ResMed CPS33-624-63460-FBA
Contents
ResMed AirFit F20 Frame System User Manual
Model: CPS33-624-63460-FBA
Introduction
The ResMed AirFit F20 Frame System is an essential component designed to integrate seamlessly with your full face CPAP mask. It is engineered to provide a secure and comfortable fit, crucial for effective sleep apnea therapy. This frame system is a replacement accessory, ensuring continued optimal performance of your CPAP setup.
The AirFit F20 frame features the innovative InfinitySeal cushion (note: cushion sold separately, this product is the frame system only), which adapts to facial contours to maintain a secure seal across various pressure levels. Its quick-release elbow design allows for easy disconnection from the CPAP device, minimizing disruptions during sleep. ResMed is committed to providing high-quality, durable CPAP supplies that enhance your therapy experience.

Image: The ResMed AirFit F20 Frame System, showcasing its clear frame and gray soft components.
Components
This product includes the ResMed AirFit F20 Frame System. Please note that the headgear and cushion are not included with this frame system and must be purchased separately for a complete mask assembly.
- Frame System: The main structure that holds the cushion and connects to the headgear.
- Quick-Release Elbow: Allows for easy disconnection from the CPAP tubing.
- Magnetic Clips: For quick and secure attachment to the headgear.

Image: An exploded view illustrating the various components of the AirFit F20 mask system, including the frame, cushion, elbow, and headgear. This product specifically includes the frame system.
Setup and Assembly
To assemble your ResMed AirFit F20 mask with the new frame system, follow these general steps. Ensure all components are clean before assembly.
- Attach Cushion: Align the InfinitySeal cushion (sold separately) with the frame and press firmly until it clicks securely into place.
- Connect Headgear: Thread the upper headgear straps through the slots on the top of the frame. Secure the lower headgear straps to the magnetic clips on the frame.
- Attach Elbow: Insert the quick-release elbow into the opening on the front of the mask frame until it is firmly seated.
- Connect Tubing: Connect your CPAP tubing to the quick-release elbow.

Image: Hands demonstrating how to hold and check the size of the AirFit F20 Frame System, indicating the "S" for small size.
Fitting and Adjustment
Proper fitting of your AirFit F20 mask is essential for comfort and effective therapy. Adjust the headgear straps to achieve a secure but not overly tight fit.
- Hold the mask against your face and pull the headgear over your head.
- Adjust the top straps evenly until the mask is stable.
- Adjust the lower straps evenly until the mask is secure and comfortable.
- Connect the CPAP tubing and turn on your device.
- Make final adjustments to the straps to eliminate any leaks, ensuring the mask is not overtightened.

Image: A man wearing the ResMed AirFit F20 mask, illustrating the comfort and convenience of the soft and flexible frame system.
Care and Maintenance
Regular cleaning and proper care will extend the life of your AirFit F20 Frame System and maintain hygiene.
Daily Care Tips:
- ✓ Replace at signs of deterioration.
- ✓ If required, wipe the outside of the foam with CPAP wipes or similar alcohol-free wipes.
- ✓ Lay flat on towel to air dry.
Important Warnings:
- ✖ Do not expose to direct sunlight.
- ✖ Do not put in dishwasher or washing machine.
- ✖ Do not use alcohol or bleach to clean.
*Please refer to the Mask User Guide for full weekly cleaning instructions.

Image: An infographic detailing daily care instructions for the AirFit frame system, including what to do and what to avoid.
Replacement Guidelines
To ensure optimal performance and hygiene, it is recommended to replace your frame system regularly.
Recommended Replacement Schedule:
We recommend replacing your frame system every 3 months.
Signs it might be time to replace your frame system:
- You are experiencing excessive leaks.
- Your therapy feels less effective than usual.
- Your frame system starts to show wear and tear (e.g., cracks, discoloration, loss of elasticity).

Image: An infographic advising replacement of the frame system every 3 months and listing signs of wear.
Troubleshooting
If you encounter issues with your AirFit F20 Frame System, consider the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Mask Leaks | Improper fit, worn cushion, incorrect assembly. | Re-adjust headgear straps, ensure cushion is properly seated, check for tears or damage on cushion (replace if necessary), ensure quick-release elbow is fully inserted. |
| Discomfort | Mask too tight, incorrect size, cushion not sealing properly. | Loosen headgear straps slightly, ensure correct mask size, check cushion for proper fit and seal. |
| Difficulty Connecting/Disconnecting | Misalignment, debris in connection points. | Ensure components are aligned correctly before pressing, clean connection points. |
If issues persist, consult your healthcare provider or refer to the complete ResMed AirFit F20 Mask User Guide for more detailed troubleshooting.
Specifications
| Feature | Detail |
|---|---|
| Product Name | ResMed AirFit F20 Frame System |
| Model Number | CPS33-624-63460-FBA |
| Product Dimensions | 8.25 x 3.6 x 6.75 inches |
| Item Weight | 7.83 ounces |
| Compatibility | Designed for ResMed AirFit F20 Full-Face CPAP Mask (cushion and headgear sold separately) |
Warranty and Support
For specific warranty information regarding your ResMed AirFit F20 Frame System, please refer to the documentation included with your original product purchase or visit the official ResMed website. ResMed provides support for its products to ensure optimal therapy experience.
If you require assistance, have questions about product usage, or need to report an issue, please contact ResMed customer support or your medical equipment provider. Always consult with your healthcare professional for medical advice related to your CPAP therapy.
You can find more information and contact details on the ResMed Store on Amazon or their official website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.