Important Safety Instructions
Please read and understand all instructions before assembling and using this lamp. Retain this manual for future reference.
- Electrical Safety: Ensure the power cord is not damaged. Do not operate the lamp if the cord or plug is damaged. Do not use with an extension cord unless the plug can be fully inserted.
- Placement: Place the lamp on a stable, flat surface to prevent tipping. Keep away from water and moisture.
- Bulb Handling: Always disconnect power before replacing the bulb. Allow the bulb to cool before touching. Use only the specified bulb type and wattage (10-watt LED).
- Indoor Use Only: This lamp is designed for indoor use in dry locations.
Package Contents
Verify that all components are present before beginning assembly:
- Lamp Base (Brushed Nickel)
- Lamp Pole (Brushed Nickel)
- Lamp Shade (White Linen)
- 10-watt LED Bulb
Image: The Lorell 10-watt LED Bulb Table Lamp, featuring a brushed nickel base and pole, topped with a cylindrical white linen shade. The lamp is shown fully assembled.
Assembly Instructions
Follow these steps to assemble your Lorell Table Lamp:
- Unpack Components: Carefully remove all parts from the packaging and place them on a clean, flat surface.
- Attach Lamp Pole to Base: Screw the threaded end of the lamp pole clockwise into the lamp base until it is securely tightened. Ensure the pole is straight and stable.
- Install LED Bulb: Carefully screw the provided 10-watt LED bulb into the lamp socket located at the top of the lamp pole. Do not overtighten.
- Place Lamp Shade: Position the white linen lamp shade over the bulb and onto the shade holder (usually a ring or saddle above the bulb socket). Secure it in place if there is a retaining ring or finial.
- Final Check: Ensure all connections are secure and the lamp is stable on its base.
Operating Instructions
To operate your Lorell Table Lamp:
- Connect Power: Plug the lamp's power cord into a standard 120-volt AC electrical outlet.
- Turn On/Off: Locate the push-button switch, typically on the lamp base or cord. Press the button once to turn the lamp on, and press it again to turn the lamp off.
Care and Maintenance
Proper care will ensure the longevity and appearance of your lamp:
- Cleaning the Base and Pole: Wipe the brushed nickel finish with a soft, dry cloth. Do not use abrasive cleaners or polishes, as they may damage the finish.
- Cleaning the Shade: Gently dust the linen shade with a soft brush or a lint roller. For minor spots, dab with a slightly damp cloth and allow to air dry completely.
- Bulb Replacement: Always unplug the lamp before replacing the LED bulb. Allow the bulb to cool completely. Replace with a 10-watt LED bulb (B10 shape size).
Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on |
|
|
| Bulb flickers |
|
|
| Lamp is unstable |
|
|
Product Specifications
| Model Name | 10-watt LED Bulb Table Lamp |
| Model Number | 99966 |
| Brand | Lorell |
| Dimensions (D x W x H) | 11.02" x 10" x 22" |
| Item Weight | 3.08 pounds |
| Material | Brushed Nickel (Base/Pole), Linen (Shade) |
| Finish Type | Brushed |
| Shade Color | White |
| Light Source Type | LED |
| Wattage | 10 watts |
| Voltage | 120 Volts |
| Switch Type | Push Button |
| Power Source | Corded Electric |
| Assembly Required | Yes |
| Indoor/Outdoor Usage | Indoor |
Warranty and Support
This Lorell Table Lamp is covered by a 90-day warranty from the date of purchase, covering defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or replacement parts, please contact Lorell customer support. Keep your purchase receipt as proof of purchase.
Customer Support: Please refer to the contact information provided with your purchase or visit the official Lorell website for support details.