1. Introduction
Thank you for choosing the LAMPAOUS E27 A70 15W 6000K LED Bulb. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED bulb. Please read these instructions carefully before use and retain them for future reference.
2. Safety Instructions
- Ensure the power supply is switched off before installing or replacing the bulb.
- Do not use this bulb with dimmers. This is a non-dimmable bulb.
- Do not disassemble, modify, or attempt to repair the bulb.
- Avoid touching the bulb when it is operating or immediately after it has been switched off, as it may be hot.
- This bulb is designed for indoor use in dry environments. Do not expose to water or high humidity.
- Ensure the fixture is compatible with an E27 base and the bulb's wattage.
- Dispose of the bulb according to local regulations for electronic waste.
3. Product Overview
The LAMPAOUS E27 A70 LED bulb provides bright, cool white illumination with significant energy savings. It features a standard E27 Edison screw base and a frosted finish for diffused light.
Image 1: LAMPAOUS E27 A70 LED Bulb showing its dimensions. The bulb has a diameter of 60mm and a total height of 110mm, featuring an E27 screw base and the LAMPAOUS brand logo.
4. Setup and Installation
- Power Off: Before installation, ensure the power supply to the light fixture is completely switched off at the main switch or circuit breaker.
- Remove Old Bulb: If replacing an existing bulb, allow it to cool down completely before carefully unscrewing it counter-clockwise from the fixture.
- Install New Bulb: Gently screw the LAMPAOUS E27 LED bulb clockwise into the E27 socket until it is snug. Do not overtighten.
- Power On: Restore power to the light fixture.
Note: If the bulb does not light up, ensure it is securely screwed into the socket and the power supply is active.
5. Operation
The LAMPAOUS E27 A70 LED bulb operates like a standard light bulb. Simply switch on the power to the fixture to illuminate the bulb, and switch it off to turn it off. This bulb is designed for instant-on functionality.
Important: This bulb is non-dimmable. Attempting to use it with a dimmer switch may cause damage to the bulb or the dimmer, and will void the warranty.
6. Maintenance
- Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Replacement: When the bulb reaches the end of its lifespan, follow the "Setup and Installation" steps in reverse to safely remove and replace it.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. |
|
|
| Bulb flickers. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Brand | LAMPAOUS |
| Model Number | YF-HP-BULB-03-6XCW0917 |
| Light Type | LED |
| Base Type | E27 (Edison Screw) |
| Wattage | 15 Watts (equivalent to 100W incandescent) |
| Luminous Flux | 1500 Lumens |
| Color Temperature | 6000K (Cool White) |
| Dimmable | No (Non-Dimmable) |
| Color Rendering Index (CRI) | 60 |
| Dimensions (approx.) | 60mm (Diameter) x 110mm (Height) |
| GTIN/UPC | 614409945437 |
9. Warranty and Support
LAMPAOUS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the retailer's return policy or contact LAMPAOUS customer service through their official website or the platform where the product was purchased. Please have your model number (YF-HP-BULB-03-6XCW0917) and purchase details ready.
