BANDAI MS GUNDAM G-FRAME S.1 Mini-Figure Assembly and Care Manual

Introduction

Welcome to the instruction manual for your BANDAI MS GUNDAM G-FRAME S.1 mini-figures. This series features iconic Mobile Suits such as Nu Gundam, Unicorn Gundam, and Sazabi. Each Mobile Suit is available in two distinct sets: an Armor Set (SET A) and a Frame Set (SET B).

SET A (Armor Set): Contains the Mobile Suit's armor parts and a non-articulated display frame. This allows for a static, display-oriented presentation of the Mobile Suit.
SET B (Frame Set): Contains a mini bust, a highly articulated frame-skeleton, and the Mobile Suit's weapons. This set provides dynamic posing capabilities.

For the most comprehensive experience, it is recommended to combine both SET A and SET B. This allows you to attach the armor from SET A to the articulated frame from SET B, creating a fully poseable Mobile Suit with its complete weaponry. Alternatively, you can use the non-articulated frame from SET A for a fixed display.

Setup and Assembly

Follow these general steps for assembling your MS GUNDAM G-FRAME S.1 figures. Specific parts will vary by Mobile Suit model.

General Assembly Steps (Combining SET A and SET B)

Unpack Components: Carefully remove all parts from their packaging. Identify the armor pieces from SET A and the articulated frame, mini bust, and weapons from SET B.
Assemble the Articulated Frame: Begin by assembling the articulated frame from SET B. Refer to the exploded view image for guidance on connecting the torso, limbs, and joints. Ensure all connections are secure but avoid excessive force.
Attach Armor Pieces: Once the articulated frame is assembled, carefully attach the armor pieces from SET A to the corresponding sections of the frame. Start with larger sections like the torso and work your way to smaller details.
Assemble Weapons and Accessories: Assemble any weapons or accessories included in SET B. These typically attach to the Mobile Suit's hands or designated hardpoints.
Attach Mini Bust (Optional): The mini bust from SET B can be displayed separately or used as a head for the articulated frame if desired, though the full head unit is usually part of the armor set.

Exploded view of a Gundam G-Frame articulated skeleton with various armor parts detached, showing assembly points.

Image: Exploded view of a G-Frame articulated skeleton with armor components. This illustrates how the armor pieces attach to the inner frame.

Specific Model Overviews

Nu Gundam G-Frame S.1 components: Armor Set (01A) with non-articulated frame and armor, and Frame Set (01F) with articulated frame, mini bust, and weapons. Also shows a fully assembled Nu Gundam.

Image: Nu Gundam G-Frame S.1 components. This image displays the individual parts for the Nu Gundam Armor Set (01A) and Frame Set (01F), alongside a fully assembled Nu Gundam figure.

Sazabi G-Frame S.1 components: Armor Set (02A) with non-articulated frame and armor, and Frame Set (02F) with articulated frame, mini bust, and weapons. Also shows a fully assembled Sazabi.

Image: Sazabi G-Frame S.1 components. This image displays the individual parts for the Sazabi Armor Set (02A) and Frame Set (02F), alongside a fully assembled Sazabi figure.

Unicorn Gundam (Destroy Mode) G-Frame S.1 components: Armor Set (03A) with non-articulated frame and armor, and Frame Set (03F) with articulated frame, mini bust, and weapons. Also shows a fully assembled Unicorn Gundam.

Image: Unicorn Gundam (Destroy Mode) G-Frame S.1 components. This image displays the individual parts for the Unicorn Gundam (Destroy Mode) Armor Set (03A) and Frame Set (03F), alongside a fully assembled Unicorn Gundam figure.

Operating and Display

The MS GUNDAM G-FRAME S.1 figures offer versatility in display options:

Articulated Display: When using the articulated frame from SET B, you can pose your Mobile Suit in various dynamic stances. Gently manipulate the joints to achieve desired positions. Avoid forcing joints beyond their natural range of motion.
Static Display: The non-articulated frame from SET A provides a stable base for a fixed, upright display of your Mobile Suit. This is ideal for showcasing the model's design without concern for posing.

Assembled Sazabi and Nu Gundam G-Frame S.1 figures in dynamic action poses, showcasing their articulation and weaponry.

Image: Assembled Sazabi and Nu Gundam figures in dynamic poses. This demonstrates the range of motion and display possibilities when using the articulated frames.

