Introduction
Welcome to the instruction manual for your TAKARA TOMY B-97 Beyblade Burst Starter Nightmare Longinus.Ds. This manual provides essential information for the safe and proper assembly, operation, and maintenance of your spinning top. Please read this manual thoroughly before use and retain it for future reference.
Safety Information
This product is intended for users aged 13-15 years as recommended by the manufacturer. Adhere to the following safety guidelines:
- Keep small parts away from young children to prevent choking hazards.
- Do not aim the spinning top at people or animals.
- Use only in designated Beyblade Burst stadiums to prevent damage or injury.
- Inspect the spinning top and launcher for damage before each use. Do not use if damaged.
- Avoid modifying the product, as this may compromise safety and performance.
Package Contents
Verify that all components are present in your package:
- 1x Nightmare Longinus.Ds Spinning Top (Layer, Disk, Driver)
- 1x W Launcher (Launcher and Ripcord)
- 1x Sticker Sheet (for customization)
- 1x Instruction Sheet (original language, refer to this manual for English instructions)
Image showing the complete TAKARA TOMY B-97 Beyblade Burst Starter Nightmare Longinus.Ds set, including the Nightmare Longinus.Ds spinning top and the W Launcher with its ripcord.
Assembly and Setup
1. Attaching Stickers
Carefully apply the provided stickers to the Nightmare Longinus.Ds spinning top according to the visual guides on the sticker sheet or packaging. Use tweezers for precision if available.
2. Assembling the Spinning Top
The Nightmare Longinus.Ds spinning top consists of three main parts: the Layer (which includes the integrated Disk) and the Driver. Follow these steps to assemble:
- Align the three tabs on the Driver with the corresponding slots on the underside of the Layer.
- Push the Driver firmly into the Layer and twist clockwise until it locks securely into place. You should hear a distinct click.
Diagram illustrating the components of the Beyblade Burst spinning top and the assembly process, showing how the Layer, Disk, and Driver connect.
3. Preparing the W Launcher
Insert the ripcord into the W Launcher. Ensure the teeth of the ripcord engage properly with the gear inside the launcher. The ripcord should slide in smoothly and be held firmly.
Image of the W Launcher with the blue ripcord correctly inserted, ready for launching a Beyblade.
Operation
1. Loading the Beyblade
Hold the W Launcher firmly. Attach the assembled Nightmare Longinus.Ds spinning top to the launcher by aligning the tabs on the Beyblade with the slots on the launcher. Twist the Beyblade counter-clockwise until it locks into place. Ensure the Beyblade is securely attached and the ripcord is fully inserted.
2. Launching the Beyblade
Hold the launcher over a Beyblade Burst stadium. Pull the ripcord swiftly and horizontally to launch the Beyblade into the stadium. The Nightmare Longinus.Ds is a left-spin Beyblade.
Top-down view of the Nightmare Longinus.Ds spinning top, showcasing its design and left-spin orientation.
3. Battle Rules
Beyblade Burst battles typically involve two Beyblades. The objective is to achieve a Burst Finish, Ring Out Finish, or Survivor Finish against your opponent. The first player to reach a predetermined number of points (e.g., 3 or 5) wins the battle.
- Burst Finish: 2 points (opponent's Beyblade bursts into pieces).
- Ring Out Finish: 1 point (opponent's Beyblade is knocked out of the stadium).
- Survivor Finish: 1 point (opponent's Beyblade stops spinning before yours).
Maintenance
To ensure the longevity and optimal performance of your Beyblade Burst Starter Nightmare Longinus.Ds, follow these maintenance guidelines:
- After each use, wipe the spinning top and launcher with a dry, soft cloth to remove dust and debris.
- Store the components in a cool, dry place, away from direct sunlight and extreme temperatures.
- Avoid dropping the Beyblade or launcher, as this can cause damage to the plastic and internal mechanisms.
- Do not apply lubricants, solvents, or other chemicals to any parts, as this may degrade the plastic and affect performance.
Troubleshooting
Refer to the table below for common issues and their recommended solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Beyblade does not launch properly | Ripcord not fully inserted or engaged. Beyblade not securely attached to launcher. | Ensure ripcord is fully inserted and its teeth are engaged. Twist Beyblade counter-clockwise until it clicks securely onto the launcher. |
| Beyblade bursts too easily | Loose assembly of Beyblade parts. High impact with stadium or opponent. | Ensure the Driver is twisted securely onto the Layer. Practice launching technique for smoother spins and reduced impact. |
| Launcher mechanism feels stiff | Debris inside launcher. | Gently shake the launcher to dislodge any debris. Do not attempt to disassemble the launcher. |
If problems persist after attempting these solutions, please contact customer support.
Specifications
- Product Name: TAKARA TOMY B-97 Beyblade Burst Starter Nightmare Longinus.Ds W Launcher Spinning Top
- Model Number: B-97
- Brand: TOMY (Takaratomy)
- Product Dimensions: Approximately 2 x 1 x 2 inches (spinning top)
- Item Weight: Approximately 4.2 ounces (complete set)
- Recommended Age: 13 - 15 years
- Spin Direction: Left-spin
- UPC: 4904810896036 / 4904810106777
- Release Date: July 26, 2018
Warranty and Support
This product is manufactured by Takaratomy. For specific warranty information, please refer to the product packaging or contact Takaratomy customer service directly.
For further assistance, inquiries, or to explore more about Beyblade Burst products, please visit the official Takaratomy Beyblade website or contact their customer support channels.
Official Takaratomy Beyblade website: beyblade.takaratomy.co.jp
For general inquiries, you may also refer to the TOMY Store on Amazon: TOMY Store on Amazon