Teamson Home VN-L00025-EU

Download PDF
Contents

Versanora VN-L00025-EU Arco LED Floor Lamp User Manual

Model: VN-L00025-EU | Brand: Teamson Home

1. Introduction

Thank you for purchasing the Versanora VN-L00025-EU Arco LED Floor Lamp. This manual provides important information regarding the assembly, operation, maintenance, and troubleshooting of your new lamp. Please read these instructions carefully before use and retain them for future reference.

Important Safety Information

  • Ensure all components are present and undamaged before assembly.
  • Always disconnect the power supply before cleaning or replacing the bulb.
  • This product is designed for indoor use only. Do not expose to water or high humidity.
  • Use only the specified bulb type and wattage to avoid overheating or damage.
  • Keep children and pets away from the lamp during operation and maintenance.

2. Setup and Assembly

Estimated assembly time: 10 minutes. Please follow the step-by-step instructions provided below.

Components Included:

  • Lamp Base
  • Arc Pole (may be in multiple sections)
  • Lamp Shade
  • Power Cord with Touch Switch
  • Assembly Instructions (this manual)

Note: An E26 light bulb is not included and must be purchased separately.

Assembly Steps:

  1. Carefully unpack all components and place them on a clean, flat surface.
  2. Attach the arc pole sections together, ensuring they are securely tightened.
  3. Secure the assembled arc pole to the lamp base. Ensure the base is stable and level.
  4. Attach the lamp shade to the top of the arc pole, ensuring it is firmly in place.
  5. Insert an E26 light bulb (max 60W) into the lamp socket.
  6. Position the lamp in your desired location, ensuring the power cord is not pinched or obstructed.
  7. Plug the power cord into a suitable 220V electrical outlet.
Dimensions of Versanora VN-L00025-EU Arco LED Floor Lamp

Figure 1: Diagram showing the approximate dimensions of the arc floor lamp: 160 cm (60.23 inches) height and 80.01 cm (31.50 inches) depth from the base.

Versanora VN-L00025-EU Arco LED Floor Lamp in a living room setting

Figure 2: The Versanora Arco LED Floor Lamp, rose gold finish, assembled and placed in a living room setting next to an armchair.

3. Operating Instructions

Powering On/Off

The lamp is equipped with a touch-sensitive switch located on the power cord. To turn the lamp ON or OFF, simply tap the touch switch. Some models may feature a push-button control on the cord for similar functionality.

Bulb Requirements

  • Bulb Type: E26
  • Maximum Wattage: 60W
  • Bulb Shape Size: A19 (recommended)

Ensure the bulb is securely screwed into the socket before operating the lamp.

Close-up of the Versanora Arco LED Floor Lamp's rose gold shade and bulb socket

Figure 3: A detailed view of the lamp's metallic rose gold shade, revealing the E26 bulb socket inside and the connection point to the arc pole.

4. Maintenance

Cleaning

  • Always unplug the lamp from the power outlet before cleaning.
  • Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
  • Avoid spraying cleaners directly onto the lamp.

Bulb Replacement

  • Ensure the lamp is unplugged and the bulb has cooled down completely before attempting to replace it.
  • Carefully unscrew the old bulb counter-clockwise.
  • Screw in a new E26 bulb (max 60W) clockwise until snug. Do not overtighten.

5. Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn on.1. Lamp is not plugged in.
2. Power outlet is not working.
3. Bulb is loose or faulty.
4. Switch is faulty.
1. Ensure the power cord is securely plugged into an active outlet.
2. Test the outlet with another appliance.
3. Tighten or replace the E26 bulb.
4. Contact customer support if the switch is suspected to be faulty.
Light flickers.1. Loose bulb.
2. Incompatible bulb.
3. Unstable power supply.
1. Tighten the bulb.
2. Ensure the bulb is E26 type and within 60W.
3. Try plugging the lamp into a different outlet.
Lamp is unstable.1. Base not properly assembled.
2. Uneven surface.
1. Re-check assembly steps, ensuring all connections are tight.
2. Place the lamp on a flat, stable surface.

6. Product Specifications

FeatureSpecification
Model NumberVN-L00025-EU
BrandTeamson Home (Versanora)
Product Dimensions (D x W x H)88D x 25W x 160H cm
Item Weight5.94 Kilograms
MaterialMetal, PVC, Copper, Plastic
Base MaterialMetal
Shade MaterialMetal
ColorRose Gold
Finish TypeMatte
StyleModern, Arc
Lamp Base / Bulb SocketE26
Number of Bulbs1
Maximum Wattage60 Watts
Voltage220 Volts
Power Supply TypeCorded Electric
Switch TypeTouch Switch / Push Button
Light DirectionVariable
Mounting TypeFloor Mount / Freestanding
Indoor/Outdoor UseIndoor Use Only
Water ResistanceNot Waterproof
UPC816780024057

7. Warranty Information

This product comes with a 30-day warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Please retain your proof of purchase for any warranty claims.

8. Customer Support

For further assistance, questions, or to report any issues with your Versanora Arco LED Floor Lamp, please contact Teamson Home customer service.

You can visit the official Teamson Home store for more information and contact options: Teamson Home Store

Please have your model number (VN-L00025-EU) and proof of purchase ready when contacting support.

© 2023 Teamson Home. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.