Kobalt KHB 4024A-03

Kobalt 24-Volt Max Lithium Ion 410-CFM Brushless Cordless Electric Leaf Blower User Manual

Brand: Kobalt

Model: KHB 4024A-03

Introduction

The Kobalt 24-Volt Max Lithium Ion 410-CFM Brushless Cordless Electric Leaf Blower is designed for efficient leaf and debris removal in outdoor spaces. Its brushless motor provides extended runtime and motor life, while the turbine fan delivers powerful airflow. The lightweight and ergonomic design ensures user comfort during operation. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your leaf blower.

This kit includes the leaf blower unit, a blower tube, one 4.0Ah 24-volt max battery, and a standard 45W charger. A rapid 110W charger is sold separately (item #672833). The included battery and charger are compatible with all Kobalt's 24-volt max tools.

Product Overview

Kobalt 24-Volt Max Lithium Ion 410-CFM Brushless Cordless Electric Leaf Blower with battery and charger

This image shows the Kobalt 24-Volt Max Lithium Ion 410-CFM Brushless Cordless Electric Leaf Blower, along with its accompanying 24V 4.0Ah battery and charger. The blower features a blue and black design with a long black blower tube attached to the main unit. The battery is inserted into the base of the handle, and the charger is a separate blue unit with a power cord.

Key Features:

Components Included

Your Kobalt 24-Volt Max Lithium Ion Leaf Blower package includes the following:

Setup

1. Charging the Battery

  1. Ensure the charger is connected to a standard electrical outlet (120V AC, 60Hz).
  2. Slide the 24-Volt Max Lithium Ion battery into the charger until it clicks into place.
  3. Allow the battery to charge fully. The indicator lights on the battery will show the charge status. A full charge typically takes approximately 50 minutes with the included 4.0Ah battery.
  4. Once fully charged, remove the battery from the charger.

2. Attaching the Blower Tube

  1. Align the blower tube with the air outlet on the main blower unit.
  2. Push the tube firmly onto the outlet and twist clockwise until it locks securely into position. Ensure it is fully seated to prevent it from detaching during operation.

3. Installing the Battery

  1. With the blower unit upright, align the charged battery with the battery port at the base of the handle.
  2. Slide the battery into the port until it clicks securely into place. Ensure it is fully seated and locked to prevent accidental dislodgement.

Operating Instructions

1. Starting and Stopping the Blower

2. Using Variable Speed and Cruise Control

3. General Usage Tips

Maintenance

1. Cleaning

2. Battery Care and Storage

3. General Storage

Troubleshooting

ProblemPossible CauseSolution
Blower does not start.Battery not installed correctly or not charged.Ensure battery is fully inserted and clicked into place. Check battery charge level and recharge if necessary.
Reduced airflow or power.Battery low on charge; air intake/exhaust blocked.Recharge battery. Clear any debris from the air intake or blower tube.
Blower stops unexpectedly.Overheating; battery depleted.Allow blower to cool down. Recharge battery. Ensure vents are clear.

If you encounter issues not listed here or if the problem persists after attempting the solutions, please contact Kobalt customer support.

Specifications

SpecificationValue
BrandKobalt
Model NumberKHB 4024A-03
Battery Voltage24-Volt Max
Battery TypeLithium Ion (Li-ion)
Air Flow CapacityUp to 410 CFM
Air SpeedUp to 100 MPH
Item Weight4.4 lbs
Power SourceBattery Powered
Brushless MotorYes
Variable SpeedYes
Safe for Indoor UseNo

Warranty and Support

For detailed warranty information, please refer to the warranty card included with your product or visit the official Kobalt website. Keep your purchase receipt as proof of purchase for warranty claims.

If you require technical assistance, replacement parts, or have questions regarding your Kobalt 24-Volt Max Lithium Ion Leaf Blower, please contact Kobalt customer support through their official channels. Contact information can typically be found on the product packaging or the manufacturer's website.