VONLUCE HCF-1303-BN

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

VONLUCE Semi Flush Mount Ceiling Light Instruction Manual

Model: HCF-1303-BN

Brand: VONLUCE

Introduction

Thank you for choosing the VONLUCE Semi Flush Mount Ceiling Light. This modern drum light fixture is designed to enhance the ambiance of your living spaces with its elegant design and gentle illumination. Please read this manual carefully before installation and use to ensure proper operation and safety.

Safety Information

  • Always turn off the power at the main circuit breaker before beginning installation.
  • Consult a qualified electrician if you are unsure about the installation process.
  • Ensure all electrical connections are secure and comply with local codes and ordinances.
  • Do not exceed the maximum wattage specified for the light bulbs (60W per bulb).
  • Handle glass components and bulbs with care to prevent breakage.
  • Keep flammable materials away from the light fixture.

Package Contents

Verify that all parts are present before beginning assembly:

  • 1x Drum Light Fixture (with fabric shade, metal canopy, and 3-light structure)
  • 1x Diffused Shaped Plate
  • Mounting Hardware (screws, wire nuts, etc.)
  • 1x Instruction Manual
Components of the VONLUCE Semi Flush Mount Ceiling Light

Image: Overview of the light fixture components, including the white linen drum shade, brushed nickel canopy, and 3-light structure.

Setup & Installation

Follow these steps for safe and proper installation:

  1. Prepare for Installation: Turn off power at the circuit breaker. Ensure the mounting surface is clean and clear.
  2. Attach Mounting Bracket: Secure the mounting bracket to the electrical box in the ceiling using the provided screws.
  3. Wire Connections: Connect the fixture's wires to the household electrical wires according to standard wiring practices (black to black, white to white, ground to ground). Use wire nuts to secure connections.
  4. Secure Canopy: Carefully push the fixture's canopy up against the ceiling, aligning the mounting holes with the screws on the mounting bracket. Secure with decorative nuts.
  5. Install Diffuser Plate: Place the diffused shaped plate inside the drum shade, resting it on the internal supports.
  6. Insert Light Bulbs: Screw in three E26 base light bulbs (not included) into the sockets. Ensure bulbs do not exceed 60W each.
  7. Restore Power: Turn on the power at the main circuit breaker.

Video: A step-by-step guide on how to install the VONLUCE 18-inch drum ceiling light, demonstrating the assembly and mounting process.

Dimensions and bulb compatibility for VONLUCE light fixture

Image: Detailed dimensions of the light fixture (18" x 11.4" x 7.9") and compatibility with E26 sockets, 60W max wattage, and dimmer compatibility. Bulbs are not included.

Operating Instructions

This light fixture operates via a standard wall switch. If dimmable bulbs and a compatible dimmer switch are installed, you can adjust the light intensity to your preference.

VONLUCE light fixture in a bedroom and living room, showing on and off states

Image: The light fixture shown in both an 'ON' state in a bedroom and an 'OFF' state in a living room, illustrating its appearance in different lighting conditions.

Maintenance

  • Cleaning: To clean the fixture, turn off the power and wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Bulb Replacement: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before touching. Replace with E26 base bulbs, not exceeding 60W.

Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.Power is off; loose wiring; faulty bulb.Check circuit breaker; ensure connections are secure; replace bulb.
Light flickers.Loose bulb; incompatible dimmer; loose wiring.Tighten bulb; ensure dimmer compatibility; check wiring connections.
Fixture is hot to touch.Bulb wattage too high.Replace with lower wattage bulbs (max 60W).

Specifications

FeatureDetail
BrandVONLUCE
Model NumberHCF-1303-BN
Dimensions18"L x 18"W x 6"H
MaterialMetal, Linen
ColorBrushed Nickel (fixture), Off-white (shade)
Bulb BaseE26
Max Wattage60W per bulb
Number of Light Sources3
Voltage110 Volts
Special FeatureDimmable (with compatible bulbs/switch)
Installation TypeSemi Flush Mount

Warranty & Support

VONLUCE products are designed for durability and performance. For any questions, technical support, or warranty claims, please contact VONLUCE customer service through the retailer's platform or the official VONLUCE website. Please retain your proof of purchase for warranty purposes.

Visit the official VONLUCE Store for more information: VONLUCE Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.