.2 Cleaning the Detergent Drawer

Regularly remove and clean the detergent drawer under running water to prevent detergent residue buildup.

5.3 Cleaning the Drain Pump Filter

The drain pump filter should be cleaned periodically to remove lint and small objects. Refer to the diagram in your physical manual for the exact location and procedure.

5.4 Drum Clean Program

Use the 'Drum Clean' program (if available on your model) or run a hot wash cycle with a descaling agent or washing machine cleaner every few months to maintain drum hygiene.

6. Troubleshooting

Before contacting customer service, please check the following common issues:

7. Specifications

8. Warranty and Support

Your Bosch washing machine comes with a manufacturer's warranty. Please refer to the warranty card provided with your appliance for specific terms and conditions, including the warranty period and coverage details.

For technical assistance, service requests, or to order spare parts, please contact Bosch customer support. Contact details can typically be found in your warranty documentation or on the official Bosch website for your region.