Introduction
Thank you for choosing the Altec Lansing ALP-L2200PK Lightning Series Speaker. This powerful Bluetooth speaker is designed for both indoor and outdoor use, featuring a robust audio system, dynamic party lights, and a built-in media player. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your speaker to ensure optimal performance and longevity.
Figure 1: Front view of the ALP-L2200PK speaker, showcasing the main woofer and integrated party lights.
Product Features
- Ultra Portable Design: Equipped with a built-in trolley handle and wheels for easy transport.
- High Power Output: Features 2,200 watts peak power with a 15-inch high excursion woofer and a 3.5-inch horn tweeter.
- Versatile Connectivity: Supports Bluetooth streaming with a range of up to 100 feet, USB and SD card media playback, FM radio, XLR, RCA, and AUX inputs.
- Dynamic Party Lights: User-controlled multi-color light show with 5 built-in modes to enhance your audio experience.
- Stereo Pairing: Ability to wirelessly pair with a second Lightning speaker for an immersive stereo sound experience.
- Included Accessories: Comes with a microphone and speaker stand.
Setup Guide
1. Unpacking
Carefully remove the speaker and all accessories from the packaging. Retain the packaging for future transport or storage.
2. Physical Placement
- Place the speaker on a stable, flat surface. For optimal sound dispersion, consider using the included speaker stand.
- Ensure adequate ventilation around the speaker to prevent overheating.
- The speaker is designed for both indoor and outdoor use, but it is not waterproof. Avoid exposure to rain or excessive moisture.
3. Power Connection
Connect the power cable to the AC input on the rear panel of the speaker and then to a standard electrical outlet.
Figure 2: Rear panel of the ALP-L2200PK, illustrating the various input and output connections.
4. Initial Power On
Locate the power switch on the rear panel and turn the speaker ON. The display will illuminate, indicating the speaker is ready for operation.
Operating Instructions
1. Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth mode (usually indicated on the display).
- On your mobile device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "ALP-L2200PK" from the list of devices. Once connected, a confirmation sound may play.
2. Media Player (USB/SD Card)
Insert a USB drive or SD card containing audio files into the respective slot on the control panel. The speaker will automatically detect the media and begin playback. Use the control panel buttons to navigate tracks and adjust volume.
3. FM Radio
Switch to FM radio mode using the mode button on the control panel. Use the tuning controls to scan for and select radio stations.
4. Wired Audio Inputs (XLR, RCA, AUX)
- XLR Input: For professional audio equipment like microphones or mixers.
- RCA Input: For connecting devices with RCA outputs (e.g., DVD players, older audio equipment).
- AUX Input: For connecting devices with a 3.5mm audio jack (e.g., smartphones, MP3 players).
Connect your audio source to the appropriate input on the rear panel. Select the corresponding input mode on the speaker's control panel.
5. Stereo Pairing (BT-LINK)
To create a wireless stereo pair with another Altec Lansing Lightning Series speaker (e.g., GSP-L2200PK), ensure both speakers are powered on and in Bluetooth mode. Follow the BT-LINK instructions provided with your second speaker to establish the connection. Once paired, audio will play in stereo across both units.
6. Party Lights Control
Use the dedicated light control buttons on the speaker's panel to cycle through the 5 built-in light modes, adjust colors, or turn the lights off. The lights can pulse with the beat of the music or maintain a steady glow.
7. Microphone Usage
Connect the included microphone to the designated microphone input on the rear panel. Adjust the microphone volume using the dedicated control.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the speaker. Do not use abrasive cleaners, waxes, or solvents.
- Storage: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ventilation: Ensure the speaker's vents are not blocked during operation to prevent overheating.
- Power Cord: Regularly inspect the power cord for any damage. If damaged, discontinue use and contact customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; Power switch off; Blown fuse; Power outlet issue. | Ensure power cable is securely connected. Turn power switch ON. Check the fuse (refer to specifications for type). Test the power outlet with another device. |
| No sound | Volume too low; Incorrect input mode selected; Audio source issue; Damaged speaker component. | Increase master volume and input volume. Select the correct input mode (Bluetooth, AUX, USB, etc.). Verify audio source is playing. If only tweeter works and subwoofer does not, contact customer support. |
| Bluetooth pairing failure | Speaker not in pairing mode; Device too far; Interference; Device's Bluetooth off. | Ensure speaker is in Bluetooth pairing mode. Move device closer to speaker. Avoid strong electromagnetic interference. Turn Bluetooth on/off on your device. |
| Party lights not working | Lights turned off; Mode selected does not show lights. | Press the light control button to cycle through modes or turn lights on. |
| Speaker overheating | Blocked ventilation; Prolonged high volume use. | Ensure vents are clear. Reduce volume and allow speaker to cool down. If issue persists, discontinue use and contact customer support. |
Specifications
Figure 3: Dimensions of the ALP-L2200PK speaker.
| Feature | Detail |
|---|---|
| Model Name | ALP-L2200PK |
| Brand | Altec Lansing |
| Speaker Type | Woofer (15 Inches), Horn Tweeter (3.5 Inches) |
| Peak Power Output | 2200 Watts |
| Connectivity Technology | Bluetooth, USB, SD Card, XLR, RCA, AUX |
| Bluetooth Range | Up to 100 Feet |
| Audio Output Mode | Stereo (with BT-LINK pairing) |
| Dimensions (L x W x H) | 36D x 43W x 71H Centimetres (14.17D x 16.93W x 27.95H Inches) |
| Item Weight | 20 kg (44.09 lbs) |
| Material | ABS |
| Color | Blue (referring to woofer color) |
| Included Components | Speaker, Microphone, Speaker Stand |
| Recommended Use | Indoor, Outdoor |
| Waterproof | No |
Warranty and Support
For detailed warranty information, please refer to the warranty card included with your product or visit the official Altec Lansing website.
If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact Altec Lansing customer support. Contact details can typically be found on the product packaging or the official brand website.
Altec Lansing Official Website: https://alteclansing.com/
