ThermoPro TP65
Contents
ThermoPro TP65 Indoor Outdoor Thermometer Digital Wireless Hygrometer Instruction Manual
Model: TP65
Product Overview
The ThermoPro TP65 is a digital wireless thermometer and hygrometer designed to monitor indoor and outdoor temperature and humidity. It features a large backlit touchscreen display for easy readability and can receive data from up to three remote sensors, providing comprehensive environmental monitoring for multiple locations.
- Large 4-inch LCD display with backlit touchscreen for clear readings.
- Measures indoor/outdoor temperatures and humidity percentages.
- Capable of displaying readings from up to 3 outdoor remote sensors.
- Records all-time/24-hour max and min temperature and humidity.
- Temperature/humidity trend arrows indicate environmental changes.
- 500ft/150m remote range with strong signal penetration (915 MHz).
- Multiple placement options: tabletop, wall-mountable, and magnetic back.

Package Contents
- Base station unit (Receiver) x 1
- Remote sensor (Transmitter) x 1
- AAA Batteries (included)
Setup
Battery Installation
- Open the battery compartment on both the main display unit and the remote sensor.
- Insert the included AAA batteries into both units, ensuring correct polarity (+/-). The main unit requires 2 AAA batteries, and the remote sensor requires 2 AAA batteries.
- Close the battery compartments securely.
Pairing the Units
The main unit and remote sensor are pre-paired at the factory. If they do not connect automatically, follow these steps:
- Place the main unit and remote sensor close to each other.
- Press and hold the "CH/SYNC" button on the main unit for 3 seconds to enter synchronization mode.
- Press the "TX" button inside the battery compartment of the remote sensor.
- The main unit should display the remote sensor's readings within a few minutes.
Placement Options
The ThermoPro TP65 offers versatile placement options for both the main unit and the remote sensor:
- Main Unit: Features a magnetic back for attachment to metal surfaces (e.g., refrigerator), a tabletop stand, and a hanging hole for wall mounting.
- Remote Sensor: Designed for outdoor use with a weather-resistant casing. It can be placed on a flat surface or mounted to a wall using a screw. Ensure it is protected from direct sunlight and heavy rain for optimal accuracy and longevity.

Operating Instructions
Display Overview
The large LCD display shows indoor and outdoor temperature and humidity readings. Key indicators include:
- OUT: Outdoor temperature and humidity.
- IN: Indoor temperature and humidity.
- CH1: Indicates the channel of the remote sensor (up to 3 channels supported).
- Trend Arrows: Up, down, or horizontal arrows indicate whether temperature/humidity is rising, falling, or stable.
- MAX/MIN: Displays the maximum and minimum recorded values for temperature and humidity over the last 24 hours or all time.

Button Functions
- CH/SYNC: Press to switch between remote sensor channels (CH1, CH2, CH3). Press and hold for 3 seconds to synchronize with remote sensors.
- Light Bulb Icon: Touch to activate the backlight for 15 seconds.
- °F/°C HISTORY: Touch to switch between Fahrenheit and Celsius temperature display. Press and hold to view 24-hour or all-time MAX/MIN records.
- MAX/MIN CLEAR: Touch to view MAX/MIN records. Press and hold to clear the MAX/MIN records.

Maintenance
- Cleaning: Wipe the unit clean with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
- Battery Replacement: Replace batteries in both the main unit and remote sensor when the low battery indicator appears on the display. Ensure to use fresh AAA batteries.
- Storage: If storing the unit for an extended period, remove the batteries to prevent leakage.
Troubleshooting
| Problem | Solution |
|---|---|
| No outdoor temperature/humidity reading (shows "---"). |
|
| Inaccurate readings. |
|
| Display is dim or blank. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | TP65 |
| Product Dimensions | 4.3 x 3.3 x 1 inches (Main Unit) |
| Weight | 6.08 ounces |
| Batteries | 4 AAA batteries required (included) |
| Remote Range | Up to 500ft / 150m |
| Connectivity Technology | Wireless (915 MHz enhanced) |
| Display Type | LCD with Backlight Touchscreen |
| Temperature Units | °F or °C |
| Manufacturer | ThermoPro |
| Country of Origin | China |
Warranty and Support
ThermoPro products are designed for reliability and performance. For warranty information and technical support, please refer to the documentation included with your purchase or visit the official ThermoPro website. When contacting support, please have your model number (TP65) and purchase details available.
For further assistance, you may visit the ThermoPro Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.