1. Product Overview
The Kramer C-HM/HM/PICO/YL-6 is a 6-foot ultra-slim, high-speed HDMI cable with Ethernet capabilities, designed for efficient and reliable audio/video transmission. Its slim HDMI connector and narrower cable diameter facilitate easier installation in confined spaces, such as behind televisions or within equipment cabinets. This cable supports advanced resolutions up to 4K@60Hz (4:4:4), ensuring high-quality visual and audio experiences.
Figure 1: Close-up of the Kramer C-HM/HM/PICO/YL-6 HDMI cable's yellow connectors, highlighting the ultra-slim design.
2. Key Features
- Ultra-Slim Design: Features a slim HDMI connector and a narrower cable diameter (0.39 inches) for easy routing and installation in tight spaces.
- High-Speed Performance: Supports high-speed data transfer, essential for modern audio/video applications.
- 4K@60Hz (4:4:4) Support: Capable of transmitting video resolutions up to 4K at 60 frames per second with full 4:4:4 chroma subsampling, ensuring vibrant and accurate colors.
- Ethernet Channel: Includes an HDMI Ethernet Channel (HEC) for network connectivity over the HDMI cable, reducing the need for separate Ethernet cables.
- Audio Return Channel (ARC): Supports ARC functionality, allowing audio to be sent from a display back to an AV receiver or sound system.
- CEC (Consumer Electronics Control) Compliant: Enables control of multiple devices through a single remote control.
- Male-to-Male Connectors: Equipped with standard male HDMI connectors on both ends for universal compatibility.
- Durable Construction: Designed for reliability and longevity.
3. Setup and Installation
Follow these steps to properly connect your Kramer C-HM/HM/PICO/YL-6 HDMI cable:
- Identify Ports: Locate the HDMI output port on your source device (e.g., laptop, Blu-ray player, gaming console) and the HDMI input port on your display device (e.g., TV, monitor, projector). Ensure both devices are powered off before connecting.
- Connect Source: Gently insert one end of the Kramer HDMI cable into the HDMI output port of your source device. Ensure the connector is fully seated and secure.
- Connect Display: Insert the other end of the HDMI cable into the HDMI input port of your display device. Again, ensure a firm and secure connection.
- Power On Devices: Once the cable is securely connected, power on your display device first, then your source device.
- Select Input: On your display device, use the remote control or on-screen menu to select the correct HDMI input source that corresponds to the port you used.
Figure 2: Example setup showing the Kramer HDMI cable connecting a laptop to a monitor.
Figure 3: Side profile of the ultra-slim HDMI connector, illustrating its compact form factor.
4. Operation
The Kramer C-HM/HM/PICO/YL-6 HDMI cable is a passive component designed to transmit digital audio and video signals. Once properly connected between compatible devices, it operates automatically. Ensure your source device is outputting a signal and your display device is set to the correct HDMI input. The cable will facilitate the transfer of high-definition video and multi-channel audio, including support for Ethernet data if both connected devices are HEC-enabled.
5. Maintenance and Care
To ensure the longevity and optimal performance of your HDMI cable, follow these maintenance guidelines:
- Avoid Sharp Bends: Do not bend the cable sharply, especially near the connectors, as this can damage the internal wires and affect signal integrity.
- Handle Connectors Carefully: Always grasp the connector housing when plugging or unplugging the cable, rather than pulling on the cable itself.
- Keep Clean: If connectors become dusty or dirty, gently clean them with a dry, lint-free cloth. Avoid using liquids or abrasive cleaners.
- Proper Storage: When not in use, coil the cable loosely and store it in a cool, dry place away from direct sunlight or extreme temperatures. Avoid tangling with other cables.
- Protect from Damage: Keep the cable away from pets, sharp objects, and heavy furniture that could pinch or cut it.
Figure 4: The Kramer C-HM/HM/PICO/YL-6 HDMI cable coiled for storage.
6. Troubleshooting
If you encounter issues with your HDMI connection, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No picture or sound | Loose connection, incorrect input selected, incompatible resolution. | Ensure both ends of the HDMI cable are securely connected. Verify the display is set to the correct HDMI input. Try a different resolution setting on your source device. |
| Flickering picture or intermittent signal | Cable damage, signal interference, resolution too high for cable/device. | Check the cable for visible damage. Ensure the cable is not near strong electromagnetic interference sources. Lower the resolution or refresh rate on your source device. |
| Poor picture quality (e.g., grainy, distorted colors) | Cable integrity issue, source/display settings. | Ensure the cable is not bent or damaged. Check color settings on both source and display devices. |
| No audio | Audio settings on source/display, ARC not enabled. | Verify audio output settings on your source device and audio input settings on your display/receiver. Ensure ARC is enabled on both devices if using that feature. |
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | Kramer |
| Model Number | 97-0132306 |
| ASIN | B075MP3LSL |
| Product Dimensions | 72.01 x 0.39 x 0.39 inches (6 feet length) |
| Item Weight | 1.76 ounces |
| Connector Type | HDMI Male-to-Male |
| Cable Type | HDMI with Ethernet |
| Color | Yellow |
| Supported Resolution | Up to 4K@60Hz (4:4:4) |
| Special Feature | High Speed, Ultra Slim, Ethernet Channel, ARC, CEC |
| Compatible Devices | Television, Monitors, Projectors, Blu-ray Players, Gaming Consoles, Laptops, etc. |
| Manufacturer | Kramer |
| Date First Available | September 15, 2017 |
8. Warranty and Support
For information regarding the warranty period and terms for your Kramer C-HM/HM/PICO/YL-6 HDMI cable, please refer to the official Kramer website or contact Kramer customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.
For technical assistance, product inquiries, or support, please visit the official Kramer website or contact their customer service department. You can often find support resources, FAQs, and contact information on their brand store page:
