Triomph TRSC19

Triomph Smart Digital Body Weight Bathroom Scale User Manual

Model: TRSC19

Introduction

Thank you for choosing the Triomph Smart Digital Body Weight Bathroom Scale. This scale is designed to provide accurate weight measurements with ease of use and a sleek, modern design. It features a backlit display for clear readings and a durable tempered glass platform. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Triomph Smart Digital Body Weight Bathroom Scale

Figure 1: Triomph Smart Digital Body Weight Bathroom Scale (Black)

This image shows the sleek black design of the Triomph Smart Digital Body Weight Bathroom Scale with its clear digital display showing a weight reading. Two AAA batteries are visible next to the scale, indicating they are included.

Setup

1. Battery Installation

The Triomph scale requires 2 AAA batteries for operation. These batteries are included with your purchase.

  1. Locate the battery compartment on the underside of the scale.
  2. Open the battery compartment cover.
  3. Insert the 2 AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery compartment cover securely.

To install batteries, turn the scale over. The battery compartment is typically located on the back. Open the cover, insert the two AAA batteries according to the polarity markings, and then close the cover. This process is essential for the scale's power.

2. Scale Placement

For the most accurate readings, place the scale on a hard, flat, and stable surface. Uneven or soft surfaces (like carpet) can affect accuracy.

Scale placed on a hard, flat surface

Figure 2: Proper placement of the scale on a hard, flat surface.

This image illustrates the Triomph scale positioned on a tiled floor, emphasizing the importance of a hard and flat surface for accurate measurements. A close-up inset shows the non-skidding latex pads on the bottom of the scale.

Operating Instructions

1. Taking a Measurement

The Triomph scale features Smart Step-On Technology for instant readings.

  1. Gently step onto the center of the scale with bare feet.
  2. Stand still until your weight appears on the LCD display.
  3. The scale will automatically turn off after a few seconds of inactivity.
Foot stepping onto the scaleFeet on scale showing weight reading

Figure 3: Stepping onto the scale and viewing the weight reading.

These images demonstrate the process of using the scale: one image shows a foot initiating contact with the scale, and the other shows both feet positioned on the scale with a clear weight reading displayed on the LCD screen.

2. Changing Weight Units

The scale supports three unit modes: kilograms (kg), pounds (lb), and stone-pounds (st:lb).

  • Turn the scale over to access the underside.
  • Locate the "UNIT" button near the battery compartment.
  • Press the "UNIT" button to cycle through the available weight units until your desired unit is displayed.

Maintenance

  • Clean the scale surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
  • Do not immerse the scale in water or any other liquid.
  • Store the scale in a dry place, away from extreme temperatures and humidity.
  • If the scale will not be used for an extended period, it is recommended to remove the batteries to prevent leakage.

Troubleshooting

ProblemPossible CauseSolution
"Lo" or Low Battery IndicatorBatteries are low.Replace the 2 AAA batteries.
"ERR" or Overload IndicatorWeight exceeds the maximum capacity (400 lbs / 180 kg).Step off the scale. The scale is designed for weights up to 400 lbs (180 kg).
Inaccurate or inconsistent readingsScale is on an uneven or soft surface; scale needs re-calibration.Place the scale on a hard, flat surface. If issues persist, step on and off the scale quickly to allow it to auto-calibrate to zero before taking a measurement.
No display when stepping onBatteries are not installed or are completely drained.Ensure batteries are correctly installed or replace them.

Specifications

  • Model: TRSC19
  • Capacity: 400 lbs / 180 kg
  • Accuracy: 0.2 lb / 0.1 kg
  • Units: kg, lb, st:lb
  • Display: Backlit LCD
  • Power: 2 x AAA Batteries (included)
  • Platform Material: Tempered Glass (6mm)
  • Dimensions: 11.8 x 10.2 x 0.7 inches
  • Special Features: Smart Step-On Technology, Auto-Zero, Auto-On, Auto-Off, Low Battery Indication, Overload Indication, Non-slip feet.
Scale dimensions and capacity

Figure 4: Key specifications including dimensions and maximum capacity.

This image visually presents the dimensions of the Triomph scale (11.8 inches by 10.2 inches by 0.7 inches) and highlights its maximum weight capacity of 400 lbs.

Scale features and sensors

Figure 5: Overview of high-precision sensors and key features.

This image details the scale's features, including its four high-precision sensors, auto on/off, low battery indicator, auto calibrate function, overload indicator, 6mm tempered glass, and the requirement for 2 AAA batteries. It also reiterates the maximum capacity of 400 lbs / 180 KGS.

Warranty and Support

Triomph stands by its products with a 1-Year Warranty and 30-day money-back service. We are committed to ensuring a happy purchasing experience and will happily send a product replacement if any issues arise.

For lifetime support or warranty claims, please contact Triomph customer service through the retailer's platform or visit the official Triomph website for contact information.

© 2024 Triomph. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.