Introduction
This manual provides essential instructions for the safe installation, operation, and maintenance of your Hampton Bay Low-Voltage 2.7-Watt Sand Outdoor Integrated LED Landscape Modern Down Light Path Light. Please read this manual thoroughly before installation and retain it for future reference.
Safety Information
- CAUTION: Only for use with low voltage lighting power units with a maximum output rating of 15V, 300W per secondary. Exceeding these limits can damage the fixture and pose a safety risk.
- Ensure the power supply is disconnected before installation, maintenance, or cleaning.
- This product is designed for outdoor use and is water resistant. However, avoid submerging the fixture in water.
- Do not attempt to modify or disassemble the integrated LED light source. It is not user-serviceable.
- Keep children and pets away from the installation area.
- If you are unsure about any part of the installation process, consult a qualified electrician.
Package Contents
Verify that all components are present before beginning installation:
- 1x Hampton Bay Low-Voltage LED Path Light (Model HD38989SD)
- 1x Easy-Clip Connector
- 1x 12-inch Wire Lead
- 1x Ground Stake (pre-attached or separate, for stake mount)
Image: Front view of the Hampton Bay LED Pathway Light product box, showing the light fixture and branding.
Setup and Installation
This path light is designed for easy installation with a low-voltage landscape lighting system. Assembly is required.
- Plan Layout: Determine the desired location for your path light. Ensure it is within reach of your low-voltage power unit's main cable.
- Assemble Fixture: If the ground stake is not pre-attached, securely fasten it to the base of the light fixture.
- Position Fixture: Gently push the ground stake into the soil at your chosen location. Ensure the fixture is stable and upright.
- Connect to Main Cable: Locate the 12-inch wire lead extending from the path light. Use the provided easy-clip connector to attach the light's wire lead to the main low-voltage landscape cable. Ensure a secure connection by following the connector's instructions. The easy-clip connector pierces the main cable insulation to make contact.
- Test: Once all connections are made, turn on your low-voltage power unit to test the light. If the light does not illuminate, check all connections and ensure the power unit is functioning correctly.
Image: Back view of the Hampton Bay LED Pathway Light product box, illustrating dimensions, easy-clip connector, and light pattern.
Operating Instructions
The Hampton Bay Low-Voltage LED Path Light operates as part of your existing low-voltage landscape lighting system. It does not have an independent switch or control mechanism.
- Power On/Off: The light will turn on and off with your low-voltage power unit. Control the light's operation using the timer, photocell, or manual switch on your power unit.
- Light Output: The integrated LED provides a warm white light at 135 lumens. No adjustments to brightness or color temperature are available on the fixture itself.
Maintenance
Regular maintenance ensures optimal performance and longevity of your path light.
- Cleaning: Periodically wipe the fixture with a soft, damp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents, as these can damage the finish.
- Inspection: Annually inspect the wiring and connections for any signs of damage, corrosion, or loose connections. Ensure the ground stake remains firmly in place.
- LED Module: The LED light source is integrated and designed for long-term use. It is not replaceable. Do not attempt to open the sealed LED module.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or is dim. |
|
|
Specifications
| Brand | Hampton Bay |
| Model Number | HD38989SD |
| UPC | 627442083592 |
| Type | Low-Voltage Integrated LED Path Light |
| Wattage | 2.7 Watts |
| Brightness | 135 Lumens |
| Efficiency | 50 Lumens per Watt |
| Light Color | Warm White (2800K-3200K) |
| Voltage | 10V (Max 15V input from power unit) |
| Material | Metal |
| Finish | Sand |
| Dimensions (H x W x L) | 20.7 in x 6.5 in x 5.1 in (52.5 cm x 16.5 cm x 12.9 cm) |
| Item Weight | 1.35 lbs (0.61 kg) |
| Installation Type | Stake Mount (Floor Mount/Pole Mount) |
| Connectivity | Wired (Low-Voltage) |
| Water Resistance | Water Resistant |
| Assembly Required | Yes |
Warranty and Support
This Hampton Bay product is backed by a 5-Year Limited Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or replacement parts, please contact Hampton Bay Customer Service. You may need your proof of purchase and the product model number (HD38989SD).
Contact Information: Refer to the contact details provided with your product packaging or visit the official Hampton Bay website for the most current support information.
