1. Introduction
The Mobili Fiver First Extendable Console Table is a versatile furniture piece designed to optimize space in your home. When closed, it functions as a compact console, and when extended, it transforms into a dining table capable of seating up to 14 people. This manual provides essential information for the safe assembly, operation, and maintenance of your Ashwood Black console table.
Figure 1: The console table in its compact, closed configuration.
Figure 2: The console table fully extended, ready for dining.
2. Safety Information
- Exercise caution when using sharp objects to open the product packaging to prevent damage to the table components.
- During assembly, place all parts on a soft surface, such as a carpet or blanket, to avoid scratching the finish.
- Ensure all hardware is securely tightened before using the table. Periodically check and re-tighten as needed.
- Do not overload the table. The maximum weight recommendation is 100 kilograms.
- Keep small parts and hardware out of reach of children.
- Always use the central iron leg when the table is extended with multiple leaves to ensure stability.
3. Package Contents
Verify that all components are present before beginning assembly:
- Main Console Table Frame
- 5 Extension Leaves
- Central Iron Leg (for support when extended)
- Hardware Kit (screws, bolts, etc.)
- Instruction Manual
4. Assembly Instructions
Assembly of the Mobili Fiver First Extendable Console Table is straightforward and typically takes approximately 15 minutes. A screwdriver is recommended for assembly.
4.1. Assembly Steps
- Unpack all components and lay them out on a protected surface.
- Identify the main console frame and the extension leaves.
- Attach any necessary hardware to the main console frame as indicated in the included hardware kit instructions.
- Familiarize yourself with the telescopic extension mechanism.
- Proceed to the operation section for guidance on extending the table and inserting the leaves.
4.2. Assembly and Operation Video Guide
For a visual guide on assembling and operating your extendable console table, please refer to the official instruction video below:
Video 1: Instructions for the Mobili Fiver First Extendable Console Table, demonstrating the extension process and leaf insertion.
5. Operation
The First Extendable Console Table features a telescopic mechanism for easy expansion.
5.1. Extending the Table
- Gently pull the two halves of the console table apart to reveal the extension mechanism.
- Insert the desired number of extension leaves into the designated slots. Ensure the pins on the leaves align with the holes in the table frame for a secure fit.
- For maximum stability when using three or more extension leaves, attach the central iron leg by screwing it into the pre-drilled hole underneath the table's center.
- Push the table halves together until they are flush with the inserted leaves.
5.2. Retracting the Table
- If used, remove the central iron leg.
- Gently pull the table halves apart.
- Remove the extension leaves one by one. Store the leaves separately when not in use.
- Push the table halves back together until they form the compact console.
5.3. Seating Capacity and Dimensions
The table's length and seating capacity vary based on the number of extension leaves used:
- Closed: 17.7 inches (Console)
- 1 Extension: 38.2 inches (4 people)
- 2 Extensions: 58.7 inches (6 people)
- 3 Extensions: 79.1 inches (10 people)
- 4 Extensions: 99.6 inches (12 people)
- 5 Extensions: 120.1 inches (14 people)
Figure 3: Dimensional diagram of the console table, closed and extended.
6. Maintenance
Proper care will ensure the longevity and appearance of your Mobili Fiver console table.
- Cleaning: Wipe the surface with a soft, damp cloth. For stubborn marks, use a mild, non-abrasive cleaner specifically designed for laminate surfaces. Avoid harsh chemicals, abrasive pads, or excessive moisture.
- Protection: Protect the table from direct sunlight, extreme temperatures, and humidity, which can cause warping or discoloration. Use coasters and placemats to prevent heat marks, scratches, and spills.
- Hardware: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain structural integrity.
- Storage: Store extension leaves in a dry, stable environment to prevent warping.
Figure 4: Close-up of the Ashwood Black laminate finish.
7. Troubleshooting
- Table feels unstable: Ensure the central iron leg is properly installed when the table is extended. Check and tighten all assembly hardware.
- Difficulty extending or retracting: Verify that the telescopic mechanism is free from obstructions. Ensure extension leaves are inserted correctly and aligned.
- Surface scratches or minor damage: For minor imperfections, specialized laminate repair kits may be available. Consult a professional for significant damage.
8. Specifications
| Brand | Mobili Fiver |
| Model Name | First |
| Model Number | CNSFIRPIN |
| Color | Ashwood Black |
| Material Type | Laminate-finished |
| Product Dimensions (Closed) | 17.72"D x 35.43"W x 29.92"H (45cm D x 90cm W x 76cm H) |
| Extended Length (Max) | 120.07 Inches (305cm) |
| Item Weight | 60 Kilograms |
| Maximum Weight Recommendation | 100 Kilograms |
| Number of Leaves | 5 |
| Table Extension Mechanism | Telescopic |
| Included Components | Assembly Hardware, Instructions |
9. Warranty Information
The Mobili Fiver First Extendable Console Table comes with a 2-year warranty. Please retain your proof of purchase for any warranty claims. The warranty covers manufacturing defects under normal use and service.
10. Support
For further assistance, questions, or to report any issues with your Mobili Fiver First Extendable Console Table, please contact Mobili Fiver customer support through their official website or the platform where the product was purchased.
