1. Introduction
Thank you for purchasing the TBTeek Model L01 Battery-Operated COB LED Closet Light. This manual provides essential information for the safe and efficient use of your new lights. Please read it thoroughly before installation and operation, and retain it for future reference.
2. Product Overview
2.1 Key Features
- Bright Illumination: Each light features a high-quality COB LED strip, providing 200 lumens of bright, wide-angle light.
- Battery Operated: Requires 3x 1.5V AAA batteries (not included), offering cordless convenience and safety for various locations.
- Easy Installation: Multiple mounting options including adhesive pads, built-in magnets, and a hanging hole for screws.
- Simple Operation: A single push-button switch controls power, allowing for easy on/off functionality.
- Versatile Use: Ideal for closets, cabinets, sheds, attics, utility rooms, under-cabinet lighting, night reading, camping, and emergency situations.
2.2 What's in the Box
- 4 x TBTeek Model L01 Closet Lights
- 1 x Set of Adhesive Screw Pads
- 1 x Instruction Manual
Image: Product dimensions and key specifications.
Image: Detailed view of the light's components and various mounting options.
3. Setup
3.1 Battery Installation
- Locate the battery compartment cover on the back of the light.
- Slide the cover open.
- Insert 3 AAA batteries (not included) into the compartment, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Video: Demonstrates the installation of 3 AAA batteries into the light unit.
Image: Close-up of the battery compartment, showing where to insert AAA batteries.
3.2 Mounting Options
The TBTeek Closet Light offers flexible mounting solutions:
- Adhesive Pads: For smooth surfaces, peel off the protective film from the adhesive screw pad and firmly press it onto the desired location. Then, hang the light onto the screw.
- Magnets: The light has built-in magnets, allowing it to stick directly to any metal surface.
- Screw Hanging: Utilize the hanging hole on the back of the light to mount it on a screw (screw not included) for a more permanent fixture.
Video: Demonstrates attaching and detaching the light from a wall mount using the hanging mechanism.
Image: Rear view of the light, highlighting the magnets and hanging hole for installation.
4. Operation
To operate the TBTeek Closet Light, simply press the large push-button switch located on the front of the unit. Press once to turn the light ON, and press again to turn it OFF. The light provides instant illumination.
Video: Demonstrates the simple push-button operation to turn the light on and off.
Image: A hand demonstrating the push-button switch to activate the light.
5. Maintenance
- Battery Replacement: Replace all 3 AAA batteries when the light dims significantly or stops working. Always use fresh batteries of the same type.
- Cleaning: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
- Storage: If storing the lights for an extended period, remove the batteries to prevent leakage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Batteries are dead or incorrectly installed. | Replace batteries with new ones, ensuring correct polarity. |
| Light is dim. | Batteries are low. | Replace batteries with new ones. |
| Light falls off surface. | Adhesive is worn or surface is unsuitable; magnets not strong enough for surface. | Reapply new adhesive, ensure surface is clean and dry. For metal surfaces, ensure strong magnetic contact or use screw mounting. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | TBTeek |
| Model Name | L01 (Closet Light Battery Operated) |
| Light Source Type | COB LED Lamp |
| Light Output Maximum | 200 Lumens |
| Wattage | 3 Watts |
| Power Source | 3x AAA Battery (Not included) |
| Battery Life | Approximately 3.5 Hours (continuous use) |
| Switch Type | Push Button |
| Mounting Type | Adhesive, Magnets, Screw Hanging |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Product Dimensions | 1.3"D x 3.3"W x 3.3"H |
| Item Weight | 8.5 ounces (for 4 lights) |
| Color | White |
| Is Waterproof | False |
8. Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official TBTeek website. Keep your purchase receipt as proof of purchase.