Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your KRAUS Bolden Commercial Style Kitchen Faucet, model KPF-1610CH. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.
Image: KRAUS Bolden Commercial Style Kitchen Faucet, Chrome finish. This image displays the overall design of the faucet, featuring its high-arc open-coil spring spout and single lever handle.
The KRAUS Bolden faucet is designed for modern kitchens, combining functionality with a commercial aesthetic. It features a high-arc open-coil spring spout and a 2-function pull-down sprayhead, offering both aerated stream and powerful spray options. The design incorporates Reach Technology for extended maneuverability and an easy-retract hose.
Setup and Installation
Before beginning installation, ensure all necessary components are present and that you have the required tools. This faucet is designed for single-hole, deck-mount installation.
Required Tools (Not Included):
- Adjustable Wrench
- Phillips Head Screwdriver
- Plumber's Putty or Silicone Sealant
- Safety Glasses
Installation Steps:
- Prepare the Mounting Surface: Ensure the sink or countertop has a single mounting hole with a diameter of 1.5 inches. The maximum deck thickness supported is 1 1/2 inches.
- Install the Faucet: Insert the faucet body into the mounting hole. Secure it from underneath the sink using the provided mounting hardware.
- Connect Water Supply Lines: Attach the pre-attached hot and cold water supply lines to your angle stops. Ensure connections are tight to prevent leaks.
- Test for Leaks: Turn on the water supply and check all connections for any signs of leakage.
Image: Detailed diagram showing the dimensions of the KRAUS Bolden faucet, including faucet height, spout height, spout reach, and mounting specifications. This aids in planning installation and verifying fit.
Image: Infographic highlighting key features such as heavy-duty construction, pull-down sprayer, premium ceramic cartridge, single lever handle, 1-hole installation, and installation-ready components. This illustrates the robust build and ease of setup.
Operating Instructions
Your KRAUS Bolden faucet is designed for intuitive and efficient use.
Water Flow and Temperature Control:
- The single lever handle controls both water flow and temperature.
- Move the handle up to increase water flow and down to decrease it.
- Rotate the handle left for hot water and right for cold water.
- The handle features a 90-degree forward rotation, allowing for installation in tight spaces without backsplash clearance.
Pull-Down Sprayhead Functionality:
- The sprayhead can be pulled down from the main spout for extended reach.
- Switch between aerated stream and powerful spray modes using the button on the sprayhead.
- The integrated Reach Technology ensures the hose retracts smoothly after use.
- The faucet spout swivels 180 degrees, and the sprayhead features a 360-degree swivel adapter for comprehensive sink coverage.
Image: A hand demonstrating the pull-down sprayhead functionality, showing water being sprayed into a colander of lemons. This highlights the flexibility and reach of the sprayer.
Image: Close-up views of the 360-degree swivel adapter, eco-friendly aerator, and soft rubber nozzles. This illustrates features enhancing maneuverability, water conservation, and ease of cleaning.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your KRAUS Bolden faucet.
Cleaning the Faucet:
- Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish.
- The chrome finish is wear-resistant and designed to resist corrosion and fading.
Cleaning the Sprayhead Nozzles:
- The sprayhead features soft rubber nozzles. Mineral build-up can be easily wiped away with your finger or a soft cloth.
- Regularly cleaning the nozzles ensures consistent spray performance.
Image: Close-up of a finger wiping the rubber nozzles of the sprayhead, demonstrating the easy-clean feature for removing mineral build-up.
Troubleshooting
If you encounter any issues with your KRAUS Bolden faucet, refer to the common problems and solutions below. For persistent issues, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator or mineral build-up in nozzles. | Remove and clean the aerator. Wipe rubber nozzles to remove mineral deposits. Check water supply lines for kinks. |
| Leaking from Faucet Base | Loose mounting nut or worn O-rings. | Tighten the mounting nut under the sink. If leaking persists, contact customer support for O-ring replacement. |
| Sprayhead Does Not Retract Fully | Weight on hose is obstructed or improperly positioned. | Ensure the counterweight on the hose under the sink is free from obstructions and correctly positioned. |
| Inconsistent Spray Pattern | Clogged sprayhead nozzles. | Wipe the rubber nozzles to clear any debris or mineral build-up. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Kraus |
| Model Name | Bolden |
| Part Number | KPF-1610CH |
| Finish Type | Chrome |
| Material | Brass (Faucet Body), Stainless Steel (Handle) |
| Mounting Type | Deck Mount |
| Installation Type | Single Hole |
| Number of Handles | 1 |
| Maximum Flow Rate | 1.8 Gallons Per Minute (GPM) |
| Overall Height | 18 3/4 inches |
| Spout Height | 6 1/4 inches |
| Spout Reach | 8 5/8 inches |
| Hose Length | 16 Inches (Pull-down hose) |
| Item Weight | 6.39 pounds |
| Mounting Hole Diameter | 1.5 Inches |
| Product Dimensions (Overall) | 10.75"D x 4.5"W x 18.75"H |
| Special Feature | Lead Free |
Image: Another detailed diagram illustrating the faucet's dimensions, including overall height, spout height, and spout reach, crucial for installation planning.
Warranty Information
KRAUS provides a Lifetime Limited Warranty for the Bolden Commercial Style Kitchen Faucet. This warranty covers defects in material and manufacturing workmanship under normal use. For full details regarding warranty coverage and claims, please refer to the official KRAUS website or contact customer support.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please contact KRAUS customer service.
- Website: Visit the official Kraus website for FAQs and support resources.
- Phone: Refer to your product packaging or the Kraus website for current contact numbers.
- Email: Contact support via email for non-urgent inquiries.
When contacting support, please have your model number (KPF-1610CH) and purchase date available.
