Skywin VR Charging Stand for PS4 & Controller Instruction Manual

Introduction

Thank you for purchasing the Skywin VR Charging Stand. This multifunctional stand is designed to organize, display, and charge your PlayStation 4 console, PSVR headset, PS4 DualShock controllers, and PS Move controllers. Please read this manual carefully to ensure proper setup and operation.

Package Contents

Please verify that all items listed below are included in your package:

• 1 x Charging Stand Base
• 1 x PS VR Headset Stand/Support
• LED charge indicators for each individual Move and Dualshock controller
• Required charging adapters/dongles for controllers (as specified on packaging)

Setup Instructions

Follow these steps to assemble and set up your Skywin VR Charging Stand:

1. Unpack Components: Carefully remove all components from the packaging.
2. Assemble the Stand: Attach the PS VR headset stand/support to the main charging stand base. Ensure it is securely fitted into the designated slot.
3. Connect Power: Connect the power cable to the charging stand and plug it into a suitable power source.
4. Place PS4 Console: Position your PlayStation 4 console vertically in the designated slot on the stand. The stand is designed to securely hold the console.
5. Organize Cables: Route any necessary console or headset cables neatly to maintain a clutter-free setup.

Image: Fully assembled Skywin VR Charging Stand with a PlayStation 4 console, PSVR headset, two PS Move controllers, and two PS4 DualShock controllers in place.

Image: Diagram showing the dimensions of the Skywin VR Charging Stand: 14.4 inches height, 14.7 inches length, and 8.5 inches width.

Operating Instructions

This section details how to use your charging stand effectively.

Charging Controllers

• PS4 DualShock Controllers: Insert the small charging dongles (if provided) into the micro USB port of your PS4 DualShock controllers. Then, simply place the controllers into the designated charging slots on the stand. The LED indicator for each controller will illuminate to show charging status.
• PS Move Controllers: Place your PS Move controllers directly into their dedicated charging ports on the stand. The LED indicator will show their charging status.
• Charging Status Indicators: The stand features individual LED indicators for each controller slot. These lights will change color (e.g., red for charging, green/blue for fully charged) to provide instant visual feedback on the charging progress.

Organizing Your VR Setup

• PSVR Headset: Place your PSVR headset on the top support of the stand. This keeps it safely stored and displayed.
• Cable Management: Utilize the stand's design to wrap and secure headset cables and other wires, ensuring a tidy and organized gaming area.

Image: The charging stand displaying a PSVR headset, two PS Move controllers, and two PS4 DualShock controllers, all neatly organized and charging.

Image: A view of the charging stand's base, highlighting the multiple USB ports available for additional accessories or charging.

Maintenance

To ensure the longevity and optimal performance of your Skywin VR Charging Stand, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe down the stand regularly. Avoid abrasive cleaners or solvents that may damage the surface.
• Dust Removal: Periodically use compressed air to clear dust from charging ports and ventilation areas.
• Cable Care: Ensure all cables are not kinked or excessively bent to prevent damage.

Troubleshooting

If you encounter any issues with your charging stand, refer to the following common problems and solutions:

• Controllers Not Charging:
  • Ensure the power cable is securely connected to both the stand and the power outlet.
  • Verify that the charging dongles (for DualShock controllers) are fully inserted into the controllers.
  • Check if the controllers are correctly seated in their respective charging slots.
  • Try charging a different controller to determine if the issue is with the stand or a specific controller.
• LED Indicators Not Working:
  • Confirm the stand is receiving power.
  • If only one indicator is not working, the LED itself might be faulty, but charging may still occur.
• Stand Feels Unstable:
  • Ensure the stand is placed on a flat, stable surface.
  • Verify that all assembled parts are securely connected.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Skywin website. Keep your purchase receipt as proof of purchase for any warranty claims.