Sound Town METIS-10M 10-inch Passive Stage Monitor Speaker User Manual

Introduction

Thank you for choosing the Sound Town METIS-10M passive stage monitor speaker. This manual provides essential information for the safe and efficient operation of your new speaker. Please read it thoroughly before use and retain it for future reference.

Safety Instructions

• Power: This is a passive speaker and requires an external amplifier. Ensure the amplifier's power output matches the speaker's power handling capabilities to prevent damage.
• Connections: Always use high-quality speaker cables with appropriate connectors (Speakon or 1/4" TS) for secure and reliable connections.
• Placement: Position the speaker on a stable, level surface. Avoid placing it near heat sources, in direct sunlight, or in areas with excessive moisture.
• Ventilation: Ensure adequate airflow around the speaker. Do not block ventilation openings.
• Cleaning: Disconnect from power before cleaning. Use a dry, soft cloth. Avoid liquid cleaners.
• Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
• Hearing Protection: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use appropriate hearing protection when operating at high volumes.

Package Contents

The Sound Town METIS-10M package includes:

• 1 x Sound Town METIS-10M Passive Stage Monitor Speaker

Note: Speaker cables are not included and must be purchased separately.

Product Overview

The Sound Town METIS-10M is a 10-inch passive stage monitor speaker designed for clear and powerful sound reproduction in live sound environments. It features a robust construction and versatile connectivity.

Figure 1: Front view of the Sound Town METIS-10M speaker, showcasing the protective metal grille and Sound Town logo.

Figure 2: Angled view of the METIS-10M speaker, highlighting its wedge shape suitable for stage monitoring.

Key Features:

• Professional Passive Floor Monitor: 150W RMS / 300W Peak (8-Ohm) power handling.
• Dual High-Quality Drivers: Equipped with a 10" woofer and a 1" compression tweeter for exceptional sound clarity.
• Seamless Daisy Chaining: Features parallel 1/4" jacks and a Speakon connector for easy connection to other speakers or an amplifier.
• Durable Design: Constructed with a black carpet finish, metal grille, and metal corners for enhanced durability during transport and use.
• Portability: Includes side recessed handles for convenient transportation.

Figure 3: Rear input panel showing the two 1/4" jacks and the Speakon connector for versatile connectivity.

Figure 4: The speaker being carried, demonstrating its portable design with recessed side handles.

Figure 5: Illustration of the speaker's protective features, including metal corners, a heavy-duty metal grille, and durable black carpeting.

Setup

Follow these steps to set up your METIS-10M speaker:

1. Placement: Position the monitor speaker on the stage floor, angled towards the performer or desired listening area. Ensure it is stable and not obstructing any pathways.
2. Connect to Amplifier: Using a high-quality speaker cable, connect one end to an output on your power amplifier.
3. Connect to Speaker: Connect the other end of the speaker cable to either the Speakon input or one of the 1/4" TS inputs on the rear panel of the METIS-10M speaker.
4. Daisy Chaining (Optional): If connecting multiple passive speakers, use another speaker cable to connect from the second 1/4" TS input/output on the first METIS-10M to the input of the next passive speaker. Ensure your amplifier can handle the combined impedance.
5. Power On: Once all connections are secure, power on your amplifier. Start with the amplifier's volume at its lowest setting and gradually increase it to the desired level.

Operating Instructions

The METIS-10M is a passive speaker, meaning its operation is primarily controlled by the external amplifier and mixing console. Ensure your amplifier is correctly configured for the speaker's 8-ohm impedance.

• Volume Control: Adjust the overall volume through your amplifier or mixing console. Avoid pushing the amplifier into clipping (distortion) to prevent speaker damage.
• Equalization: Use the EQ controls on your mixing console or amplifier to tailor the sound to your preference and the acoustic environment.
• Feedback Prevention: Position microphones carefully to avoid feedback when using the monitor speaker. Adjust monitor levels as needed.

Maintenance

Proper maintenance will extend the life of your speaker:

• Cleaning: Regularly wipe the exterior with a dry, soft cloth to remove dust and debris. Do not use abrasive cleaners, solvents, or waxes.
• Storage: When not in use, store the speaker in a dry, cool environment, away from extreme temperatures and humidity.
• Inspection: Periodically check speaker cables and connectors for any signs of wear or damage. Replace damaged cables immediately.
• Transport: When transporting, use the recessed side handles and ensure the speaker is secured to prevent movement and impact damage.

Troubleshooting

If you encounter issues with your METIS-10M speaker, refer to the following common problems and solutions:

Specifications

Technical specifications for the Sound Town METIS-10M speaker:

Figure 6: Dimensions of the METIS-10M speaker.

Warranty Information

The Sound Town METIS-10M speaker comes with a 1 Year Limited Warranty. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, abuse, accidents, unauthorized modifications, or improper installation. Please retain your proof of purchase for warranty claims.

Support

For technical assistance, warranty claims, or further information regarding your Sound Town METIS-10M speaker, please visit the official Sound Town store or contact their customer support. You can find more information and products at the Sound Town Store on Amazon.