HOBBYWING HWI38010203

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Hobby Wing Max10 ESC with 3652SL Brushless Motor Combo (3300Kv) Instruction Manual

Model: HWI38010203

1. Introduction

Thank you for choosing the HOBBYWING Max10 ESC with 3652SL Brushless Motor Combo. This high-performance electronic speed controller (ESC) and brushless motor combination is designed for remote-controlled vehicles, offering robust power and precise control. This manual provides essential information for proper setup, operation, and maintenance to ensure optimal performance and longevity of your product.

Hobby Wing Max10 ESC and 3652SL Brushless Motor Combo

Image: The Hobby Wing Max10 ESC and 3652SL Brushless Motor Combo, featuring the ESC, motor, and associated wiring.

2. What's in the Box

Your Hobby Wing 38010203 MAX10 ESC, with 3652Sl Brushless Motor - Combo (3300kV) package includes the following components:

  • Hobby Wing 38010203 MAX10 Electronic Speed Controller (ESC)
  • Hobby Wing 3652SL Brushless Motor (3300Kv)

3. Setup

Follow these steps to correctly set up your ESC and motor combo:

  1. Motor Connection: Connect the 3.5mm bullet connectors from the 3652SL Brushless Motor to the corresponding output motor connectors on the Max10 ESC. Ensure a secure connection for optimal power transfer.
  2. Battery Connection: Connect your battery pack to the Max10 ESC. The ESC supports 2-3S LiPo or 6-9 cells NiMH batteries. Verify correct polarity before connecting.
  3. ESC Programming: The Max10 ESC features a programmable low voltage cut-off and an adjustable brake curve. Refer to the detailed ESC manual (not included in this general product manual) for specific programming instructions to customize these settings according to your battery type and driving preferences. The ESC also supports a reversible function with lockout.
  4. Motor Shaft Compatibility: The 3652SL motor has a shaft diameter of 3.175mm (1/8"). Ensure your pinion gear is compatible with this shaft size.

4. Operating

Once properly set up, your Hobby Wing combo is ready for operation. Observe the following operational guidelines:

  • Input Voltage: The Max10 ESC operates with a maximum input voltage of 2-3S LiPo (Lithium Polymer) or 6-9 cells NiMH (Nickel-Metal Hydride) batteries. Do not exceed these voltage limits.
  • Amp Rating: The ESC has an amp rating of 60A. Ensure your motor and battery combination does not consistently draw current exceeding this rating to prevent damage.
  • Reversible Function: The ESC supports a reversible function, which can be enabled or disabled with a lockout feature. This allows for forward and reverse movement of your vehicle.

Video: A remote-controlled brushless monster truck, similar to the one powered by this combo, demonstrating high-speed operation and jumps on a dirt track. The video highlights the truck's agility and power, kicking up dust as it maneuvers and performs aerial stunts.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Hobby Wing ESC and motor combo:

  • Cleaning: After each use, especially in dusty or dirty conditions, clean the ESC and motor to remove any debris. Use a soft brush or compressed air.
  • Connection Check: Periodically inspect all electrical connections, especially the 3.5mm bullet connectors and battery connections, to ensure they are secure and free from corrosion.
  • Motor Inspection: Check the motor for any signs of wear or damage, particularly the shaft and bearings.
  • ESC Cooling: Ensure the ESC's cooling fan (if applicable) is free from obstructions and functioning correctly to prevent overheating.

6. Troubleshooting

If you encounter issues with your ESC and motor combo, consider the following basic troubleshooting steps:

  • No Power: Check battery connections, ensure the battery is charged, and verify the ESC is properly switched on.
  • Motor Not Responding: Inspect motor wire connections to the ESC. Ensure the ESC is correctly calibrated with your radio system.
  • Overheating: Check for obstructions to the ESC or motor cooling fans. Reduce load or adjust gearing if consistent overheating occurs.
  • Erratic Behavior: Verify all wiring is secure and free from damage. Check for radio interference or issues with your receiver.

For more advanced troubleshooting, consult the specific Max10 ESC manual or contact HOBBYWING customer support.

7. Specifications

Detailed specifications for the Hobby Wing Max10 ESC and 3652SL Brushless Motor Combo:

ComponentFeatureSpecification
Max10 ESCMax Input Voltage2-3S LiPo / 6-9 cells NiMH
Amp Rating60A
BrakeProportional with adjustable curve
ReversibleYes - with lockout
Low Voltage Cut-offYes, programmable
Size (w/o Fan)39.4x32.8x23.1mm
3652SL Brushless MotorKv Rating3300Kv
Max Input Voltage3S 11.1V LiPo
Motor Diameter36mm
Motor Length52mm
Shaft Diameter3.175mm (1/8")
GeneralOutput Motor Connectors3.5mm bullet
Weight (w/ wires)67.8g (ESC) / 218g (Motor)

8. Warranty & Support

For warranty information, technical support, or service inquiries, please refer to the official HOBBYWING website or contact their customer service department directly. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.