Mobili Fiver First Extendable Console Table (Model CNSFIRPIN) Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Mobili Fiver First Extendable Console Table. Please read these instructions carefully before beginning assembly or use to ensure proper function and longevity of your product.

Important Safety Information

WARNING:

• Exercise caution when using sharp objects to open the packaging to avoid damaging the product.
• During assembly, place all parts on a soft surface, such as a carpet, to prevent scratching.
• Ensure all connections are secure before use to maintain stability.

Package Contents

Verify that all components are present before starting assembly:

• Extendable Console Table (main unit)
• 5 Extension Leaves
• Hardware Kit (screws, dowels, etc.)
• Assembly Instructions (this document)
• Central Iron Leg (for extended configurations)

Chairs are not included with this product.

Setup and Assembly

Assembly time is approximately 15 minutes. A screwdriver is recommended for assembly.

1. Unpacking: Carefully remove all components from the packaging. Place them on a soft, clean surface to prevent damage.
2. Leg Attachment: Attach the main legs to the console table frame using the provided hardware. Ensure all screws are tightened securely.
3. Familiarize with Extension Mechanism: The table features resistant aluminum guides for extension.
4. Initial Extension: To extend the table, gently pull the two halves apart. The aluminum guides will slide outwards.
5. Inserting Extension Leaves: Place the extension leaves into the gaps created by extending the table. Align the pins on the leaves with the corresponding holes in the table frame.
6. Securing Leaves: Push the table halves together to secure the leaves in place.
7. Central Support Leg: For configurations with 3 or more extension leaves, attach the central iron leg to provide additional stability. This leg screws into a designated point on the extension mechanism.

Operating the Extendable Table

The Mobili Fiver First table is designed for versatile use, transforming from a compact console to a dining table for up to 14 people.

Extension Steps:

1. Prepare for Extension: Ensure the area around the table is clear.
2. Separate Table Halves: Gently pull the two main halves of the table apart. The telescopic aluminum guides will extend.
3. Insert Leaves: Insert the desired number of extension leaves into the gap. Each leaf adds approximately 20.5 inches (52 cm) to the table length.
4. Secure Leaves: Once leaves are in place, push the table halves back together until they are flush and the leaves are securely locked by the pins.
5. Add Central Support: For configurations using 3, 4, or 5 leaves, screw in the central iron leg for enhanced stability.

Table Length Configurations:

• Closed: 17.7 inches (accommodates 2-4 people)
• 1 Extension: 38.2 inches (accommodates 4 people)
• 2 Extensions: 58.7 inches (accommodates 6 people)
• 3 Extensions: 79.1 inches (accommodates 10 people)
• 4 Extensions: 99.6 inches (accommodates 12 people)
• 5 Extensions: 120.1 inches (accommodates 14 people)

Instructional Video:

Maintenance

To maintain the appearance and functionality of your Mobili Fiver First Extendable Console Table, follow these guidelines:

• Cleaning: Wipe the laminate-finished surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Spills: Clean up spills immediately to prevent staining, as the table is not stain-resistant.
• Protection: Use placemats or coasters to protect the surface from heat, moisture, and scratches.
• Hardware: Periodically check and tighten all assembly hardware to ensure the table remains sturdy.
• Storage of Leaves: When not in use, store the extension leaves separately in a dry, safe place to prevent damage.

Troubleshooting

Table Instability:

• Issue: Table feels wobbly or unstable, especially when extended.
• Solution: Ensure the central iron leg is properly installed and tightened when using 3 or more extension leaves. Verify that all leg attachment screws are secure.

Difficulty Extending/Retracting:

• Issue: The table halves are difficult to slide or the leaves do not fit smoothly.
• Solution: Check for any obstructions in the aluminum guide rails. Ensure the leaves are inserted correctly, aligning the pins with the holes. Applying a small amount of silicone lubricant to the rails (avoiding contact with the table surface) may help smooth movement.

Specifications

Warranty Information

The Mobili Fiver First Extendable Console Table comes with a 2-year warranty. For specific terms and conditions, please refer to the warranty documentation included with your purchase or contact Mobili Fiver customer support.

Customer Support

For further assistance, questions, or to report any issues with your product, please contact Mobili Fiver customer support. You can also visit the official Mobili Fiver store for more information and products:

Visit the Mobili Fiver Store on Amazon