1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Orbegozo DS 48190 B IN Decorative Extractor Hood. Please read these instructions carefully before using the appliance and retain them for future reference.
Image 1.1: Orbegozo DS 48190 B IN Decorative Extractor Hood.
2. Safety Instructions
To ensure safe operation, always adhere to the following guidelines:
- Ensure the electrical installation is compliant with local regulations.
- Do not allow children to operate the appliance.
- Regularly clean the grease filters to prevent fire hazards.
- Do not flambé under the extractor hood.
- Ensure adequate ventilation in the room when the hood is used simultaneously with gas or other fuel-burning appliances.
- Disconnect the appliance from the power supply before any cleaning or maintenance.
3. Product Features
The Orbegozo DS 48190 B IN extractor hood is designed for efficient kitchen ventilation, offering a blend of performance and functionality.
- Powerful Extraction: Equipped with a 190 W motor, providing an extraction capacity of 630 m³/h to effectively remove odors, smoke, and steam.
- Adjustable Chimney: The chimney height can be adjusted from 50 cm to 98 cm to suit various kitchen layouts.
- LED Lighting: Features two 2.5 W LED bulbs to illuminate your cooking area efficiently.
- Multiple Power Levels: Three distinct power levels allow you to select the appropriate extraction intensity for different cooking needs.
- Durable Construction: Made from stainless steel for longevity and easy cleaning.
Image 3.1: Illustration highlighting the powerful 190W motor and 630 m³/h extraction capacity.
4. Dimensions
The following diagram illustrates the dimensions of the Orbegozo DS 48190 B IN extractor hood. All measurements are in millimeters unless otherwise specified.
Image 4.1: Dimensional drawing of the extractor hood. The chimney is adjustable in height from 500 to 980 mm, depending on installation requirements.
Overall dimensions (width x depth x height): 90 cm x 50 cm x 74-112 cm.
5. Installation
Installation should be performed by a qualified technician in accordance with all local and national building and electrical codes. Ensure the mounting surface is strong enough to support the weight of the hood.
- Mounting: The hood is designed for wall mounting. Securely attach the mounting bracket to the wall at the appropriate height above your cooking surface.
- Ducting: Connect the exhaust outlet to an external ducting system. Ensure the ducting is of adequate diameter and as short and straight as possible for optimal performance.
- Electrical Connection: Connect the hood to a grounded electrical outlet. Verify the voltage matches the appliance's requirements (220 Volts).
- Chimney Assembly: Assemble and adjust the decorative chimney sections to cover the ducting and mounting hardware.
6. Operating Instructions
The Orbegozo DS 48190 B IN features user-friendly controls located on the front panel.
- Power On/Off: Press the power button to turn the hood on or off.
- Fan Speed Selection: Use the control buttons to select one of the three available fan speeds (low, medium, high) based on the intensity of cooking fumes.
- Light Control: Press the light button to turn the LED cooking lights on or off.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your extractor hood.
- Grease Filter Cleaning: The hood is equipped with three removable aluminum mesh filters. These should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to maintain extraction efficiency. They can be washed by hand with hot soapy water or in a dishwasher.
- Exterior Cleaning: Clean the exterior surfaces of the hood with a soft cloth and a non-abrasive cleaner suitable for stainless steel. Avoid harsh chemicals or abrasive materials that could damage the finish.
- LED Bulb Replacement: If an LED bulb needs replacement, ensure the appliance is disconnected from the power supply. Consult a qualified technician if you are unsure how to replace them.
Image 7.1: Illustration of the easily removable aluminum filters for cleaning.
8. Troubleshooting
Before contacting customer service, please check the following common issues:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hood does not turn on. | No power supply. | Check if the plug is correctly inserted and the circuit breaker is on. |
| Low extraction power. | Grease filters are clogged. | Clean or replace the grease filters. |
| Excessive noise. | Improper installation or foreign object in fan. | Ensure the hood is securely mounted. Check for any obstructions in the fan or ducting. |
| Lights not working. | Faulty LED bulb. | Replace the LED bulb. |
9. Technical Specifications
| Feature | Specification |
|---|---|
| Model Number | DS48190BIN |
| Brand | Orbegozo |
| Motor Power | 190 W |
| Extraction Capacity | 630 m³/h |
| Chimney Adjustment Range | 50 - 98 cm |
| Power Levels | 3 |
| Lighting | 2 x 2.5 W LED bulbs |
| Dimensions (W x D x H) | 90 x 50 x 74-112 cm |
| Material | Stainless Steel |
| Filter Type | Mesh (3 removable aluminum filters) |
| Noise Level | 44 dB |
| Voltage | 220 V |
| Energy Efficiency Class | B |
| Mounting Type | Wall Mount |
Image 9.1: Energy Efficiency Label for the Orbegozo DS 48190 B IN.
10. Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your purchase or contact Orbegozo customer support. Keep your proof of purchase for any warranty claims.
For technical assistance, spare parts, or service inquiries, please contact Orbegozo customer service through their official channels. The availability of spare parts in the EU is typically 2 years from the date of purchase.
