Important Safety Instructions
Read all instructions before using this fan. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.
- Always unplug the fan before cleaning or servicing.
- Do not operate any fan with a damaged cord or plug.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- This fan is intended for indoor use only. Do not use outdoors.
- Do not immerse fan in water or other liquids.
- Keep children and pets away from the fan during operation.
- Do not insert fingers or foreign objects into any ventilation or exhaust opening.
Product Overview
The Utilitech Pro 20-inch High Velocity Fan is designed to provide powerful air circulation for various indoor environments. Its robust construction and high-efficiency motor ensure effective cooling and ventilation.
Image: Utilitech Pro 20-inch High Velocity Fan, showing its sturdy metal frame, large fan blades, and protective grille.
Key features include:
- 20-inch diameter for wide air distribution.
- 3-speed settings for customized airflow.
- 360-degree vertical tilt for versatile positioning.
- Convenient handle for easy portability.
- Durable plastic blades and metal housing.
Setup and Assembly
The Utilitech Pro 20-inch High Velocity Fan typically comes pre-assembled. Follow these steps for initial setup:
- Unpacking: Carefully remove the fan from its packaging. Retain packaging for future storage or transport.
- Placement: Place the fan on a firm, level surface. Ensure there is adequate space around the fan for proper air circulation and to prevent obstruction of air intake/output.
- Power Connection: Ensure the fan's power switch is in the "OFF" position. Plug the power cord into a standard 120V AC electrical outlet.
Note: Inspect the fan for any damage before first use. If any damage is observed, do not operate the fan and contact customer support.
Operating Instructions
To operate your Utilitech Pro 20-inch High Velocity Fan:
- Power On: Locate the control knob or switch, usually on the back or side of the fan. Turn the knob to the desired speed setting.
- Speed Settings: The fan offers three speed settings:
- Low: For gentle air movement.
- Medium: For moderate air circulation.
- High: For maximum airflow and cooling.
- Adjusting Tilt: The fan head can be tilted 360 degrees vertically. Loosen the adjustment knobs on either side of the fan frame, tilt the fan to the desired angle, and then tighten the knobs securely to lock it in place.
- Power Off: To turn off the fan, turn the control knob or switch to the "OFF" position. Unplug the fan from the outlet when not in use for extended periods.
Maintenance and Care
Regular maintenance ensures optimal performance and extends the life of your fan.
- Cleaning:
- Always unplug the fan before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
- To clean the fan blades, you may need to remove the front grille. Use a vacuum cleaner with a brush attachment or a soft cloth to remove dust from the blades and motor housing.
- Ensure all parts are completely dry before plugging the fan back in.
- Storage: When not in use, store the fan in a cool, dry place. It is recommended to store it in its original packaging to protect it from dust and damage.
- Lubrication: This fan is designed with permanently lubricated bearings and does not require additional lubrication.
Troubleshooting
If you experience issues with your fan, consult the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power to the outlet; Fan not plugged in; Power switch is OFF; Motor overheating. | Check the circuit breaker; Ensure fan is securely plugged in; Turn the power switch to ON; Unplug fan and allow to cool for 30 minutes before restarting. |
| Reduced airflow. | Dust accumulation on blades or grille; Obstruction near fan. | Clean fan blades and grille (refer to Maintenance section); Remove any objects blocking air intake or output. |
| Fan makes unusual noise. | Loose parts; Fan not on a level surface; Debris inside the fan. | Check for loose screws or components; Place fan on a stable, level surface; Unplug fan and inspect for debris, carefully remove if found. |
If the problem persists after trying these solutions, contact customer support.
Specifications
| Brand | Utilitech |
| Model Number | SFD1-500B |
| Fan Type | Floor Fan, High Velocity |
| Diameter | 20 Inches |
| Number of Speeds | 3 |
| Vertical Tilt | 360 Degrees |
| Blade Material | Plastic |
| Indoor/Outdoor Usage | Indoor |
| Item Weight | 11 Pounds |
| Control Method | Touch (Note: Typically a rotary switch for speed control) |
Warranty and Support
While specific warranty details are not provided, most Utilitech products come with a limited manufacturer's warranty covering defects in materials and workmanship. Please refer to the product packaging or the retailer's website for precise warranty terms and conditions.
For technical support, replacement parts, or warranty claims, please contact Utilitech customer service. Keep your purchase receipt and model number (SFD1-500B) readily available when contacting support.
Contact information (example, as not provided):
- Website: www.utilitech.com (Placeholder link)
- Phone: 1-800-XXX-XXXX (Placeholder number)
