1. Product Overview
The SW-Motech STP.08.868.10000/B Sturzpad Kit is designed to provide additional protection for the frame, engine, and fairing of Kawasaki Z900 (2016) and Z900RS (2017) motorcycles. These crash pads feature CNC-milled, metal-free abrasive pads made from durable polyamide, engineered to reduce potential damage during a fall. The optimized surface is designed to offer a better gliding effect compared to traditional crash pads.
2. Safety Information
- Always ensure the motorcycle is stable and securely supported before beginning installation.
- Wear appropriate personal protective equipment (PPE) during installation.
- If you are unsure about any step of the installation process, consult a qualified motorcycle mechanic.
- Ensure all fasteners are tightened to the manufacturer's specified torque values. Over-tightening or under-tightening can lead to component failure.
- Keep all parts and tools away from children and pets.
3. Package Contents
Verify that all components are present before beginning installation:
- 2 x Sturzpads (for left and right side)
- Mounting material (fasteners, spacers, etc.)
- Mounting instructions (this document)
4. Installation Instructions
The Sturzpad kit is designed for quick and easy assembly, utilizing original attachment points on the motorcycle frame. Follow these general steps:
- Prepare the Motorcycle: Park the motorcycle on a level surface and secure it using a stand. Ensure the engine is cool.
- Identify Mounting Points: Locate the designated attachment points on the motorcycle frame for the crash pads. These are typically existing bolt locations.
- Panel Cut-out (if applicable): For some motorcycle models, it may be necessary to make a small cut-out in the fairing panel to accommodate the crash pad and mounting plate. Refer to the specific instructions provided with the kit for precise measurements and location. Use an appropriate tool for this task to ensure a clean cut and sufficient clearance.
- Attach Mounting Hardware: Secure the mounting brackets/plates to the frame using the provided fasteners. Do not fully tighten at this stage.
- Install Sturzpads: Attach the polyamide Sturzpads to the mounting hardware. Ensure they are correctly oriented (left and right sides).
- Final Tightening: Once both Sturzpads are in place and aligned, progressively tighten all fasteners to the recommended torque specifications.
- Inspect: After installation, visually inspect all components to ensure they are securely fastened and do not interfere with any moving parts or controls of the motorcycle.
Image 1: Close-up view of the SW-Motech Sturzpad installed on a motorcycle frame, showing its robust design and integration with the engine area.
5. Maintenance
To ensure the continued effectiveness and safety of your SW-Motech Sturzpad Kit, perform the following maintenance checks:
- Regular Inspection: Periodically check the crash pads and their mounting hardware for any signs of damage, wear, or looseness.
- Fastener Tightness: Ensure all mounting bolts remain securely tightened. Re-tighten if necessary, adhering to recommended torque values.
- Cleaning: Clean the crash pads with a mild soap and water solution. Avoid harsh chemicals that may damage the polyamide material.
- Replacement: The metal-free abrasive pads are designed to be easily replaceable in case of damage. Contact SW-Motech or an authorized dealer for replacement parts.
6. Troubleshooting
If you encounter any issues with your Sturzpad Kit, consider the following:
- Loose Components: If any part of the Sturzpad feels loose, re-check the tightness of all mounting bolts.
- Improper Fit: Double-check that the correct kit for your specific motorcycle model (Kawasaki Z900 2016 or Z900RS 2017) has been installed. Review the installation steps carefully.
- Unusual Noise: Ensure no part of the Sturzpad or its mounting hardware is making contact with other motorcycle components during operation.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | SW-Motech |
| Model Number | STP.08.868.10000/B |
| Compatibility | Kawasaki Z900 (2016), Kawasaki Z900RS (2017) |
| Material (Sanding Disc) | Durable Polyamide (metal-free) |
| Material (Attachment) | Steel, Powder Coated |
| Color | Black |
| Item Weight | 1.85 pounds (approx. 0.84 kg) |
| Product Dimensions | 10.63 x 3.94 x 2.36 inches (approx. 27 x 10 x 6 cm) |
| Manufacturer Part Number | STP.08.868.10000/B |
| ASIN | B076DBM16G |
8. Warranty and Support
For specific warranty information or technical support regarding your SW-Motech Sturzpad Kit, please refer to the official SW-Motech website or contact their customer service directly. Keep your proof of purchase for any warranty claims.
