1. Introduction
This manual provides essential information for the safe and effective use of your Vigor V5025 Impact Socket. The Vigor V5025 is an extra thin-walled impact socket designed for specific applications, particularly for driveshaft fittings within wheel hubs where space is limited. This specific model features a 20 mm (3/4 inch) square drive and a 24 mm external double hexagonal profile. It is suitable for vehicles requiring a 24 mm spanner size, such as the VW Touran (year of manufacture 2006 onwards).
Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage or injury.
2. Safety Information
Always adhere to the following safety guidelines when using the Vigor V5025 Impact Socket:
- Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, to protect against potential hazards.
- Ensure the impact socket is correctly seated on the fastener and the impact driver before operation.
- Use only with impact drivers that are compatible with a 3/4 inch square drive.
- Do not use damaged or worn sockets. Inspect the socket for cracks or deformation before each use.
- Avoid applying excessive force beyond the tool's intended capacity.
- Keep hands and loose clothing away from rotating parts during operation.
- Store the socket in a clean, dry place away from corrosive materials.
3. Setup
Before using the Vigor V5025 Impact Socket, ensure you have the following:
- A compatible impact driver with a 3/4 inch square drive.
- The fastener (e.g., driveshaft nut) to be engaged, which should have a 24 mm external double hexagonal profile.
- Clean the socket and the fastener to remove any dirt or debris that could affect engagement.
Installation Steps:
- Select the Vigor V5025 Impact Socket (24 mm).
- Align the 3/4 inch square drive end of the socket with the drive anvil of your impact driver.
- Push the socket firmly onto the impact driver until it locks securely in place. Ensure it is fully seated to prevent slippage during operation.
Figure 1: The Vigor V5025 Impact Socket, showing its robust construction and size markings.
4. Operating Instructions
The Vigor V5025 Impact Socket is designed for efficient fastening and loosening of specific nuts, particularly in confined spaces like wheel hubs.
Usage Steps:
- With the socket securely attached to the impact driver, position the socket over the 24 mm external double hexagonal fastener.
- Ensure the socket is fully engaged with the fastener, sitting squarely and without wobble. The extra thin-walled design allows access in tight areas.
- Activate the impact driver. For loosening, apply counter-clockwise rotation. For tightening, apply clockwise rotation.
- Maintain a firm grip on the impact driver and apply steady pressure. Allow the impact mechanism to do the work.
- Once the fastener is loosened or tightened to the desired specification (refer to vehicle manufacturer's torque specifications for tightening), release the impact driver trigger.
- Carefully remove the socket from the fastener and then from the impact driver.
Figure 2: An impact socket, similar to the Vigor V5025, being used with an impact driver on a vehicle's wheel hub. This demonstrates the typical application for such a tool.
5. Maintenance
Proper maintenance ensures the longevity and performance of your Vigor V5025 Impact Socket:
- Cleaning: After each use, wipe the socket clean with a dry cloth to remove dirt, grease, or metal shavings. For stubborn grime, a mild degreaser can be used, followed by thorough drying.
- Inspection: Regularly inspect the socket for any signs of wear, cracks, chips, or deformation, especially around the drive end and the hexagonal profile. Discontinue use if damage is found.
- Storage: Store the socket in a tool tray or box in a dry environment to prevent rust and corrosion. Avoid storing with other tools that could cause impact damage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Socket slips on fastener. | Incorrect size; Worn fastener; Worn socket profile; Socket not fully engaged. | Ensure correct 24 mm socket size. Inspect fastener for wear. Inspect socket for wear and replace if necessary. Ensure full engagement before operating. |
| Socket does not fit on impact driver. | Incorrect drive size; Debris in drive hole; Damaged drive hole. | Verify impact driver has a 3/4 inch square drive. Clean drive hole. Inspect for damage and replace if necessary. |
| Socket appears damaged after use. | Excessive force; Misalignment; Defective socket. | Avoid over-torquing. Ensure proper alignment during use. If damage occurs under normal use, contact support. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Vigor |
| Model Number | Vigor_V5025 |
| Material | Metal |
| Finish Type | Painted |
| Number of Pieces | 1 |
| Drive Size | 20 mm (3/4 inch) Square Drive |
| Output Profile | External Double Hexagonal |
| Spanner Size (Output Diameter) | 24 mm (35 mm overall output diameter) |
| Length | 44 mm |
| Item Weight | 8.9 ounces |
| Product Dimensions | 5.08 x 1.89 x 2.68 inches |
| Special Feature | Extra thin-walled for confined spaces, particularly robust for impact drivers. |
8. Warranty Information
The Vigor V5025 Impact Socket comes with a manufacturer's warranty. Please refer to the original purchase documentation or the manufacturer's official website for the most current and detailed warranty terms and conditions.
Based on available information, a warranty period of 24 months is typically offered. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, alteration, or normal wear and tear.
To make a warranty claim, retain your proof of purchase and contact Vigor customer support.
9. Support
For technical assistance, product inquiries, or warranty claims, please contact Vigor customer support through their official channels. You can typically find contact information on the Vigor website or through your product retailer.
When contacting support, please have your product model (Vigor V5025) and proof of purchase readily available.
