HYPERLITE UFO LED High Bay Light 150W Instruction Manual

1. Introduction

Thank you for choosing the HYPERLITE UFO LED High Bay Light 150W. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read all instructions carefully before use and retain this manual for future reference.

Figure 1: HYPERLITE UFO LED High Bay Light 150W highlighting its 150W power, 5000K color temperature, 145 lm/W efficiency, 1-10V dimming, 120-277V input, and UL certification.

This 150W LED high bay light delivers 21,750 lumens with an efficiency of up to 145 lumens per watt, providing bright and clear illumination. It features a durable aluminum construction, IP65 waterproof and dustproof rating, and 1-10V dimmable functionality. Designed for commercial and industrial applications, it offers a long lifespan and easy installation.

2. What's in the Box

Verify that all components are present and undamaged upon unpacking:

• 150W 5000K UFO High Bay Light
• 5' Cable with 110V Plug
• Hanging Hook
• Safety Rope

Figure 2: Included components: 150W UFO High Bay Light, 5' cable with 110V plug, hanging hook, and safety rope.

3. Safety Information

• Always disconnect power before installation, maintenance, or cleaning.
• Ensure the power supply voltage matches the fixture's requirements (100-277V AC).
• Installation should be performed by a qualified electrician in accordance with local electrical codes.
• Do not operate the fixture if it is damaged.
• Avoid direct eye exposure to the light source when illuminated.
• Use the provided safety rope to secure the fixture during installation to prevent accidental drops.
• Ensure the mounting structure can support the weight of the fixture.

4. Setup and Installation

The HYPERLITE UFO LED High Bay Light is designed for quick and easy installation, typically within 3 minutes, using the included American hook and 5-foot power cord with a 110V plug.

1. Prepare Mounting Location: Identify a sturdy overhead structure (e.g., beam, truss) capable of supporting the fixture's weight. Ensure there is a suitable power outlet nearby.
2. Attach Hanging Hook: Securely screw the provided hanging hook into the designated threaded hole on top of the fixture.
3. Connect Safety Rope: Attach one end of the safety rope to the fixture and the other end to a separate, secure point on the mounting structure. This provides an additional layer of security.
4. Hang the Fixture: Carefully lift the fixture and hang it from the prepared mounting point using the attached hook.
5. Plug In Power: Connect the 5-foot power cord to a compatible 110V power outlet. For 1-10V dimming functionality, connect the dimming wires (purple and pink/gray) to a compatible 1-10V dimmer switch (sold separately).

Figure 3: The fixture features a 110V standard American plug for direct power supply and dual safety ropes for secure installation.

Figure 4: Exploded view showing the G-Hook, Driver, Aluminum Shell, LED Chips, Seal Ring, and PC Lens, highlighting the robust construction.

5. Operating Instructions

Once installed and powered, the light will illuminate instantly. The fixture is designed to be 1-10V dimmable, allowing for adjustable brightness levels from 10% to 100% when connected to a compatible dimmer switch.

• Standard Operation: Simply plug the fixture into a switched outlet, or connect it to a standard wall switch for on/off control.
• Dimming Functionality: To utilize the 1-10V dimming feature, connect the purple (DIM+) and pink/gray (DIM-) wires from the fixture to a compatible 1-10V dimmer switch. This allows you to adjust the light output to suit your specific needs.

Figure 5: The 1-10V dimmable feature allows for adjustable brightness, saving energy and costs, and providing comfortable lighting.

Figure 6: The 1-10V dimmer wires (purple and pink/gray) enable easy brightness adjustment from 10% to 100% (dimmer sold separately).

6. Maintenance

The HYPERLITE UFO LED High Bay Light requires minimal maintenance due to its durable construction and long-lasting LED technology.

• Cleaning: Periodically clean the exterior of the fixture with a soft, damp cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
• Inspection: Regularly inspect the power cord, hanging hook, and safety rope for any signs of wear or damage. Replace any damaged components immediately.
• Heat Dissipation: Ensure that the cooling fins on the back of the fixture are free from obstructions to maintain optimal heat dissipation and extend the product's lifespan.

Figure 7: Excellent heat dissipation is achieved through die-cast aluminum construction, thickened heat sink, premium driver, and rapid cooling design, extending component life.

7. Troubleshooting

If you encounter issues with your HYPERLITE UFO LED High Bay Light, refer to the following common troubleshooting steps:

• No Light:
  • Check if the power cord is securely plugged into a live outlet.
  • Verify that the power switch (if any) is in the 'ON' position.
  • Inspect the circuit breaker for a tripped breaker.
• Flickering Light:
  • Ensure all electrical connections are secure.
  • If using a dimmer, ensure it is a compatible 1-10V dimmer and properly wired.
• Dimming Issues:
  • Confirm the dimmer switch is a 1-10V compatible model.
  • Check the dimming wire connections (purple and pink/gray) for proper polarity and secure contact.

8. Specifications

9. Warranty and Support

HYPERLITE offers a 5-year service warranty for this product. We are committed to providing high-quality lighting solutions and excellent customer support.

• Warranty Coverage: The 5-year service covers fault issues. If any fault occurs, HYPERLITE will replace the product within 30 days.
• Return Policy: This product is eligible for a refund/replacement within 30 days of purchase.
• Contact Support: For any questions, technical assistance, or warranty claims, please refer to the contact information provided on your purchase receipt or the official HYPERLITE website.