Assembled Unicorn Gundam (Destroy Mode) G-Frame S.1 figure in a dynamic action pose, holding its rifle.

Image: Assembled Unicorn Gundam (Destroy Mode) figure in a dynamic pose. This highlights the articulation and ability to hold accessories.

Maintenance

To ensure the longevity and appearance of your GUNDAM G-FRAME S.1 figures, follow these maintenance guidelines:

Cleaning: Dust figures regularly with a soft, dry brush or a microfiber cloth. For stubborn dirt, lightly dampen a cloth with water (no harsh chemicals) and gently wipe the surface. Ensure figures are completely dry before storing.
Storage: Store figures away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation. Keep them in a dust-free environment.
Handling: Always handle figures by their main body parts. Avoid gripping small, delicate accessories or thin antenna-like parts to prevent breakage.

Troubleshooting

Here are solutions to common issues you might encounter:

Parts Not Fitting: If a part does not fit easily, do not force it. Check the instruction diagrams to ensure you are attempting to connect the correct parts in the correct orientation. Sometimes, a slight rotation or gentle wiggling can help. If parts are too tight, very carefully and gently widen the peg hole slightly with a hobby knife, or thin the peg with fine sandpaper.
Loose Joints: Over time or with frequent posing, some articulated joints may become loose. To increase friction, you can apply a very small amount of clear nail polish or clear hobby cement to the ball joint or peg, allow it to dry partially (until tacky), and then reassemble. Test the joint's movement carefully.
Broken Parts: In case of a broken part, use plastic cement specifically designed for model kits to reattach. For small, critical joints, consider reinforcing with a small pin if possible.

Specifications

Product Dimensions	4 x 2.6 x 2.26 cm
Item Weight	630 grams
Manufacturer Recommended Age	15 years and up
Assembly Required	No (Figures come pre-assembled in their respective sets, but combining sets requires assembly)
Batteries Required	No
Manufacturer Reference	59727
ASIN	B07646Y4KW
First Available Date	October 10, 2017

Warranty Information

BANDAI products are manufactured to high-quality standards. For specific warranty details regarding your MS GUNDAM G-FRAME S.1 figures, please refer to the packaging or contact BANDAI customer support directly. General consumer rights and guarantees apply as per local regulations.

Customer Support

For further assistance, inquiries, or to report any issues with your BANDAI MS GUNDAM G-FRAME S.1 figures, please contact BANDAI customer support through their official website or the contact information provided on the product packaging.

You can also visit the official BANDAI store on Amazon for more information: BANDAI Store

	HG 1/144 RX-0 Unicorn Destruction Mode Model Kit Assembly Instructions Comprehensive assembly guide for the HG 1/144 RX-0 Unicorn Destruction Mode model kit, detailing part identification, step-by-step construction, and color recommendations.
	RG Unicorn Gundam LED Mod: A Step-by-Step Lighting Tutorial Learn how to add custom LED lighting to your Bandai Real Grade (RG) 1:144 scale Unicorn Gundam model kit with this comprehensive DIY guide. Covers materials, tools, and detailed instructions for each part of the model.
	Anime Figure Product Manual - Safety and Usage Guide Official product manual for the Anime Figure, detailing product information, manufacturer details, safety warnings, and instructions for use. Includes guidance on handling, care, and storage.
	Anime Figure Product Manual - Information, Safety, and Usage Official product manual for the Bandai collectible Anime Figure. This document provides detailed product information, manufacturer and EU representative contacts, essential safety warnings including choking hazard alerts, and clear instructions for use, care, and storage. Suitable for collectors and as a gift.
	Bandai Dimension Xenofigure TEGASWORD RED Instruction Manual & Assembly Guide Official instruction manual for the Bandai Dimension Xenofigure TEGASWORD RED. Learn how to assemble, replace batteries, swap hands, and activate light-up features for your action figure.
	DX Ryoutegurd (DXリョウテガリード) Instruction Manual and Play Guide \| Bandai Super Sentai Official instruction manual for the Bandai DX Ryoutegurd (DXリョウテガリード) toy from the Super Sentai series. Learn how to assemble, play, combine with other toys, and activate special moves. Includes safety warnings and part identification.

BANDAI G-FRAME S.1