1. Introduction
Thank you for choosing the ABSAAR Automatic Charger Evo 1.0. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your battery charger. Please read this manual thoroughly before using the device and keep it for future reference.
2. Safety Instructions
Always observe the following safety precautions to prevent injury or damage to the charger or battery:
- This charger is designed for 6V and 12V lead-acid batteries (WET, MF, Ca/Ca, AGM, GEL). Do not use it for other battery types.
- Ensure proper ventilation during charging to prevent gas accumulation.
- Avoid sparks or open flames near the battery during charging.
- Wear eye protection and protective clothing when working with batteries.
- Keep out of reach of children.
- Do not expose the charger to rain or excessive moisture.
- Disconnect the AC power before connecting or disconnecting the battery clamps.
- The charger features multiple safety protections including low voltage, overvoltage, overcurrent, short circuit, and overheating protection. However, always operate with caution.
- Do not attempt to charge a frozen or damaged battery.
3. Product Overview
The ABSAAR Automatic Charger Evo 1.0 is an intelligent battery charger designed for ease of use and efficient charging. It features precise processor control for temperature and smart charging, requiring no complex adjustments.
Figure 1: ABSAAR Automatic Charger Evo 1.0. This image shows the compact red and black charger unit with its attached charging cables and clamps.
Key features include:
- Easy to Use: Precise processor-controlled temperature and intelligent charging, no settings required.
- Durable Material: High-quality construction, anti-corrosion and anti-electric shock.
- High Frequency Charging: Ideal for powerful and fast charging.
- Multiple Safety Protections: Low voltage, overvoltage, overcurrent, short circuit, and overheating protection.
4. Setup
- Ensure the charger is disconnected from the AC power outlet.
- Identify the battery terminals: positive (+) and negative (-).
- Connect the red (+) clamp of the charger to the positive (+) terminal of the battery.
- Connect the black (-) clamp of the charger to the negative (-) terminal of the battery. For vehicles, if connecting to the chassis, connect to a heavy gauge metal part of the chassis away from the battery and fuel line.
- Ensure all connections are secure.
5. Operating Instructions
Once the charger is securely connected to the battery:
- Plug the charger's AC power cord into a standard wall outlet (230V AC, 50Hz).
- The charger will automatically detect the battery voltage (6V or 12V) and begin the charging process.
- Monitor the charging indicator lights (if present on your model) to observe the charging status.
- The charger will automatically switch to maintenance mode once the battery is fully charged, preventing overcharging.
- To disconnect, first unplug the charger from the AC power outlet.
- Then, disconnect the black (-) clamp from the battery (or chassis).
- Finally, disconnect the red (+) clamp from the battery.
6. Maintenance
- Keep the charger clean and dry. Wipe with a soft, damp cloth if necessary. Do not use solvents.
- Inspect cables and clamps for damage before each use. Do not use if cables are frayed or clamps are corroded.
- Store the charger in a cool, dry place when not in use.
- Ensure the charger's ventilation openings are clear of obstructions.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not turning on. | No AC power; poor connection to battery; battery voltage too low. | Check wall outlet; ensure clamps are securely connected; battery may be too deeply discharged to be recognized (consult a professional). |
| Charging process is slow. | Battery is large; battery is deeply discharged; ambient temperature is low. | This is normal for large or deeply discharged batteries. Ensure charger is in a suitable environment. |
| Charger gets warm. | Normal operation during charging. | This is normal. Ensure adequate ventilation around the charger. If it becomes excessively hot or emits smoke, disconnect immediately. |
| Error indicator light is on. | Reverse polarity; short circuit; internal fault. | Check battery connections for correct polarity; inspect cables for damage. If problem persists, discontinue use and contact support. |
8. Specifications
| Model Number | 158000 |
| Brand | Absaar |
| Input Voltage | 12 Volts (AC, typically 230V AC for EU market) |
| Output Voltage | 6V / 12V DC (Automatic detection) |
| Output Current | 1 Ampere (1A) |
| Color | Red/Black |
| International Article Code | 04045365118553 |
| Manufacturer | ABSAAR |
| ASIN | B075ZX9F8Q |
Note: Specifications are subject to change without prior notice for product improvement.
9. Warranty and Support
ABSAAR products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official ABSAAR website. In case of technical issues or questions not covered in this manual, please contact ABSAAR customer support or your retailer for assistance.
Please retain your proof of purchase for warranty claims.