ICM ICM 24008

Download PDF
Contents

ICM 24008 Model T 1912 Light Delivery Car Plastic Model Kit Instruction Manual

Brand: ICM | Model: ICM 24008

1. Introduction

This manual provides detailed instructions for the assembly, finishing, and care of your ICM 24008 Model T 1912 Light Delivery Car plastic model kit. This kit is designed for model enthusiasts aged 15 years and older. Please read all instructions carefully before beginning assembly.

Safety Information

  • Keep small parts away from young children to prevent choking hazards.
  • Use appropriate ventilation when working with glues and paints.
  • Always use sharp tools with caution.
  • Dispose of waste materials responsibly.

2. Package Contents

Upon opening the box, verify that all components are present and undamaged. The kit typically includes:

  • Plastic sprues containing model parts (approximately 108 pieces).
  • Self-printed decals.
  • Assembly instruction booklet.
  • Rubber tires.

Note: Glue and paint are not included in this kit and must be purchased separately.

ICM 24008 Model T 1912 Light Delivery Car model kit box

Image 2.1: The product box for the ICM 24008 Model T 1912 Light Delivery Car kit. The box displays an illustration of the assembled model.

ICM 24008 Model T 1912 Light Delivery Car model kit box with features

Image 2.2: Front view of the ICM 24008 Model T 1912 Light Delivery Car kit box, highlighting key features such as "highly detailed chassis and engine" and "rubber tires are included."

3. Assembly Instructions

Follow the step-by-step diagrams and instructions provided in the dedicated assembly manual included with your kit. General steps include:

  1. Part Preparation: Carefully remove parts from the sprues using a hobby knife or sprue cutters. Clean any excess plastic (flash) with a file or sandpaper.
  2. Sub-Assembly: Assemble smaller sections of the model first, such as the engine, chassis, and interior components.
  3. Main Assembly: Join the sub-assemblies to form the complete vehicle structure.
  4. Detailing: Attach smaller detail parts, such as lights, mirrors, and other exterior accessories.

Ensure parts fit correctly before applying glue. Test fit components to avoid misalignment.

3D render of the ICM Model T 1912 Light Delivery Car from front-top

Image 3.1: A 3D render showing the front-top view of the Model T 1912 Light Delivery Car, illustrating the overall shape and initial assembly components.

3D render of the ICM Model T 1912 Light Delivery Car from side

Image 3.2: A 3D render showing the side profile of the Model T 1912 Light Delivery Car, useful for understanding the vehicle's proportions and part placement.

4. Finishing and Display

Painting

Once assembled, the model can be painted. Refer to the box art or historical references for color schemes. Use model-specific paints (acrylic, enamel, or lacquer) and apply thin coats for best results. Allow each coat to dry thoroughly before applying the next.

Decals

Apply the self-printed decals according to the instructions. Cut out each decal, dip it in water for a few seconds, and slide it onto the model. Use a soft brush to position it correctly and gently blot away excess water. Decal setting solutions can help them conform to irregular surfaces.

Display

After painting and decaling, a clear coat can be applied to protect the finish. Display your finished model in a dust-free environment, away from direct sunlight to prevent fading.

Assembled and painted ICM Model T 1912 Light Delivery Car in red with Coca-Cola livery

Image 4.1: An example of a fully assembled and painted Model T 1912 Light Delivery Car model, featuring a custom red paint scheme and Coca-Cola livery. This demonstrates a potential finished appearance, though the kit's default livery may differ.

5. Maintenance

To preserve the appearance of your model:

  • Cleaning: Gently dust the model with a soft brush or a can of compressed air. Avoid using harsh chemicals or abrasive cloths.
  • Storage: Store the model in a display case or a cool, dry place away from direct sunlight and extreme temperature fluctuations.

6. Troubleshooting

  • Parts not fitting: Ensure you are using the correct parts as indicated in the assembly manual. Check for any excess plastic (flash) on the parts that might prevent a proper fit and carefully trim it.
  • Missing or damaged parts: If you discover any missing or significantly damaged parts upon opening the kit, please contact ICM customer support with your proof of purchase and a description of the issue.
  • Decals not adhering: Ensure the surface is clean and smooth. Use decal setting solution to help decals conform and adhere better.

7. Specifications

FeatureDetail
BrandICM
Model NameModel T 1912 Light Delivery Car
Model NumberICM 24008
Scale1:24
MaterialPlastic
Number of Pieces108
Recommended Age15 years +
Product Dimensions (L x W x H)5.71 x 3.74 x 2.36 inches
Item Weight12.3 ounces (0.35 Kilograms)

8. Warranty and Support

ICM strives to provide high-quality model kits. For questions regarding missing parts, assembly issues, or general inquiries, please refer to the contact information provided on the product packaging or visit the official ICM website. Specific warranty details are typically outlined within the product packaging or on the manufacturer's website.

As noted, glue and paint are essential for completing this model but are not included in the kit. Please ensure you acquire these separately from a reputable hobby supplier.

© 2023 ICM Holding. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.