Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Style Selections Dunwynn 2.75-in Polished Nickel Mini Seeded Glass Cylinder LED Pendant. Please read this manual thoroughly before beginning installation to ensure safe and proper use of the product. Keep this manual for future reference.
Safety Information
Always follow basic safety precautions when installing or working with electrical fixtures. Failure to do so may result in serious injury or property damage.
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- Ensure all electrical connections comply with local codes, ordinances, and the National Electric Code (NEC).
- If you are unsure about proper electrical wiring, consult a qualified electrician.
- Do not install this fixture in wet or damp locations. This product is designed for indoor use only.
- Handle glass components with care to prevent breakage and injury.
- Do not exceed the specified wattage for any replacement bulbs (though this model uses integrated LED).
What's in the Box
Verify that all components listed below are included in your package:
- Mounting Hardware
- Shade (Seeded Glass Cylinder)
- Bulb (Integrated LED)
- Installation Guide
Image: The Dunwynn Polished Nickel Mini Seeded Glass Cylinder LED Pendant, showcasing its polished nickel base, clear seeded glass cylinder, and hanging cord.
Setup and Installation
This pendant light is designed for semi-flush mount installation and includes all necessary hardware for assembly. Professional installation is recommended if you are not familiar with electrical wiring.
- Turn Off Power: Locate the circuit breaker or fuse box that supplies power to the installation area. Turn off the main power switch to prevent electrical shock.
- Prepare Mounting Surface: Ensure the ceiling junction box is securely mounted and capable of supporting the fixture's weight.
- Install Mounting Bracket: Attach the mounting bracket (included in hardware) to the junction box using the provided screws.
- Adjust Hanging Length: The pendant is fully adjustable to a maximum hanging length of 82.5 inches. Adjust the cord length to your desired height by feeding it through the canopy and securing it.
- Make Electrical Connections: Connect the fixture's wires to the corresponding house wires (black to black, white to white, ground to ground) using wire nuts. Ensure all connections are secure.
- Secure Canopy: Carefully push the canopy up to the ceiling, covering the junction box and mounting bracket. Secure it in place with the provided screws or nuts.
- Install Glass Shade: Attach the seeded glass cylinder shade to the fixture according to the installation guide. Handle with care.
- Restore Power: Once installation is complete and all components are securely in place, restore power at the circuit breaker or fuse box.
Operating Instructions
The Dunwynn LED Pendant is designed for simple operation.
- Power On/Off: This fixture is equipped with a pull chain switch for direct control. Pull the chain to turn the light on or off.
- Light Source: The pendant uses an integrated 7-watt LED light source, providing white light. No traditional bulb replacement is necessary for the LED component.
- Adjustability: The hanging length can be adjusted during installation to suit your space.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your pendant light.
- Cleaning: To clean the fixture, ensure power is off. Wipe the polished nickel finish with a soft, dry cloth. For the glass shade, use a mild glass cleaner applied to a cloth, then wipe the glass. Avoid abrasive cleaners or solvents that may damage the finish.
- LED Longevity: The integrated LED is designed for long-term use and typically does not require replacement. If the LED light fails, the entire fixture may need to be replaced or serviced by a qualified technician.
- Inspections: Periodically check all connections and mounting hardware to ensure they remain secure.
Troubleshooting
If you experience issues with your pendant light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture; loose wiring; faulty pull chain switch. | Check circuit breaker/fuse. Ensure all wire connections are secure. Test the pull chain switch. |
| Light flickers or dims intermittently. | Loose wiring connection; incompatible dimmer switch (if applicable); LED driver issue. | Verify wire connections. Ensure any dimmer switch is compatible with LED fixtures. If issues persist, consult an electrician. |
| Glass shade is loose. | Shade not properly secured. | Carefully re-secure the glass shade according to the installation guide. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Style Selections |
| Model Number | PLL102PNK |
| Product Dimensions | 82.5 x 2.75 x 2.75 inches (Length x Width x Height) |
| Item Weight | 2.5 Pounds |
| Color | Nickel (Polished) |
| Material | Glass, Nickel |
| Style | Contemporary |
| Light Fixture Form | Pendant |
| Room Type | Kitchen (Recommended) |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Installation Type | Semi Flush Mount |
| Special Feature | Adjustable hanging length |
| Control Method | Pull Chain (as per product details, "Touch" is also listed but pull chain is direct control) |
| Light Source Type | LED (Integrated) |
| Finish Type | Polished |
| Shade Material | Glass (Seeded) |
| Number of Light Sources | 1 |
| Voltage | 7 Volts |
| Light Color | White |
| Wattage | 7 watts |
| Bulb Base | GU10 (for the integrated LED module) |
| Assembly Required | Yes |
| Certifications | CSA, UL, ETL |
Warranty and Support
For information regarding warranty coverage, technical support, or replacement parts, please refer to the documentation included with your purchase or visit the official Style Selections website. Keep your proof of purchase for warranty claims.
Official Product Videos
No official product videos from the seller are available for this item at this time.
