1. Introduction
Thank you for choosing the deleyCON Universal TV Wall Mount W68. This manual provides detailed instructions for the safe and correct installation and operation of your wall mount. Please read this manual thoroughly before installation and keep it for future reference. This wall mount is designed for televisions and displays ranging from 60 to 100 inches (152-254cm) with a maximum weight capacity of 75kg (165 lbs) and VESA compatibility up to 900x600.
2. Safety Information
WARNING: Improper installation may result in serious personal injury and property damage. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.
- Ensure the mounting surface can safely support the combined weight of the mount and the display.
- Do not exceed the maximum weight capacity of 75kg (165 lbs).
- Verify the VESA pattern of your TV is compatible with the mount (200x200 to 900x600).
- Always use appropriate safety equipment and tools during installation.
- Do not overtighten screws, as this may cause damage.
- Keep children and pets away during installation.
- This product is intended for indoor use only.
3. Package Contents
Before installation, please check that all components are present and undamaged. Refer to the image below for a visual representation of the package contents.
Image 3.1: Overview of deleyCON TV Wall Mount W68 components. This includes the main wall plate, two vertical TV brackets, a spirit level, and an assortment of screws, washers, and wall anchors for different installation types.
- Wall Plate
- TV Brackets (2x)
- Spirit Level
- Mounting Hardware (screws, washers, anchors for various wall types)
- Instruction Manual
4. Setup and Installation
4.1 Pre-Installation Checks
- TV Compatibility: Ensure your TV's screen size is between 60-100 inches and its weight does not exceed 75kg (165 lbs).
- VESA Compatibility: Check the VESA mounting pattern on the back of your TV. This mount supports VESA patterns from 200x200mm up to 900x600mm. Refer to the diagram below for common VESA standards.
Image 4.1: VESA Standards Compatibility. This diagram illustrates various VESA mounting patterns (e.g., 100x100mm, 200x200mm, 400x400mm, 900x600mm) and indicates which are supported by the deleyCON W68 mount.
- Wall Type: Determine your wall type (e.g., solid concrete, wood stud, brick) and use the appropriate mounting hardware.
- Tools Required: Drill, stud finder (for wood studs), level, pencil, measuring tape, screwdriver, socket wrench.
4.2 Mounting the Wall Plate
- Marking: Position the wall plate on the desired location on the wall. Use the integrated spirit level to ensure it is perfectly horizontal. Mark the drill holes with a pencil.
- Drilling: Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the anchors being used.
- Securing: Insert wall anchors (if required) into the drilled holes. Align the wall plate with the holes and secure it to the wall using the appropriate screws and washers. Ensure the wall plate is firmly attached and level.
Image 4.2: Installation Steps. This image shows a three-step process: 1) Attaching brackets to the TV, 2) Mounting the wall plate to the wall, and 3) Hanging the TV onto the wall plate.
4.3 Attaching TV Brackets
- Carefully place your TV face down on a soft, clean surface to prevent scratches.
- Attach the two vertical TV brackets to the back of your TV using the screws and washers that fit your TV's VESA pattern. Ensure the brackets are oriented correctly (hooks facing downwards).
- Tighten the screws securely, but do not overtighten.
4.4 Hanging the TV
- With assistance, carefully lift the TV and hook the attached brackets onto the wall plate.
- Ensure both brackets are securely seated on the wall plate.
- Engage the safety locking mechanism (usually a pull-cord or screw) at the bottom of the TV brackets to prevent accidental dislodgement. Refer to the image below for the locking mechanism.
Image 4.3: TV Brackets with Safety Pull-Cords. This image shows the two vertical TV brackets attached to the wall mount, highlighting the pull-cords used to release the safety locking mechanism when removing the TV.
5. Operating the Tilt Function
The deleyCON W68 wall mount features a continuous tilt function, allowing you to adjust the viewing angle from -10° to +5°.
- To adjust the tilt, locate the tilt adjustment knobs or levers on the side of the TV brackets.
- Loosen the knobs/levers to allow the TV to tilt freely.
- Gently tilt the TV to your desired angle.
- Tighten the knobs/levers to secure the TV in place.
Image 5.1: Tilt Adjustment Mechanism. This image displays the side profile of the mounted TV, illustrating the range of tilt motion from -10° to +5° and the 85mm distance from the wall.
6. Maintenance
- Periodically check all screws and connections to ensure they remain tight and secure.
- Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Do not hang anything from the TV or the mount.
7. Troubleshooting
- TV is not level: Ensure the wall plate was installed level. If not, adjust the wall plate or use the fine-tuning adjustments on the TV brackets if available.
- Mount feels loose: Re-check all mounting screws on both the wall plate and the TV brackets. Ensure they are tightened securely. If the issue persists, consult a professional.
- Cannot tilt the TV: Ensure the tilt adjustment knobs/levers are loosened before attempting to tilt.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | MK-W-68 |
| Screen Size Compatibility | 60" - 100" (152 - 254 cm) |
| Maximum Weight Capacity | 75 kg (165 lbs) |
| VESA Compatibility | 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 600x400, 600x600, 800x600, 900x600 mm |
| Tilt Angle | -10° to +5° |
| Distance to Wall | 8.5 cm |
| Material | Alloy Steel |
| Color | Black |
9. Warranty Information
deleyCON products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official deleyCON website. Keep your proof of purchase for warranty claims.
10. Customer Support
If you have any questions regarding the installation, operation, or troubleshooting of your deleyCON Universal TV Wall Mount W68, please contact deleyCON customer support. Contact information can typically be found on the product packaging or the official deleyCON website.