BAKAJI Digital Electronic Wall Safe 31x20x20cm User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your BAKAJI Digital Electronic Wall Safe. This elegant and compact digital wall safe is designed to securely store your valuables and important items, offering maximum security with ease of use. It can be opened by entering a freely chosen numerical code or with an emergency key. It is ideal for both private use and for hotels and various accommodation facilities, thanks to the ability to set new combinations with its innovative digital system.

Safety Information

• Keep emergency keys in a secure location, separate from the safe and away from the digital keypad.
• Do not store the emergency keys inside the safe.
• Ensure the safe is securely mounted to prevent unauthorized removal.
• Replace batteries promptly when the low battery indicator appears to avoid being locked out.
• Avoid exposing the safe to extreme temperatures or humidity.

Package Contents

Please check the package to ensure all items are present:

• 1 x BAKAJI Digital Electronic Wall Safe
• 2 x Emergency Keys
• 2 x Mounting Bolts
• 4 x AA Batteries
• User Manual (this document)

Product Overview

The BAKAJI Digital Electronic Wall Safe is constructed from durable iron with a protective anti-corrosion paint finish. Its compact design allows for discreet installation.

Figure 1: Front view of the safe, showing the digital keypad and emergency keyhole.

Figure 2: Dimensions of the safe (31 cm x 20 cm x 20 cm).

Figure 3: Interior view of the safe when open.

Figure 4: Inside the safe door, revealing the battery compartment.

Setup

1. Initial Opening and Battery Installation

1. Locate the emergency keyhole, usually hidden behind a small cover on the keypad panel.
2. Insert one of the provided emergency keys into the keyhole and turn it clockwise.
3. While holding the key turned, rotate the knob on the keypad counter-clockwise to open the safe door.
4. Open the safe door. Inside the door, locate the battery compartment.
5. Open the battery compartment cover and insert 4 AA batteries, ensuring correct polarity (+/-).
6. Close the battery compartment cover.
7. Close the safe door and turn the knob clockwise to lock it. Remove the emergency key and store it in a safe place outside the safe.

2. Mounting the Safe

The safe is designed for wall mounting to enhance security. It comes with two mounting bolts.

1. Choose a suitable location for mounting, preferably a solid wall or a secure, hidden spot.
2. Mark the drilling points on the wall using the pre-drilled holes on the back of the safe as a template.
3. Drill holes at the marked points.
4. Align the safe with the drilled holes and insert the mounting bolts.
5. Tighten the bolts securely to fix the safe firmly to the wall.

Figure 5: Back of the safe with mounting holes and included bolts.

Operating Instructions

1. Setting Your Personal Code

1. With the safe door open, press the red reset button located on the inside of the door, near the hinge. You will hear a beep and the yellow light on the keypad will illuminate.
2. Enter your new personal code (3-8 digits) on the keypad.
3. Press the "E" or "#" button to confirm. The yellow light will turn off, indicating the code has been successfully set.
4. Test your new code with the door open before closing it.

2. Opening the Safe with Your Code

1. Enter your personal code on the keypad.
2. Press the "E" or "#" button to confirm. The green light will illuminate.
3. Within 5 seconds, turn the knob clockwise to open the safe door.

3. Locking the Safe

1. Close the safe door.
2. Turn the knob counter-clockwise to engage the locking bolts. The safe is now locked.

4. Emergency Opening

In case you forget your code or the batteries run out, you can use the emergency key:

1. Locate the emergency keyhole (behind the cover on the keypad).
2. Insert the emergency key and turn it clockwise.
3. While holding the key turned, rotate the knob counter-clockwise to open the safe door.

Maintenance

• Battery Replacement: When the low battery indicator lights up, replace all 4 AA batteries immediately. Use high-quality alkaline batteries for optimal performance.
• Cleaning: Clean the exterior of the safe with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• Keypad Care: Keep the keypad clean and dry. Avoid pressing buttons with excessive force.
• Lubrication: Periodically check the locking mechanism and hinges for smooth operation. If necessary, apply a small amount of lubricant (e.g., silicone spray) to ensure smooth movement.

Troubleshooting

Specifications

Warranty Information

No specific warranty information was provided in the product details. Please refer to your purchase documentation or contact the retailer for warranty details.

Support

For further assistance or inquiries, please contact BAKAJI customer support or the retailer from whom you purchased the product. No specific contact information was provided in the product details.